Easy
Less than 15 minutes
This burner tube helps to cook your food on your gas grill by allowing gas to flow through the small holes or ports along its length, where it mixes with air and ignites to produce a flame. It is 17-3/4 inches long and has an outer diameter of 5/8 inches. It features a vented venturi end, a 90-degree bend, and a center slotted mounting hole at the back end. The burner tube is typically found underneath the heat tents, running parallel to it. If you notice signs like uneven flames, weak heat output, frequent clogs, or visible damage such as rust or corrosion, the burner tube needs to be replaced. To do so, you will need pliers and a screwdriver. Use these tools to remove the cooking grates, heat tents, and the holding pins and brackets that secure the tube to the grill box. Keep in mind that this OEM replacement part is sold individually, so verify the quantity needed for your appliance before making your purchase.
Main Burner-tube Burner G470-5200-W1
OEM part for: Char-Broil
Part Number: G470-5200-W1
Install
Videos!
Repair Video
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 16 machines
Char-Broil
This item works with the following types of products:
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Main Burner-tube Burner
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Carryover tubes had corroded. Burners looked like they could use some freshening up as well
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
2. Tried to remove the hitch pins from the carryover tubes but they wouldn't budge. So just pulled out the corroded tubes with pliers.
3. Pulled the hitch pins on the burners and slid those out.
4. Slid the new burners in place and secured the hitch pins
5. Put the carryover tubes in place. Did NOT need to tighten the screws on the burners. Put the hitch pins in.
6. Fired up the grill and enjoyed dinner!
rust
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Original Burner Tubes had rusted out. Holes caused uneven flame.
Tool Type
Outdoor Grill
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Remove holding pins at one end and flame travel brackets at the other. Hardest part was some holding pins had rusted in place. Took a little time to remove but got it done. Removed burnt out burner tubes, this was easy. Put in new burner tubes and new holding pins. This was also easy. Put in new flame travel tents between burner tubes and pins. Put in new tents. Put back grates. Burners lighted right away. Works perfect again.
Was rusted out from age
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Original equipment became became brittle and weak
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
