eReplacementParts.com
877-346-4814
Cuisinart Food Processor Parts
Repair Parts Home  Appliance Parts  Cuisinart Parts  Cuisinart Food Processor Parts  Cuisinart DLC-7 Food Processor Parts


We Sell Only Genuine Cuisinart ® Parts.

 Cuisinart DLC-7 Food Processor Parts




Accessories
Accessories for the Cuisinart DLC-7

Questions & Answers

Where can I buy a replacement bowl for a DLC7-Pro cuisinart food processor?
J. Kirwin for model number DLC7-PRO
Hello J. Kirwin, thank you for inquiring. The replacement Work Bowl With Handle for your model is part DLC-005AGTXT. To place an order, please feel free to contact customer service by phone or you may do so online. Thank you.
I need the pusher assembly. Do you have that available?
Lynn Sandlin for model number DLC-7E
Hello Lynn, thank you for writing. Unfortunately it is no longer available for this model you are commenting on, DLC-7. However for your model, DLC-7E, it is part DLC-018BGTXT1.
I am looking for a replacement bowl & lid for a DLC-7 super pro cuisinart food processor. Can you help?
Sharon May for model number DLC-7 super pro
Hello Sharon, thank you for your question. You will need to purchase the DLC-7 4-Piece Tritan Bowl Kit. The current DLC-7 Tritan workbowl is not compatible with any previous generation of workbowl cover or sleeve. This kit is compatible with any DLC-7 machine base and all DLC-7 blades, discs, and accessories. I hope this helps!
Cuisinart work bowl
Jan for model number dlc-7
Hello Jan, Thank you for the question. I looked up the part and it is listed as No Longer Available/Discontinued. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
The lid is broken is this available
Joanne for model number DLC 7
Hello Joanne, thank you for your inquiry! The cover for model DLC-7 is part number DLC-016GTX-1. I hope this information helps!
The part I am inquiring about is a small round plastic piece that fits in the bottom of the bowl. Have used my machine for years with great success and love it.....this "piece" was accidently ground with dough mixture - NOT BY ME.....all still works but w/o it, the sides are getting scraped . Is this piece (gasket-round piece-sleeve) available...please advise thank you
bernice for model number DLC-7
Hello Bernice, thank you for your inquiry! The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
need two of these work bowls
karen for model number DLC-7E
Hello Karen, thank you for inquiring. The replacement for model DLC-7E is part number DLC-005AGTXT. Good luck with your repair!
I need a workbowl replacement for my cuisinart DLC-7FPC.
Andrea for model number DLC-7FPC
Hello Andrea, Thank you for your question. The replacement work bowl for your model is part #DLC-005AGTXT. Hope this helps!
Part DLC -10. Stainless steel blade is it available for ordering?
Susi Laabs for model number DLC 10?
Hello Susi, thank you for your question. Unfortunately, the stainless blade isn't listed as an available part for this unit.
Can I get a replacement power unit for this model? If so how much$?
Marsha for model number DLC7
Hello Marsha, Thank you for writing. Sadly, the part you are requesting we do not have listed. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. Hope this helps!
I am looking for a replacement work bowl.
Sue for model number DLC-7E
Hello Sue, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: DLC-005AGTXT. Hope this helps!
can I still get a new bowl and lid for this model?
Doug
Hello Doug thanks for writing. Lid # Part Number: DLC-016GTX-1 Bowl NLA Please contact the manufacturer directly for assistance .Feel free to contact us back if the manufacturer provides you with a replacement part number so we can find the part for you. Hope this helps.
I need a replacement work bowl.
Steve for model number DLC 7E
Hello Steve, thank you for inquiring. The replacement Work Bowl for model DLC7E is part DLC-005AGTXT.
Is there a replacement bowl/top (blades are all fine) available for the DLC7 Super Pro? How much does it cost?? Thanks in advance!
Mary for model number DLC7 Super Pro
Hello Mary and thank you for writing Lid -Part # DLC-016GTX-1 is in the list of compatible items for your model. Hope this helps The bowl is NLA Please contact the manufacturer directly for assistance .Feel free to contact us back if the manufacturer provides you with a replacement part number so we can find the part for you. Hope this helps.
I just ordered and received the 3 disk set standard for 11 & 7 models, part #DLC-873. These disks need a stem to connect them with the motor. I saw what I need on your web site and cannot find it now. Please help, thanks William.
WILLIAM ADAMS for model number DLC-7
Hi William, for model DLC-7 the compatible stem is part DLC-039ATX-1. Thank you for your question and good luck with your repair!
DLC-7 super pro/large pusher and sleeve assembly part
Marilyn for model number A1003701
