This replacement part is supplied directly from original equipment manufacturer for use with walk behind/push mowers. The drive control cable is the cable that stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. This cable assembly consists of a metal wire cable with z-type bent ends, rubberized cover/body and a plastic clip. Replacing this cable is a simple task that may require pliers. • First you want to see where the old cable is attached • Just remove one cable end there and install the new one • Now you can run the new cable up to the control handle • Then just as the old cable, put the z-shaped end through the hole in the control handle • Once both ends are attached, push the upper mount assembly of the old cable out of the hole in the upper handle • Tie the cable in place just as the old one was (make sure to leave enough clearance and free play to avoid over-bending and breaking the new cable)
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy Change out
The new cable replaced one that had worn and actually stretched just a little bit. The new cable installed easily and quickly. If you do this, it helps if you can release some of the tension on the old cable before removing it. I did this on my mower by folding the large handle, which was able to be folded over for compact storage.
Guest - June 5, 2019
Verified Purchase
★★★★★
★★★★★
mower cable
Easy repair ,cable worked perfect
Guest - May 28, 2019
Verified Purchase
★★★★★
★★★★★
Easy install
Got the replacement part fast and install was a breeze!
Guest - June 6, 2019
Verified Purchase
★★★★★
★★★★★
perfect fit
it was an easy install on both cables. Exact fit.
Guest - July 2, 2019
Verified Purchase
★★★★★
★★★★★
Perfect Fit
Thank you for the replacement part. it was a Perfect fit and changed out easier than others I have tried as for being aftermarket.
Guest - July 18, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair
Cable fit perfectly. Exactly the part I needed.
Guest - July 19, 2019
Verified Purchase
★★★★★
★★★★★
Super Fast Shipping
The correct, OEM quality part arrived before I expected. Thank you.
Guest - August 24, 2019
Verified Purchase
★★★★★
★★★★★
CABLE
GOOD PRODUCT, FAST SHIPPING
Guest - September 10, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair
I tried to order parts three another site and kept getting wrong parts. This is the best place. Good price and right parts shipped.
Guest - September 21, 2019
Verified Purchase
★★★★★
★★★★★
Perfect
Fit great and recommend!!!!
Guest - April 13, 2020
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Very easy repair take bolt off front shroud pinch connecter, remove broken cable install new cable route it through the cable holder and attach it to the handle bail. No tension adjustment required. Reinstall the drive belt shroud.
Replaced entire sheath and cable. However the cable for the engine control was also corroded, hadn\'t broke yet, but bought 1/16 inch cable, some nicopress sleeves, and swaged a new piece of cable onto the ends, then ran the new cable into that sheath and repair on that part only cost me another 15 minutes plus $4 for materials. Works
... Read morefine
1. Used socket wrench to open panel that conceals bottom of cable.
2. Removed the cable. I needed pliers to finagle the old cable out.
3. Put in the new cable.
4. Reset the panel that covers the drive control cable.
Did you find this story helpful?
Thank you for voting!
Front wheel drive cable snapped and would not operate the front wheels.
Removed old cable assembly
Removed old cable lower attachment bracket from old cable
Installed lower attachment bracket to new cable since new cable had wrong lower bracket. Filed old bracket off
Installed New cable.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(96142006701)_WW_1.gif "Part Location Diagram of 532194653 Husqvarna Drive Control Cable")
(96142006701)_WW_1.gif "Part Location Diagram of 532194653 Husqvarna Drive Control Cable")
