Genuine Karcher replacement part, this item is sold individually. The purpose of the 9.181-005.0 Filter Seal Hose Connector is to act as a seal to keep water from leaking out of the hose connection. It also will keep debris from entering the pump and causing it to fail.
Removed old assembly. Placed new o-ring on the male adapter, inserted in hose connector, and screwed into pressure washer. Then inserted filter seal hose connector.
The illustrated parts breakdown was critical to identifying the proper parts.
Did you find this story helpful?
Thank you for voting!
Plastic threads wore out and no longer stayed in housing
Removed fitting with channel locks; replaced new fitting by hand (hand tight)
Use large bladed screwdriver to poke filter screen\'s rubber perimeter washer to seat it in place.
The plastic fine threads on the adapter pulled out and it was leaking there. Also the attached seal to the inlet screen also leaked. Removed worn parts and reinstalled male adapter, used a wide tip screwdriver that I inserted into adapter to screw it into pressure washer. Then pressed in screen filter and gasket. Worked fine, no leak at h
... Read moreose inlet into pressure washer.
Read less
Did you find this story helpful?
Thank you for voting!
The hose inlet fitting to the pressure washer was broken
Removed piece of inlet fitting from pump assembly
Assembled fitting with o ring and female connector
Tightened fitting into pump housing
Added hose washer and screen
Easy repair, the old broken adapter part had already been removed.
Just replaced the broken part and also replaced the adjacent part at the same time.
A very inexpensive repair.
Removed old part and threaded in new part with allen wrench. It is too bad a brass threaded adapter wasn\'t available. Use caution when rolling pressure washer around and hold inlet hose so it won\'t pull out plastic adapter again.
Removed old water connectors, and installed the new ones.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Pressure Washer","title":"Pressure Washer","url":"/parts/power-tool/pressure-washer/"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/power-tool/pressure-washer/seals-and-gaskets/"},{"position":3,"name":"9.181-005.0","title":"9.181-005.0","url":""}]
_WW_4.gif "Part Location Diagram of 9.181-005.0 Karcher Filter Seal-hose Connector-")
_WW_4.gif "Part Location Diagram of 9.181-005.0 Karcher Filter Seal-hose Connector-")