Hello Marilyn, thank you for inquiring. The replacement for your model is Large Pusher & Sleeve Assembly part number DLC-018BGTXT1. Please see the related parts below. Good luck with your repair!
Is the work bowl cover for the DLC7 food processor available and what is the cost?
Rita for model number DLC7 food processor work bowl cover
Hello Rita and thank you for writing yes Part # DLC-016GTX-1 is in the list of compatible items for your model. Hope this helps If you would like to place an order with our company or inquire about pricing , availability and shipping , you will have to contact our customer service. You can do so one of two ways: online: www.ereplacementparts.com or telephone: 877 346 4814. Thank you.
I am looking for the stem that attaches to the shredder blade and other blade. Is it possible to get one.
Anne for model number DLC-7P
Hello Anne, Thank you for your question. The correct stem that fits your model is under part DLC-039ATX-1. Hope this helps!
How do I unjam the blade DLC7? It won't turn or come off the shaft. Remove the Work Bowl Cover and unlock the Work Bowl from the base so that it spins freely. Gently pull up on the Work Bowl while rotating it around he motor shaft. This will place pressure on the bottom of the blade, and occasionally will dislodge the blade from the shaft. If you are able to remove the blade, inspect the motor shaft and the inside of the multipurpose blade for damage, as malformation of either piece will increase the likelihood of recurrence.
Karen for model number DLC7
Hello Karen and thanks for writing. Remove the Work Bowl Cover and unlock the Work Bowl from the base so that it spins freely. Gently pull up on the Work Bowl while rotating it around he motor shaft. This will place pressure on the bottom of the blade, and occasionally will dislodge the blade from the shaft. If you are able to remove the blade, inspect the motor shaft and the inside of the multipurpose blade for damage, as malformation of either piece will increase the likelihood of recurrence. We do carry other spare parts for your unit such as Part # DLC-873 disc set .Good Luck with your repair
Is a replacement metal blade available? Thank you
Eileen for model number DLC-7. Super pro
Hello Eileen and thanks for writing. The part you are requesting is discontinued and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. Disc set Part Number: 242J5201 is in the list of compatible items for your model. Hope this helps . Please contact us anytime.
I need the pusher assembly for this model, including the removable small pusher.
Beverly for model number DLC-7FPC
Hello Beverly and thank you for writing. We looked up the part you need, and it is listed as No Longer Available/Discontinued for your model . There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps. Please contact us anytime.
I need pusher and sleeve assemply for DLC7 super pro food processor by Cuisanart
GERARD for model number DLC7 super pro
Hello GERARD and thank you for writing. We looked up the part you need, and it is listed as No Longer Available/Discontinued for your model . There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps. Please contact us anytime.
Hi I purchased a new work bowl which fits fine but the lid will not engage. Any suggestions
Linda for model number Dlc7
Thank you Linda for writing . Is it the correct lid for this bowl ? Part Number : DLC-016GTX-1 is in the list of compatible items for your model. Hope this helps . Please contact us anytime.
I need the whole bowl assembly. Is it still available?
Stephanie for model number DLC-7B
Hello Stephanie, thank you for your inquiry! The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
I need a replacement work bowl for a model DLC 7E are they still made
Ann for model number DLC-7E
Good Day Ann. Thank you for your question in regards to your unit (Model Number DLC-7E). Based on our research the part number for the part that is compatible with your unit is DLC-005AGTXT. You can order this part either online at our website www.eReplacementParts.com or by calling us by phone at 866-322-9842. Best Regards.
I need a replacement stainless steel blade for this food processor. Is it still available? Thank you!
Tom for model number DLC-7SFP
Hello Tom and thank you for writing. We looked up the part you need, and it is listed as No Longer Available/Discontinued for your model . There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps. Please contact us anytime.
I would like to replace my workbowl and lid to Cuisinart DLC7. Where do I go to purchase.
Marcia for model number DLC 7
Hello Marcia, Thank you for the question. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
The lid does not slide shut, hence processor won't start. Any advice? Should I get a new lid?
Estelle for model number DCL7FPC
