Holding Plate 1611016003

Part Number: 1611016003

Order within the next 14 hours
and your part ships today!

Questions & Answers

Repair Instructions

Product Information

Description:

The holding plate is also known as a fork spring, or a spring fork. It is used to hold the wobble plate in place on your hammer drill. A screwdriver can be used to pry the old one off, and to put the new one in place. If your plate has become damaged, it should be replaced to ensure that the other components of your power tool are properly secured. This is a genuine OEM part which guarantees it will fit your power tool.

Warning: California's Proposition 65

Compatibility

This part is compatible with the following machines:

Bosch

11218EVS (0611218739) Hammer Drill
11218EVS (0611218739) Hammer Drill
11221DVS (0611221639) Rotary Hammer
11222EVS (0611222739) Rotary Hammer
11222EVSG (0611222783) Rotary Hammer
11224VSR (0611224739) Hammer Drill
11224VSR (0611224739) Hammer Drill
11226 VS (0611226539) Hammer Drill
11226 VS (0611226539) Hammer Drill
GBH2SE (0611226639) Hammer Drill
GBH2SE (0611226639) Hammer Drill
GBH2SR (0611226739) Hammer Drill
GBH2SR (0611226739) Hammer Drill
GBH2SR (0611226839) Hammer Drill
GBH2SR (0611226839) Hammer Drill
11228VS (0611228639) Hammer Drill
11228VS (0611228639) Hammer Drill
11228VSR (0611228739) Hammer Drill
11228VSR (0611228739) Hammer Drill
11236VS (0611236739) Rotary Hammer
11253VSR (0611253739) 1" SDS-plus Bulldog Xtreme Rotary Hammer
11255VSR (0611255539) 1" SDS-plus Bulldog Xtreme Rotary Hammer
11536VSR (3611J00R10) 36V 1" SDS-Plus Rotary Hammer
11224VSRC (0611259310) Rotary Hammer
11226 (0611226039) Rotary Hammer
11255VSR (0611255739) Rotary Hammer
GBH2-24DS (0611218034) Rotary Hammer
GBH2-24DS (0611218039) Rotary Hammer
GBH2-24DS (0611228039) Rotary Hammer
GBH2-24DSR (0611218534) Rotary Hammer

Expand the 60 compatible machines

Products Compatibility

This item works with the following types of products:

• Drill
• Hammer Drill
• Rotary Hammer

Questions & Answers for Holding Plate

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

Tool Type:

Rotary Hammer

Parts Used:

Holding Plate - 1611016003

O-ring - 1610210106

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Two more little screwdrivers to hold the brushes

The holding plate bent and came off also broke the "o" ring

First removed the rubber, the part where you insert the bits then remove the snap ring, the ball bearing next, then spring, then the hole assembly comes out that's where you replace the "o" ring, then the holding plate but make sure you put grease on all moving parts, then you start putting everything back together the same way you took it apart. That's how I did it, very easy!!!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Product Information