Hook And Loop Rubber Backing P 1600A01CU1
Part Number: 1600A01CU1
Order within the next 9 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 2609100541.
Product Information
Description:
| Genuine Bosch replacement part. Includes one Pad. This Pad is used to hold 5 inch Hook and Loop sandpaper with 8 vacuum holes. Over the past few years the popularity of Hook and Loop paper has grown because of the ease of changing sandpaper when needed. Over that of the PSA (Pressure Sensitive Sandpaper) Applying too much pressure on the sander may cause premature wear on the Hook and Loop pad. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Sander
Questions & Answers for Hook And Loop Rubber Backing P
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
6 of 6 people found this instruction helpful
Tool Type:
Sander
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The pad was coming apart
Removed the screws, took off the old pad and put on the new pad and replaced the screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen key
Velcro on sander no longer "stick", pads would just fly off
0.) Using the model number I found the correct replacement part. Website helped to find model number. I had already bought one that "looked the same" somewhere else, it did not fit.
1.) Using an allen key I removed the four screws holding the velcro pad to the sander.
2.) Put the new pad in place and screw in using allen key with existing screws.
3.) Allen key was a small standard size, I used a hex key multi tool. Worked great.
4.) Added sandpaper and continued to abuse my sander.
1.) Using an allen key I removed the four screws holding the velcro pad to the sander.
2.) Put the new pad in place and screw in using allen key with existing screws.
3.) Allen key was a small standard size, I used a hex key multi tool. Worked great.
4.) Added sandpaper and continued to abuse my sander.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, none
The pad on my sander lost its oscillating.
Removed the old pad .
Installed the new pad.
Installed the new pad.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Sander
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Worn
Replaced the old pad with the new one. Works great!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, air nozzle
Sander backer wouldn't hold paper.
Remove 4 screws holding the Rubber Backing pad and remove Pad. Use air nozzle to clean old sawdust build up. Install new pad.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The old rubber backing pad would no longer hold the sand paper to the sander.
Removed four screws and the old pad was removed, installed new pad and tightened screws. Works like brand new now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Sander Pad worn & would not hold sanding disks
Very quick & easy repair. Remove the 4 screws holding the worn pad on. Then install the new pad with the 4 screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Rubber backing pad worn, discs would not stay on
Just remove the 4 screws attaching the pad to the sander, then screw on the new pad.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The pads wear out and have to be replaced.
Unscrew 4 screws, replace pad, screw 4 screws back in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, None
Worn out backing pad
Removed old pad and installed new pad.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
28 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
25
4 stars
2
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
- 2
- 3
Exactly what I needed, easy to use website and fast delivery. What else do you need?
Arrived quickly, exactly what I needed.
Guest -
November 20, 2023
Verified Purchase
Just the thing
Arrived quickly and was reasonably priced
Guest -
June 27, 2023
Verified Purchase
Simple
it was as expected
Guest -
April 17, 2023
Verified Purchase
Easy job
Replaced trashed hook & loop pad . Got a replacement, they came quick as usual. Easy fix
Paul -
March 14, 2023
Verified Purchase
Sander part
My part shipped quickly and got me running again.
Guest -
January 3, 2023
Verified Purchase
Good purchase
My sander had a lot of use since I retired and it was not holding the sanding disks in place. I figured I was just going to have to replace it even though the motor is still strong. Then I thought about replacing just the pad. This was easy and it is almost better than new.
Guest -
May 19, 2022
Verified Purchase
fit like a charm
arrived quickly
Guest -
April 3, 2022
Verified Purchase
Oem
This (as all products) was a direct replacement and fit ..... I have complete confidence when ordering from this company and if something is shipped wrong on their end ....they ship the right part almost immediately ...I will continue to buy from them for tool issues....thanks guys👍
Guest -
March 2, 2022
Verified Purchase
Exact replacement
My parts arrived quickly and were an exact replacement for what I needed. Replacement is a fantastic site for all kinds of replacement parts. I highly recommend them.
Richard -
December 22, 2021
Verified Purchase
Worked perfect
Worked perfect
Guest -
November 13, 2021
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
- 3
Product Information