Hi Estelle, you would have to examine what is causing the lid to not shut, likely it is caused by a faulty lid.Thank you for your question and good luck with your repair!
I have an old food processor and the main container is cracked. Can I get a replacement?
Lisa for model number DLC-7E
Hi Lisa, sadly we do not sell this part, however you can contact the manufacturer to see if they have a suggested replacement. If they can provide you with a part number feel free to contact us back to see if we have the part in stock. Thank you for your question and good luck with your repair!
I need the clear bowl. Is it still available
Marie for model number DLC7 super pro
Hello marie, Thank you for the question. Sadly, we could not find the bowl for this model. I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
the attachment that goes on the bottom of the disc, can I still get one?
Corby for model number DLC-7
Hi Corby, sadly we could not find the requested part. I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
My super pro is 35 years old and the main bowl just cracked and broke. What is the part number for a replacement bowl, and how much is it? thank you.
Deb for model number DLC7-Super Pro
Hello Deb, thank you for your inquiry! The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
Where can I get a bowl for DCL 7 food processor Cuisinart?
Peggy for model number DCL 7
Hi Peggy, thank you for your question. Unfortunately it is no longer available and does not have a replacement. We would love to help you find the part you need, but our call center agents will, regrettably, be unable to assist you with tracking it down. However, you may still be able to locate the part you need by trying the following: 1. Using a search engine to type your part number and see if other retailers still have this part in stock. 2. Visiting online stores such as eBay and finding sellers that have this part. 3. Trying retailers and repair stores in your local area to see if they have the part in their inventory. 4. Talking to a local repair technician, who may have the part you need, or may be able to repair your existing part. 5. Reaching out to the manufacturer of your product to see what their recommendations are for replacing this part. Good luck with your repair.
The middle stem which holds the slicing and shredding blades broke. Can I get a replacement for the stem piece. Thanks, Ann
Ann for model number DLC-7P
Hello Ann and thanks for writing. The part you are requesting is discontinued and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. We do carry a lot of other spare parts for units such as yours, for example, Part Number: DLC-873. Good Luck with your repair.
the stem on my DLC-7 SuperPro has broken. Are any replacements available?
Ira Sheffey
Hello Ira, thank you for inquiring. The replacement Detachable Stem for your model food processor is part number DLC-039ATX-1. Please see the related parts below. Good luck with your repair!
Several hours ago I asked about replacing the stem for my Cuisinart DLC-7SuperPro which had broken. I believe you misunderstood my question. Please answer if a replacement can be found and how much it would cost. Thank you
Ira
Hello Ira, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: DLC-039ATX-1 for the Stem. Please enter the part number into the search box on the site for the current price and availability. Hope this helps!
I am looking for a processor bowl and lid for the model number above.
Nancy for model number DLC-7E
Hello Nancy, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
I have a 30+ year old Cuisinart food processor Professional 14 model #DLC-7M. Motor and blades all good I require a new bowl and lid as there is a small chip in bowl which prevents the lid from locking on properly. Are there still replacement parts for this and if so please provide part # and where to obtain same. Thank you
Suzanne for model number DLC-7M
Hello Suzanne, thank you for your inquiry! The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
Do you have a replacement for part #DLC-039ATX?
Chris for model number DLC-7
Hello Chris, Thank you for the question. Part Number: DLC-039ATX-1 replaces obsolete part #DLC-039ATX. Hope this helps!
Is a main working bowl still available for DLC 7 Super Pro available? If so, how can I get one at what cost. The only number on the base is A1003079.
John
Hello John, thank you for your inquiry! The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
I need the bowl and the top to fit the unit Thanks,
Angie for model number DLC-7P
Hello Angie and thanks for writing. Part # DLC-016GTX-1 Lid The bowl you are looking for has been discontinued for your model and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute.
we moved recently and the stem attachment has not been found. I have four discs that I can't use without the stem. DO you carry the stem for the DLC-7PRO?
Stephanie for model number DLC-7PRO
