eReplacementParts.com
866-322-9842
Weber Parts
Repair Parts Home  Grill Parts  Weber Parts  70375 Flavorizer Bars

Flavorizer Bars

Part Number: 70375
Weber
Availability: 25+ in stock
Price: $39.46
Quantity:
Order within the next 8 hours
and your part ships today!
Product Information
Manufacturer: Weber
Product Number: 70375
Classification: Part
Weight: 4.93 lbs.
Shipping: Ships Worldwide
Description:
This is an Original Weber replacement parts used for some of their Grills. This set contains 4 Flavorizer Bars. The purpose of bars is to direct grease and drippings away from the burner tubes, which cuts down on flare ups tremendously. An extra benefit of Flavorizer Bars is that they help add that “cooked on a grill” flavor to your food. Bars rust is the combination of heat and moisture and should be replaced of they are damaged our have holes.
Questions & Answers

Will these flavorizer bars fit my frill?
John for model number WEber Summit E-470
Hello John, Thank you for contacting us. Please resubmit your question on the site with the model number of your equipment rather than the series so that we can find the parts and information for you. Thank you.
What are the dimensions of the flavor bars?
john specce for model number AA 0995042
Hello John, thank you for your inquiry! We found the dimensions of this part to be 18 1/8 x 1 3/4. I hope this information helps!
Looking for flavorizing bars. Are these available? Also new burners BBQ is 10 years old.
Ira for model number Weber genesis S320
Hello Ira, thank you for writing. We will need the model number for your grill to look into the right replacements. S320 is a series number.
Favorize bars are 23 inches long. and I need five bars. Do you know the part number. There is no model number on the unit.
Farley
Hi Farley, we cannot find parts based on part dimensions as even parts that are the same size can have small differences that make them incompatible with your model. However if you could supply your model number we would be happy to research the correct parts for you. Usually on a grill the model is on the body on a sticker and may be in an awkward to access location. Thank you for your question and good luck with your repair!
Repair Instructions: Submitted by Customers Like You
4 of 5 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Flavorizer Bars - 70375
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Rusted
Replaced old bars with the new one, easy, no tools needed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Flavorizer Bars - 70375
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Needed new flavorizer bars.
Removed the grates from the grill and cleaned them
Removed the old flavorizer bars and installed the new ones
Installed the grill grates
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Flavorizer Bars - 70375
Rod Style Grate, S.S. - 70372
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No Tools Needed
Update grill and flavorer bars
1.Remove old parts
2. Brush and clean grill
3. Install flavorizer bars
4. Install new grill grates
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Flavorizer Bars - 70375
Main Burner Tube - 70306
Flavorizer Bar Brackets - 64850
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Wrench Set
Flavorizer bar and bracket was heavily rusted. Burner tubes worked but weren't performing well due to rust.
Disconnect propane from grill and open all control valves
Removed grill grates and flavorizer bars.
Removed control knobs
Removed two screws to remove control knob panel to access manifold
Removed two screws securing manifold and moved manifold to access burner tubes.
Slid burner tubes out
Removed two screws securing the front and back flavorizer bar brackets and removed brackets
Replaced with new brackets and screws (included)
Inserted new burner tubes
Screw in manifold using old screws
Reconnect propane
Test all burners
Reinstall control knob panel using old screws
Install all control knobs
Install new flavorizer bars
Install existing grill grate
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Flavorizer Bars - 70375
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, no tools required
Old flavorizer bars were corroded.
Simply removed the two cast iron grills and set aside, then lifted the flavorizer bars with my hand (no tools!) and dropped in the new ones.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Manufacturer: Weber
Product Number: 70375
Classification: Part
Weight: 4.93 lbs.
Shipping: Ships Worldwide
Repair Guides
Articles:
How to Replace the Ignitor Button on a Char-Broil Tru-Infrared Gas Grill
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
Related Products
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy