Easy
15-30 minutes
This is a genuine Char-Broil replacement part, and is sold individually.
The purpose of the Heat Tent is to keep particles of food and debris from getting into the burners.
They will also flavor the food you are grilling, because of the drippings falling on them and creating smoke. The Heat Tents should be cleaned after grilling a few times, soap and water and a good scrub brush should do the job. Part is compatible with the grills listed below.
Heat Tent G560-0006-W1
OEM part for: Char-Broil
Part Number: G560-0006-W1
$13.69
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.70 lbs.
- Also Known As: Heat Plate, Flame Tamer, Heat Shield
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 3 machines
Char-Broil
463211511 4-Burner Grill With Side Burner View Diagrams & Manuals
463210311 4-Burner Gas Grill With Side Burner View Diagrams & Manuals
466211513 Classic Grill View Diagrams & Manuals
This item works with the following types of products:
Repair Videos ?
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
rebuilt grill
perfect fit parts, Susan was VERY helpfull, and very
professional!
Guest -
March 29, 2021
Verified Purchase
Straightforward replacement
This part seems to be as good as the original, and should last as long.
Guest -
October 28, 2020
Verified Purchase
Nice Part
Fits perfectly
Guest -
June 25, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Heat Tent
What is the length and width of this part?
Jim
asked on 2023-03-10
Hello Jim, Thank you for writing. This Heat Tent is 16 9/16? X 4?. Thank you for the inquiry, good luck with the repair!
eReplacementParts Team March 10, 2023
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Parts had rusted out
Brenda - February 17, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed the screws from the old carry over tubes, and replaced them with the screws supplied with the new tubes. Removed the cooking grates and replace the heat tents. Then simply replace the warming grid. Simple.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Change heat tents
micheal - December 17, 2015
👍 1 of 1 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Nothing
Parts Used
Take old ones out and install new ones. Too easy
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old tents were rusted and corroding
kevin - November 24, 2015
👍 1 of 1 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Gloves
Parts Used
I simply pulled off the old ones, threw them away, then placed the new ones in place. Afterwards, I ran the grill at high heat for 15 minutes then shut it off.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Heat tent and carry over tubes rusted out
Wayne - August 19, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
1. Removed old heat tents, just lifted off
2. Used pliers to pull out screw washer rusted in place on carry over tube
3. Put new carry over tubes in place, tightened screws
4. Put new heat tents on
5. Project completed
6. Turned on gas and lit grill
7. All worked perfectly.
2. Used pliers to pull out screw washer rusted in place on carry over tube
3. Put new carry over tubes in place, tightened screws
4. Put new heat tents on
5. Project completed
6. Turned on gas and lit grill
7. All worked perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Whole burner assembly was rusted starter tube broke in half.
Donald - June 5, 2018
Tool Type
Outdoor Grill
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Power Drill, Wrench Set
Because of age of grill I removed the front panel to pull back the gas nozzles. This part was unnecessary but did allow easier install of tubes. I did have to drill out two of the mounting screws as they were rusted in place and would not break free even an impact driver and wrench could not break it free. After preparing the install it went smoothly and works better than new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Heat tents and carryover tubes were rusted and grill did not heat well.
Mike - May 18, 2018
Tool Type
Outdoor Grill
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
1. I removed all of the parts
2. Cleaned the grill
3. Blew out the gas tubes, wire brushed them and re-inserted them
4, Put in the new carryover tube and tents
2. Cleaned the grill
3. Blew out the gas tubes, wire brushed them and re-inserted them
4, Put in the new carryover tube and tents
Did you find this story helpful?
Thanks for voting and helping fellow customers!
My gas grill needed new heat tents
George - May 17, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
Removed the old rusted ones, then installed the new ones.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Heat tent and crossovers rusted out.
Frank - May 14, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Vacuum cleaner.
Removed grill top.
Removed old heat tents and crossovers - recycled them.
Installed new crossovers and then heat tents.
Also cleaned and vacuumed inside of grill.
Removed old heat tents and crossovers - recycled them.
Installed new crossovers and then heat tents.
Also cleaned and vacuumed inside of grill.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Original heat tents had rusted
Thomas - May 4, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
1.Removed the cooking grates.
2.Removed and discarded the rusted heat tents, no tools required.
3.Put in the new heat tents by hand, no tools required.
2.Removed and discarded the rusted heat tents, no tools required.
3.Put in the new heat tents by hand, no tools required.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rusted old parts.
Patrick - March 27, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, No tools required
Removed old dilapidated parts and replaced with new parts. Grill looks New again. Good for a few more years.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