Hello Stephanie, thank you for your inquiry. The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
I need the instruction book for the dlc-7 super pro food processor
mildred
Hello Mildred, Thank you for the question. Sadly, we could not find the manual for this model. I recommend contacting the manufacturer and seeing if they could provide you with the manual. Hope this helps!
Where can I find a workBowl for the DLC-7E
Ruth for model number Cuisinart Food Processor DLC-7E
Hello Ruth and thanks for writing. The part you are looking for has been discontinued for your model and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. We do carry other spare parts for units such as yours, for example, Part Number: DLC-016GTX-1 Good Luck with your repair.
Cuisinart DLC-7 Super Pro Food Processor. 14 cups. Model #A1211477 Where can I find work bowl and lid replacement parts? Of late, there is some resistance when trying to connect the two original parts together and also, to remove work bowl from processor. Do they need oil? or Where can I find work bowl and lid replacement parts?
/susan for model number A1211477
Hello Susan, thank you for your inquiry. The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
I am looking for the stem that the grating/slicing/shredding disc sits on. Mine just cracked while grating carrots.
Margery for model number DLC7
Hi Margery, Thank you for your question. The part number listed under your model number for the detachable stem is DLC-039ATX-1. I hope this helps. Thank you and have a great day!
I need a new lid for my food processor. What is the part number, and where can I purchase it?
Shanie for model number Dlc-7fpc
Hello Shanie, thank you for your inquiry. For your model DLC-7FPc, we have " Flat Cover W/ Cap". It is part number DLC-016GTX-1. I hope this information helps.
We need the complete assembly, bowl, lid, insert. Are they still available?
Jody Graves for model number DLC-7
Hello Jody, thank you for inquiring. For your model they are not sold as a complete assembly, but by individual parts as follows: Work Bowl With Handle, part number DLC-005AGTXT; Cover with One-piece Large Feed Tube, part number DFP-14NWBCT1; and Large Pusher Assembly, part number DLC-2014P-1. Sadly, the Large Pusher Assembly is discontinued. You will need to reach out to Cuisinart directly for a substitution part number. Please feel free to get back in touch with us to place an order. Thank you!
My food processor says the model number is BASIC. I need a bowl to replace the one that is cracked. How do I find it if there is no number on the base?
Joan for model number BASIC
Hi Joan, Thank you for your question. Cuisinart organizes the model numbers for their food processor into series numbers, and then, every few years, they will debut a new version of that series. The series for their food processors are determined by the capacity of the workbowl. If you are unable to find the model number on your food processor, you may be able to find the information you need another way. Remove the bowl from the food processor and you will find the serial number printed on the underside of the bowl, near the bottom of the handle. There should be a set of letters, either DLC or FP, followed by a dash and then three numbers. Here is a list that includes the series numbers and the serial numbers that corresponds with them: DLC-7 Series - Serial Numbers DLC-005A, dlc-005AGTX-1 DLC-7 Series, 2014 version - Serial Number DLC-2014WB DLC-8 Series - Serial Numbers DLC-865AGTX, DLC-865ATX DLC-8 Series, 2011 version - Serial Number DLC-2011WB DLC-10 Series - Serial Numbers FP-631AGTX, FP-631ATX-1 DLC-10 Series, 2007 version - Serial Numbers DLC-2007WB, DLC02007WB-1, DLC-2007WBN-1 DLC-X Series - Serial Number DLC-305G Little Pro - Serial Number DLC-505GTX-1 Miniprep - Serial Numbers DLC-195TX, DLC-2ACB, DLC-2AWB-1 I hope this helps. Thank you and have a great day!
I need a replacement 4 pc bowl set. How can I order? thank you.
sharon for model number DLC-P
Hello Sharon and thanks for writing. According to our database, the model number you provided is just a portion of a model number with multiple possible variations. To ensure that we recommend parts that will work for your model, please check your information again; you will need to provide us with the full model and serial numbers located on the sticker on the unit itself. Once we have that information, we would be happy to find the part you need.We do carry other spare parts for units such as yours, for example, Part Number: DLC-016GTX-1 Good Luck with your repair.
I am looking for the metal chopper blade for this food processor
Carol for model number Food processor
Hello Carol and thanks for writing. This comes as a disc set of 3 Part Number: DLC-873is in the list of compatible items for your model. We hope this helps. Please contact us anytime. We hope this helps. Please contact us anytime.
