Accessories for the Hamilton Beach 70550R
Questions & Answers
My big mouth processor will not come on. What can I do to repair it?
Rosie for model number 70573H asked on 2019-07-31
Hi Rosie , 1) make sure The food processor is switched to ON and plugged in 2) Check to see that the bowl and lid are locked in place by setting the bowl into the preset slots with the handle facing the right side of the processor. Then rotate the bowl clockwise until locked. If not the processor will not run. 3)If processor is plugged into a working outlet and bowl is locked into place but the unit is still not working, then the power cord may need to be replaced. 4)If the above does NOT apply and the processor is still not working, then the motor may be damaged. Thank you for your question and good luck with your repair!
I have the shredder/slicing disc but would like the option of a thicker slice. Are there any other slicer discs available for that appliance?
Michael for model number 70550 asked on 2019-08-31
Hi Micheal, sadly I could not another disc other than 990005900. Thank you for your question and good luck with your repair!
The top (square section) of the motor shaft spins on the shaft. Therefore, the shredder disk stops spinning even though the shaft spins. How may I get this problem fixed?
Scott for model number 70550r asked on 2019-09-17
Hello Scott, Thank you for your question. The square piece you are referring to is attached to the shredder disc, if the piece cannot be tightened, you would need to replace the whole thing under part 990005900 for your model. Hope this helps!
I need to order the small gear on the end of motor shaft as old one is stripped, so will no longer drive the rubber drive belt. Thank you in advance for your cooperation!!!! Steve.....
Steve for model number 70550R asked on 2019-09-21
Hello Steve thank you for writing . This part has been discontinued and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute.We do carry a lot of spare parts for units similar to yours for example part Number : 970506200. Good Luck with your repair
I cannot get the bowl to release for cleaning. Dies it come off
Nancy for model number 70550r asked on 2019-10-05
Hello Nancy and thank you for writing. Yes, it comes off, you have to turn it to the left to release. We hope this helps. Please contact us anytime.
I'm looking for an S Blade for this food processor. Would a blade from a different model work?
Jim for model number Hamilton Beach 702R asked on 2019-10-14
Hello Jim and thanks for writing. It might work but we would need the following, please. According to our database, the model number you provided is just a portion of a model number with multiple possible variations. To ensure that we recommend parts that will work for your model, please check your information again; you will need to provide us with the full model and serial numbers located on the sticker on the unit itself. Once we have that information, we would be happy to find the part you need.
I am looking for a tool to push the food inside the chute. Dont know the part name n number.
Suman for model number Hamilton beach prep star 70550R asked on 2019-11-16
Hello Suman and thanks for writing. It is called a pusher.The part you are looking for has been discontinued for your model and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. We do carry other spare parts for units such as yours, for example, Part Number: 990002500 Good Luck with your repair.