Product Information
Description:
| This is a genuine manufacturer supplied replacement part designed for use with Weber grills. This is the button switch which is used to turn the lights on and off. Your gas grill comes with control knobs that light up, allowing you to fine tune heat settings, even in low light conditions. Handle Light has a built-in "Tilt Sensor". The light will come on when the grill lid is open. The light will turn off when the lid is closed. For daytime use, deactivate the sensor by pressing light switch. Replacing this item is easy and does not require any tools • Unplug the wires from the old switch • Unscrew the collar that holds module to the unit • Secure new switch in place with the collar • Connect the wires and test the unit |
Compatibility
the 18 compatible machines
This part is compatible with the following machines:
Weber
2730501 (2009) Summit 460 Built-In Gas Grill
2740001 (2008) Summit S-470 Gas Grill
2740301 (2009) Summit S-470 Gas Grill
2770501 (2009) Summit 660 Built-In Gas Grill
2780001 (2008) Summit S-670 Gas Grill
2780301 (2009) Summit S-670 Gas Grill
2830501 (2009) Summit 460 Built-In Gas Grill
2840001 (2008) Summit S-470 Gas Grill
2840301 (2009) Summit S-470 Gas Grill
2740001 (2008) Summit S-470 Gas Grill
2740301 (2009) Summit S-470 Gas Grill
2770501 (2009) Summit 660 Built-In Gas Grill
2780001 (2008) Summit S-670 Gas Grill
2780301 (2009) Summit S-670 Gas Grill
2830501 (2009) Summit 460 Built-In Gas Grill
2840001 (2008) Summit S-470 Gas Grill
2840301 (2009) Summit S-470 Gas Grill
2870501 (2009) Summit 660 Built-In Gas Grill
2880001 (2008) Summit S-670 Gas Grill
2880301 (2009) Summit S-670 Gas Grill
92740301 (2010) Summit 470 Gas Grill
92780301 (2010) Summit 670 Gas Grill
92840301 (2010) Summit 470 Gas Grill
92880301 (2010) Summit 670 Gas Grill
92741301 (2010)(LP) Summit E-470 Grill - Black
92781301 (2010)(LP) Summit E-670 Grill - Black
2880001 (2008) Summit S-670 Gas Grill
2880301 (2009) Summit S-670 Gas Grill
92740301 (2010) Summit 470 Gas Grill
92780301 (2010) Summit 670 Gas Grill
92840301 (2010) Summit 470 Gas Grill
92880301 (2010) Summit 670 Gas Grill
92741301 (2010)(LP) Summit E-470 Grill - Black
92781301 (2010)(LP) Summit E-670 Grill - Black
Repair Guides
![]()
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Questions & Answers for Light Switch
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
8 of 9 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Nutdriver
Rubber switch cover deterriorated and made switch inoperative.
Project was to replace the switch for burner knob lights on a Weber 470 grill. Went on-line to learn how to access switch.
Removed knob panel to find switch. This only required opening the cabinet doors and removing 2 screws. Disconnected wires and squeezed prongs to remove old switch. Reversed process to complete project. Works great!
Removed knob panel to find switch. This only required opening the cabinet doors and removing 2 screws. Disconnected wires and squeezed prongs to remove old switch. Reversed process to complete project. Works great!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
Broken/Degraded OEM Weber light switch
Use pliers to squeeze base of switch through hole in instrument/knob panel (it's not hard, but you'll have to contort your hands a bit to access the back of the light switch).
Leave the wires on the old switch until it's through the panel. Then simply disconnect one wire at a time from the old switch and connect to the new switch! After both wires are connected to the new switch, push it through the instrument panel until it clicks into place.
Leave the wires on the old switch until it's through the panel. Then simply disconnect one wire at a time from the old switch and connect to the new switch! After both wires are connected to the new switch, push it through the instrument panel until it clicks into place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Outdoor Grill
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Switch could not be installed. It was mechanically different and not a replacement.
Remove the control panel from then, removed the panel. Then pressed on the side of the switch to remove it from the housing. Exchanged the wire from the old switch to the new one, then pressed the the switch back in the panel. Replace the panel. Pushed replacement knobs on to the shafts. Tested for clearance and operation. Done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Original light switch broke because of age.
1 Removed two screws from the bottom of the control panel.
2 Removed control knobs.
3 Lifted control panel cover off to expose the back of the switch.
4 Used pliers to remove switch from panel.
5 Disconnect wires from old switch.
6 Pushed new switch through panel opening
7 Connect wires to new switch.
8 Replaced panel with screws.
9 Put knobs back in place.
2 Removed control knobs.
3 Lifted control panel cover off to expose the back of the switch.
4 Used pliers to remove switch from panel.
5 Disconnect wires from old switch.
6 Pushed new switch through panel opening
7 Connect wires to new switch.
8 Replaced panel with screws.
9 Put knobs back in place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
It was 15 years old and the rubber cover on the button deteriated and fell apart
Take all the control knobs off the front open both front doors and remove the two Philips head screws one on each side of the control panel remove the control panel being careful of the wiring pinch the retainers at the bottom of the switch remove the two wires the insert the new switch and connect the two wires then reinstall the front control panel and the knobs.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Nutdriver
Rubber around switch that covers it & protects the switch had deteriorated because of sun & heat.
Removed knobs from all burner controls.
Removed 2 screws holding the panel to the grill.
Removed switch retaining nut from panel.
Removed panel from grill.
Replaced switch, connected wires.
Reinstalled panel & controlknobs.
Removed 2 screws holding the panel to the grill.
Removed switch retaining nut from panel.
Removed panel from grill.
Replaced switch, connected wires.
Reinstalled panel & controlknobs.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools needed
original switch failed
Removed wires from old switch, placed them on new switch, dropped switch in place, and voila-done!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Plate fell apart
Removed 4 screw
Replaced part
Reinstalled 4 screws
Replaced part
Reinstalled 4 screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The rubber boot seal around the switch deteriorated
My hand would not fit behind the control panel, so I had to remove the control panel
I removed the control knobs.
Removed 2 screws holding the control panel on and lifted off the control panel.
Removed the wires, squeezed the spring clip on the switch and pushed the switch out.
Inserted the new switch and attached the wires.
Set the control panel back onto the grill and reinstalled the two screws.
Put the knobs back on and the job was complete.
I removed the control knobs.
Removed 2 screws holding the control panel on and lifted off the control panel.
Removed the wires, squeezed the spring clip on the switch and pushed the switch out.
Inserted the new switch and attached the wires.
Set the control panel back onto the grill and reinstalled the two screws.
Put the knobs back on and the job was complete.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Replaced the light switch due to rubber weather seal bad
I did not want to remove the front panel to replace switch, too much work. I used a long screw driver to depress the clips that hold the switch in. I did one side at a time but would have been easier if I had another person to help pry the switch up when depressing the hold down clips. Pulled the switch up, then removed the wires to install on the new switch.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
5 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
. Fit perfectly.
Exactly like the factory original
John -
September 3, 2022
Verified Purchase
I received the correct part in a short time
Ordering was fast and simple and delivered in good condition.
Guest -
September 14, 2021
Verified Purchase
Fast delivery. Great replacement part
Part arrived quickly and worked great on my grill!
Guest -
August 27, 2021
Verified Purchase
Easy replacement and perfect fit
Great condition and fast delivery and service
Anonymous -
June 23, 2021
Verified Purchase
Perfect replacement
Perfect replacement.
Guest -
January 23, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
Repair Guides
![]()
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