we have one of the original Cuisinart food processors. It is either a 7 or 8 cup. the model # has rubbed off. I can send you a picture! we need to replace the bowl lid. Can you help please?
Marylou for model number DLC ?
Hi Marylou, sadly we do need the model number, you may wish to contact the manufacturer as there may be alternative way to get the model number. Thank you for your question and good luck with your repair!
I want to order the chopping / mixing blade for the Prep 7 - 7 cup food processor. how do I do it? The part does not show up in the parts list.
Mike for model number DLC-2007N
Hello Mike, thank you for your inquiry. The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
I need to replace the chopping blade for DLC-7 model
Anna for model number DLC-7
Hello Anna, thank you for your inquiry. The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
Can I get a download the instruction book that belongs to this model?
Colleen for model number DLC-7
Hello Colleen and thanks for writing. For your convenience, we have attached the link to your manual with repair instruction. We hope this helps. Good luck with your repair. http://www.manualsonline.com/support/cuisinart/food-processor/instructionrecipe-manual-for-dlc-7-super-pro-2244252
I just came upon this model. It belonged to my now deceased brother-in-law. Is there a secret to turning it on? It's plugged in, the bowl is locked but it won't turn on.
Colleen for model number DLC-7
Hello Colleen and thanks for writing. This could be many things such as the switch or the motor, however, those parts are discontinued and are no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. We do carry spare parts for the unit just like yours. For example part number DLC-873 Good luck with your repair.
Looking for the bowl only on the Cuisinart DLC-7 PRO. Do you have one?
Shawn
Hello Shawn, thank you for your inquiry. The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
I need the work bowl with handle. Is this part still available? I have had my Cuisinart food processor since the 1980. Maybe its time for a new one.
Glenda for model number DLC-7 PRO
Hi Glenda, Thank you for your question. The part number listed under your model number for the 14 cup work bowl set is WBA-14CUPSET. We currently do not carry this part and you will need to purchase it directly from either Cuisinart or another online business. I hope this helps. Thank you and have a great day!
I need the part you use to push down in the bowl to make it grind
Shera Winebark for model number DLC-7 super pro
Hi Shera, you may be looking for the pusher assembly, this is part number DLC-018BGTXT1. Thank you for your question and good luck with your repair!
I need the stainless steel chopping blade for my DLC-7 Serial # A0141075 and work bowl. Model #'s for these parts.
Clark for model number DLC-7
Hello Clark and thanks for writing. The parts you are requesting are discontinued for your model and are no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. We do carry related parts for units just like yours. For example, part number DLC-016GTX-1 Good luck with your repair. Cuisinart 800-726-0190
I need the bowl and lid. Please
Lisa for model number DLC-7 super pro
Hello Lisa, thank you for your inquiry. The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
Do you carry the white pusher that fits in the larger pusher?
Susan for model number DLC-7
Good Day Susan. Thank you for your question in regards to your unit (Model Number DLC-7). Based on our research the part that is compatible with your unit (Part Number DLC-020BGTX-1) has been discontinued by the manufacturer and we no longer have any left in our inventory. We would recommend reaching out to the manufacturer as they may be able to advise of an alternative part that would be compatible with your unit. Best Regards.
I need a replacement lid for my DLC-7. The plastic part that closes to turn the machine on broke off
Patti for model number DLC-7
Good Day Patti. Thank you for your question in regards to your unit (Model Number Patti). Based on our research the part number for the part that is compatible with your unit is DLC-016GTX-1. You can order this part either online at our website www.eReplacementParts.com or by calling us by phone at 866-322-9842. Best Regards.
We want a new bowl. Possibly the top of bowl too. The base machine works fine and is moer than 40 years old.
Michael for model number DLC-7E
Hello Michael and thanks for writing. Bowl This part is discontinued for your model and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. We do carry related parts for units just like yours. For example, Lid part number DLC-016GTX-1 Good luck with your repair.
I am looking for a replacement lid for my DLC 7 Super Pro. The plastic locking piece is broken.
Elaine for model number A1170001
