Product Information
Description:
| This is a genuine OEM sourced replacement part designed for use with Black and Decker trimmers/edgers. This lever is an important part of the spool trimmer head assembly. It is made out of plastic and it is sold individually. No tools are needed to replace this item, simply snap it in the slot. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
the 9 compatible machines
Products Compatibility
This item works with the following types of products:
- • Edger
- • Trimmer
Questions & Answers for Lever
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
7 of 7 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers
Lever was broken, preventing the trimmer from feeding/holding back trim line
Pliers used to pull off bad/sheared off lever. Replaced lever with new lever. Easy. Great to be able to replace the part instead of replacing the trimmer. Works like new with replacement lever.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 7 people found this instruction helpful
Tool Type:
Trimmer
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Needle nose pliers
Switch replacement & lever replacement on line spool
Parts arrived in the mail - accuracy of the order was spot on!
Downloaded the parts diagram for the trimmer....on the internet
Removed screws from handle assembly. Took one terminal at a time from the old switch and put it in the same place on the new switch. Put housing back together. I then pulled the defective lever out of the spool holder, then pressed the new one back in.
Both items installed without any problems and the trimmer worked as good as new - saving me the expense of replacing it with a new trimmer.
Much appreciation and thanks!!
Downloaded the parts diagram for the trimmer....on the internet
Removed screws from handle assembly. Took one terminal at a time from the old switch and put it in the same place on the new switch. Put housing back together. I then pulled the defective lever out of the spool holder, then pressed the new one back in.
Both items installed without any problems and the trimmer worked as good as new - saving me the expense of replacing it with a new trimmer.
Much appreciation and thanks!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Grass Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
Line wouldn't feed out
Pull old lever out and insert new lever.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers
Trimmer line would not feed, also the cap was cracked and loose
1. Push in tabs to remove cover/end cap
2. Remove old spring off of cover/end cap, then install onto new one.
3. Set cap assembly aside
4. Remove line spool assembly to uncover spool lever
5. With pliers, pull spool lever straight out, discard
6. New spool lever snaps into place by hand
7. Reverse order to reinstall
2. Remove old spring off of cover/end cap, then install onto new one.
3. Set cap assembly aside
4. Remove line spool assembly to uncover spool lever
5. With pliers, pull spool lever straight out, discard
6. New spool lever snaps into place by hand
7. Reverse order to reinstall
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The part broke and did not allow string to come out
Took spool off weed eater. Removed twine from spool and there is a hole where the part snaps in. Very easy to remove if the part is still attached. A screwdriver will snap it right up and you install the new one in same direction. This part regulates how much twine comes out of the trimmer. This type of trimmer does not need bumping to have the twine come out. When the twine does not come out, I discovered that the little part moves back and forth allowing the string to move. This part is in the casement where the spool comes out to restring the twine.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Grass Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Friction in the assembly melts the plastic parts.
Disassembled the old case.
Removed the spindle and case.
Replaced the unit and was good to go.
Removed the spindle and case.
Replaced the unit and was good to go.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
Missing & worn parts
Remove the cover by pressing on the side tabs and pulling it out. Then remove the spool. Inside the upper housing you will see the lever, take some pliers and pull it out and then just press the new one on. Install the spool in the housing and let some line out. Then place the missing spring on top of the cover and line up the tabs to the holes in the upper housing and press it in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grass Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, fingers
Lever was worn out.
Removed the string cover, removed and replaced to lever. Trimmer works like when it was new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, None
Lost trigger
Replaced trigger put it back together then cut my grass finally.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grass Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, no tools needed
the lever was missing from the string head
took the cover off pushed new lever into place, put line spool in and replaced cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
21 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
17
4 stars
3
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
- 2
- 3
Great service
Had my part and shipped right away. Great service. Have used them several times before.
Guest -
May 19, 2023
Verified Purchase
It was the right part! Thank you!
Thank you!
Orlando -
October 10, 2022
Verified Purchase
Just what I required.
The little lever fitted exactly and works properly. Thank You.
iGlobal -
August 1, 2022
Verified Purchase
Black & Decker Weed whacked lever
I LOVE your company. I’ve thought repeatedly that I’d need to replace this power tool, but YOU’VE come through every time with the parts I needed!! Thank You!!
Guest -
October 3, 2021
Verified Purchase
Easy Repair
I let my father borrow my weed eater. When I got it back I realized he had lost the lever. When I used the weed eater the holding mechanism was not holding the string because it was missing the lever. I ordered the lever and in 1 week I was using my weed eater again :)
Guest -
August 14, 2021
Verified Purchase
Just what I ordered
Came in when supposed to and works just as it should
BRANDY -
June 7, 2021
Verified Purchase
Looked for ever to find these levers, they had them, easy catalog to search.
Just exactly what came out of old unit, fit perfectly.
Guest -
June 3, 2021
Verified Purchase
Easy repair
Parts came, installed, easy Peasy
Steve -
May 28, 2020
Verified Purchase
Great service
Fast shipping, lever works great and at a good price. This worked out better than buying a new lawn trimmer.
Guest -
September 13, 2019
Verified Purchase
Order of missing part
Prompt service! Correct part, trimmer working again Part # 598437=00
Guest -
August 19, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
- 3
Product Information
