Easy
15-30 minutes
This genuine manufacturer approved replacement infra red burner is made for use with Napoleon gas grills. It has ceramic honeycomb tiles with tiny openings that produce flames to heat ceramic to a glowing red. Emitting direct energy in the infrared spectrum. This burner assembly is made out of stainless steel with ceramic honeycomb burner tiles.
This repair does not require any tools.
• Disconnect gas tank
• Remove old burner and secure new one
• Re-connect gas and test the burner
Infra Red Main Burner S81007
OEM part for: Napoleon
Part Number: S81007
$216.72
In Stock
Order within the next 10 hours and your part ships today! 
Product Description ?
- Classification: Part
- Weight: 3.56 lbs.
- Shipping: Ships Worldwide
Compatibility
This part will fit the following 3 machines
Napoleon
M605RSBI Mirage Stainless Steel Gas Grill View Diagrams & Manuals
M730RSBI Mirage Gas Grill View Diagrams & Manuals
BIM605RBI Built-In Gas Grill Head View Diagrams & Manuals
This item works with the following types of products:
This part replaces obsolete part #: N010-0499
Repair Videos ?
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
just what we needed!
The part was in pristine condition and arrived quickly. Installation made a 16 year old barbecue work as if new for a fraction of the price of new.
Guest -
August 19, 2021
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Infra Red Main Burner
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Infra red burner broke
Joseph - June 23, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Nutdriver
Parts Used
Remove old part, replace with new part
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Infra red had burned out. Electronic ignition failed
Richard - May 10, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Replaced electronic ignition. Was a simple replacement. The infra red was also easy once I got the old unit out.
Fired it up. Worked great.
Fired it up. Worked great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
One of the ceramic infrared burners had cracked and would not light.
Daniel - December 18, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
1. Removed the stainless steel grill grates to access the IR burner
2. Removed the IR burner retaining screw and removed the faulty burner
3. Placed new IR burner and secured with retaining screw
4. Replaced stainless steel grill grates and fired up the new burner
2. Removed the IR burner retaining screw and removed the faulty burner
3. Placed new IR burner and secured with retaining screw
4. Replaced stainless steel grill grates and fired up the new burner
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Parts were worn and needed replacing
Lagrone - October 9, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Nutdriver, Vacuum, wire brush
Replaced all worn parts and cleaned interior. Parts fit perfectly. Very satisfied
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Infra red not working(ceramic broke)
Jay - January 29, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set
Took both inferred out and installed new one and new handle. very easy
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The infra red main burner was broken
Arnon - October 12, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Adjustable Wrench
Parts Used
Remove the old part and install the new one. Easy!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Ceramic bricks in old burner were cracked and therefore burner would not light
Kellye - September 25, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Nutdriver
Parts Used
Removed 1 screw holding the old burner. Burner simply slides off the burner valve. Slide in the new burner making sure it seats properly over burner valve and install the screw. Very simple and straightforward.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Burner broken
David - August 1, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Nutdriver
Parts Used
Replaced using 1/4 in nutdriver. Verify starter spark operational.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Installation of new manifold and burners due to wear.
Al - May 10, 2016
Tool Type
Outdoor Grill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wrench Set, Nutdriver, Adjustable Wrench
I first disconnected the supply flex line/ hose from tank to the manifold and took old burners out. Removed control knobs and bezels behind all knobs. This, in turn, freed the manifold from the control panel. Removed control panel containing manifold. Install new manifold.
Issues; phillips head screws are possibly stainless steel and the interface of the screwdriver with screw head can be galled/ damaged.
Solution; get the screws off with vice grips. There are like screws (grade 8) on the old manifold. These screws will match threads.
Issue; new manifold was slightly bent, this was discovered during installation. The box was damaged, so it can be surmised that it was bent in shipping
Solution; gently, but forcefully apply screws attaching manifold to the back of the control panel starting at one end working across minimizing stress to the manifold tube.
Issues; phillips head screws are possibly stainless steel and the interface of the screwdriver with screw head can be galled/ damaged.
Solution; get the screws off with vice grips. There are like screws (grade 8) on the old manifold. These screws will match threads.
Issue; new manifold was slightly bent, this was discovered during installation. The box was damaged, so it can be surmised that it was bent in shipping
Solution; gently, but forcefully apply screws attaching manifold to the back of the control panel starting at one end working across minimizing stress to the manifold tube.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