Hello Elaine, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: DLC-016GTX-1. Hope this helps!
Is part DLC-001TXB, Stainless steel main chopping blade available and if so, what is cost - Thanks - Jim
Jim for model number DLC-7M
Hello Jim, thank you for your inquiry. Part DLC-001TXB is not available on our website. I apologize for the inconvenience.
need a replacement bowl for cuisinart dlc7 Is there something that would fit? If so then would I also need to buy the cover and pusher assembly? Parts numbers, please
Lorraine for model number dlc 7
Hello Lorraine, thank you for your inquiry. The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
Is the case for this unit available?
Pixie for model number DLC7PRO
Hello Pixie and thank you for writing. No, it is not. We do carry related parts for units just like yours. For example, part number DLC-016GTX-1. Good luck with your repair.
Where do I get a picture of each part and part number. I need the main chopping mixing blade part #Vista8 (badly worn surface - hard to read) used for chopping, mixing, grinding, etc.
Chris for model number DLC-7M
Hello Chris and thank you for writing. This is the link to the part available for your model, there are pictures. Please note all other parts are discontinued. https://www.ereplacementparts.com/cuisinart-dlc7-food-processor-parts-c-147322_147329_197110.html We hope this helps. Please contact us anytime if you require further assistance.
I need to replace the detachable stem for this food processor.
Ursula for model number DLC-7
Good Day Ursula. Thank you for your question in regards to your unit (Model Number DLC-7). Based on our research the part number for the part that is compatible with your unit is DLC-039ATX-1. You can order this part either online at our website www.eReplacementParts.com or by calling us by phone at 866-322-9842. Best Regards.
I have had this unit for over 30+ years. It has always worked beautifully. Suddenly the top seems to not come in contact with the unit and it will just stop. Unit will not continually if I push on the top of the "push through" unit, it will keep running. However, I don't want to do that. As I see the spring and it appears ok, for some reason the unit will not continue to run.
Judy for model number DLC 7 food processor
Hello Judy, Thank you for the question. It could need the switch to be replaced. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. We hope this helps!
I need to purchase a replacement sleeve for this model. Can you help
Paula for model number DLC-7
Good Day Paula. Thank you for your question in regards to your unit (Model Number DLC-7). Based on our research the part number for the part that is compatible with your unit is DLC-018BGTXT1. You can order this part either online at our website www.eReplacementParts.com or by calling us by phone at 866-322-9842. Best Regards.
I am looking for a stem that attaches to the blades for my DLC 7P
Lia Kulla
Hello Lia , thank you for your question. Unfortunately, we do not have any information on that part. For more information please contact the manufacturer directly. I hope this helps!
Can I still get this?
Virvinia for model number DLC-7E
Hello, Thank you for your question. What is the part you are needing for this? Please submit a new question if you have any follow ups. We are looking forward to hearing from you.
Can I get a lid?
Virginia for model number DLC-E7
Hello, Thank you for writing in. Your part number you would need is: DLC-016GTX-1. We hope this helps.
Replacement lid for bowl
Deborah for model number DLC-7 (A1028141)
Hello, Thank you for your question. The lid we show for your model is: Part Number: DLC-016GTX-1. We hope this helps.
I need a replacement stainless steel cutting blade.
ML for model number DLC-7M
Hello, Thank you for your question. The part number listed under your model number for the stainless steel cutting/chopping blade is DLC-001TXB. We hope this helps. Thank you and have a great day.
Is it possible to get a replacement blade for this ancient Cuisinart?DLC-7 Super-Pro
Lisa for model number DLC-7
Hello Lisa, thank you for your inquiry. The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
I can't seem to get the info on DCL-7 4 piece Tritan Bowl set when I search for it
Jim for model number DLC-7
Hello Jim, thank you for your inquiry. The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
The plastic sheath on the motor stem has shredded and needs to be replaced. Is therea part number and can I fix it at home. Also the plastic stem that attaches to the graters is cracked.
Judy for model number Cuisinart Food Processor DLC 7 Super Pro 1976
Hello Judy, thank you for your inquiry. The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
Do you have the work bowl for this product?
John for model number DLC-7 PRO
Hello John, thank you for your inquiry. The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
