Medium
30-60 minutes
This is an authentic DeWALT replacement part. The gearcase assembly is designed by the manufacturer for use in jig saws. This part is made of metal, and is used to house the main gear assembly and connect it to the armature. Please note that this part has been slightly re-designed from the original. The pin that supports the main gear has been modified by removing the washer groove and retaining clip. The new and old design parts are still interchangeable with some slight adjustments. The new design without the groove can be used to repair older products, and the clip and washer can then be discarded. The old design part can also be used as a replacement for the new design, but the clip and washer must be used to prevent possible damage to the gear caused by the sharp groove edge. You may require a screwdriver or Allen wrench when replacing this part. This item is sold individually.
Gearcase Assembly 589011-00
OEM part for: DeWALT
Part Number: 589011-00
Leaves our warehouse within 7 - 12 business days
Compatibility
This part will fit the following 10 machines
DeWALT
This item works with the following types of products:
- Jig saw Parts
- Saw Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gearcase Assembly
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Dewalt DW331 type 11 Jigsaw fell off bench and broke gearcase flange for the for the sole plate.
Tool Type
Jig saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, torque bits, hacksaw
Parts Used
Disassembled jigsaw to remove the gearcase and parts within the gearcase.
Transferred grease from old gearcase to new gearcase being careful not to contaminate it.
Had to hacksaw the old gearcase on both sides of the armature bearing to be able to remove it from the old gearcase. Did not want to damage the bearing by hitting on it. I believe I used socket tools to press or tap the bearing into the new gearcase. (it's been a while since I did this.)
Made sure the armature turned freely when installed.
Reassembled the jigsaw following instructions to discard the clip and washer on a shaft in the gearcase. Note that the brushes fell out on disassembly. Reinstalled the brushes after the armature was installed.
Disassembled the jig saw - forgot to move the clip on the flange to the new gear case. Did that and reassembled the jigsaw again.
Jigsaw works great.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