I need to purchase a new pusher assembly (the part that covers the the work bowl and slips into the slot to make the machine run).
Shari for model number DLC 7 Pro (14 cup)
Hello and thank you for writing. Cover with large pusher tube # DLC-2014WBCN-1 is in the list of compatible parts for your model. We hope this helps. Please contact us anytime if you require further assistance.
Do you have replacements for the work bowl and the 2 part cover? Over the 40+ years I've used the food processor the tab-like connecting plastic parts have worn off. Without the engagement of these parts the motor will not turn on. If you do not have them could you give me the part numbers? Thank you.
Linda for model number DLC-7E
Hello and thank you for writing. We carry the cover # DLC-016GTX-1 but not the work bowl, we do not have the numbers for the bowl. We hope this helps. Please contact us anytime if you require further assistance.
The plastic cap over the steel center shaft was loose and stuck in the shaft assembly for the blade and cracked it. They are now stuck together , Can they both be replaced or is my food processor now an antique?
Doris for model number DLC-7 Super-pro
Hello, Thank you for the question. I looked up the part and it is No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. We hope this helps.
Need the mot0r base
Kathie for model number dlc-7superproA1143071
Hello Kathie, thank you for your inquiry. The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
I recently bought a replacement lid DLC017BGTX. Now the work bowl is broken. The numbers on the bowl are: DLC 005AGTX. The only one I can find on line is DLC 005 AGTX 1. Is that the same and will it fit the new lid?
Susan for model number DLC 7P
Hello Susan, thank you for your inquiry. Unfortunately the correct bowl that fits cover DLC-017BGTX-1 has been discontinued. We apologize for the inconvenience.
I am looking for a detachable stem for a "old" food processor...the no. on stem is DLC-7 serial no. A0681826 hope you can provide one..thanks you
jimmie for model number DLC-7pro
Hello Jimmie, thank you for your inquiry. The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
A small tab that pushes on the plunger rod, broke. Is there a replacement part available?
Andrew for model number DLC 7P
Hello Andrew, thank you for your inquiry. The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
I need a bowl cover for a DLC-005AGTXT1 bowl. Do you know where to find one?
steve for model number see question
Hello Steve, thank you for your inquiry. We show that cover DLC-016GTX-1 is compatible with bowl DLC-005AGTXT1. We hope this information helps!
I have a wall hanging rack for holding the cutting blades. It holds 8 metal blades, the dough blade and the pedestal the blades attach to. It has broken. Are there replacement racks?
Joan for model number DLC-7 food processor
Hello Joan, thank you for your inquiry. The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
I need a complete work bowl for this DLC-7 plus a new knife blade. I also have aDLC7Pro serial #0075076need a omplete work bowl plus knife blade for this one.Please advise
Betty for model number A1149730
Hello Betty, thank you for your inquiry. The part you described does not appear in the parts list for this model. Please reach out to Cuisinart at 1-800-726-0190 directly to obtain the part number you need to order. Once you have this information, please feel free to check back with us for pricing and availability information. Thank you.
I need a work bowl cover for a DLC-7 Pro. Do you carry this item and how much is it ?. If not, will the part number DLC-017bgtx work on my work bowl ?
Michael for model number DLC-7 Pro
Hello Michael, thank you for your inquiry. Correct cover is part number DLC-016GTX-1. We hope this information helps.
Discussion
Discussion for the Cuisinart DLC-7 Food Processor

Discussion is closed. To ask our experts a question about a part, use the Q&A feature on our product pages.
Question: Cuisinart Bowl Security Stem

ttWiggle

The white locking pin at the back of the bowl has fallen out. I cannot figure out what is missing (a spring?) or how to make it work. Many thanks in advance!
It is a DLC-7. Thank you again.
WJA
It looks like the part you need is no longer available.
Question: Replacement

mlr

I have a 1978 DLC-7 processor that the engager tab has broken the large push sleeve. Is the correct replacement # 018BGTXT1 ??
WJA
Unfortunately the manufacturer no longer supplies the part you need.
Question: Blade ATTACHMENT PART

thekittymouse

Is the piece where blades are attached available for the DLC-7P?
WJA
Unfortunately it is not. It has been discontinued by the manufacturer, with no replacement.
Question: Part

Dannyboy71

Work Bowl with Handle, is the part available
WJA
The work bowl is no longer supplied by the manufacturer.
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy