eReplacementParts.com
877-346-4814
Cuisinart Food Processor Parts
Repair Parts Home  Appliance Parts  Cuisinart Parts  Cuisinart Food Processor Parts  Cuisinart DLC-10C Pro Classic Food Processor Parts


We Sell Only Genuine Cuisinart ® Parts.

 Cuisinart DLC-10C Pro Classic Food Processor Parts




Accessories
Accessories for the Cuisinart DLC-10C

Questions & Answers

I need a new pusher for my food processor. Do you have any that would fit ModelNo. DLC-10E?
Syd Hockett for model number DLC-10E
Hello Syd, thank you for your question. The large pusher is discontinued and there are no replacements. The small pusher is Part Number: DLC-120BGTX-1. I hope this helps!
I am looking for the metal blade for the DLC-10. The number on the blace is FP-100TX. Is it available?
Theresa for model number DLC-10
Hello Theresa, Thank you for the question. Sadly, we could not find the requested part, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Need a bowl for food processor dlc-5
Tawnya stapleton
Hello Tawnya, thank you for writing. The replacement for model DLC-5 is part number FP-631AGTXT1. Good luck with your repair!
I need an instruction manual for the Cuisinant Pro Classic food processor This is an older model that was given to me by a person that is no longer able to use it.
Wanda
Hello Wanda, Thank you for writing. Sadly, the manual you are requesting we do not have listed. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. Hope this helps!
Need the upper plastic sleeve for a cuisinart food processor, model DLC-10E. This is the part with the oval shaped sleeve that fits over a similar shaped sleeve and then when twisted, locks tothelower bowl and pushes inthe safetybutton. Can you tellmewhatpart or parts to order? Thanks.
Blake for model number DLC-10E
Hello Blake and thanks for writing. According to our database, the model number you provided is just a portion of a model number with multiple possible variations. To ensure that we recommend parts that will work for your model, please check your information again; you will need to provide us with the full model and serial numbers located on the sticker on the unit itself. Once we have that information, we would be happy to find the part you need. We do carry a lot of other spare parts for units such as yours for example Part Number: DLC-844TX-1. Good Luck with your repair
Still works are there replacement parts available such as bowl and top
Sue for model number C5288672
Hello Sue, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: FP-631AGTXT1 for the Bowl and Part Number: DLC-117BGTXT1 for the cover. Hope this helps!
I am looking for a new blade and a new bowl and cover for the cuisinart food processor DLC-10. Thanks
Leslie Lansing for model number DLC-10
Hello Leslie, thank you for your question. Unfortunately, we only have the dough blade listed in the model information. The bowl is Part Number: FP-631AGTXT1 and the cover is Part Number: DLC-117BGTXT1. The dough blade is Part Number: FP-749TX-1. Please enter the part number into the site for current price and availability. Good luck with your repair!
Is the plastic in older Cuisinart food processors safeto use?
Craig for model number DLC 10E
Hello Craig, thank you for your question. The older units were not BPA free, but still safe to use. We would recommend contacting Cuisinart or resubmitting a question with the replacement parts you might need so that we can see if we have new plastic parts for you. I hope this helps.
I have an old, old Cuisinart Food Processor with model number DLC-10Plus Food Processor. Are there still parts available for this model?
Robert for model number Cuisinart DLC-10Plus Food Processor
Hello Robert and thanks for writing. You can find the available parts for your model under this link https://www.ereplacementparts.com/cuisinart-dlc10c-pro-classic-food-processor-parts-c-147322_147329_147543.html We hope this helps. Please contact us anytime.
I need a new work bowl for my DLC-Pro.My current bowl is cracked and one of the eyes is broken I could not find a model # on the bottom
trent for model number DLC-PRO
Hello , Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. We hope this helps.
Looking for a spare work bowl in case the one I have cracks or breaks
Mary Ellen for model number DLC 10 plus
Hello Mary Ellen, Thank you for the question. I have researched the model you have provided and have found the part you are looking for is Part Number: FP-631AGTXT1. We hope this helps!
Looking for replacement 7 cup Bowl and top?
Patti for model number DLC-10C
Hello Patti, Thank you for your question. The work bowl for your model is under part FP-631AGTXT1, and the top cover for the bowl is under part DLC-116GTXT1 for your model. We hope this helps.
I need a new carafe and cover please......
Mike for model number Dlc-10c
Hello Mike, thank you for your inquiry. The replacement bowl for model DLC-5 is part number FP-631AGTXT1 and the cover is part number DLC-117BGTXT1. We hope this information helps!
I have an old Cuisinart food processor DLC58C that the bowl and top is cracked. Can I get a new one? It still works other than this Thanks
Diane for model number DLC58C
Hello Diane, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: FP-631AGTXT1 for the bowl and Part Number: DLC-117BGTXT1 for the cover. We hope this helps.
Discussion
Discussion for the Cuisinart DLC-10C Pro Classic Food Processor

Discussion is closed. To ask our experts a question about a part, use the Q&A feature on our product pages.
Question: How Does One Take Apart Nylon Li...

1199060

It is difficult to clean the main linkage on this part. I've read that the nylon plunger enclosure is removable. How is this done? Thank you.
WJA
Hello 1199060,

Cuisinart does not supply internal parts to end users of their products. And we can only provide the slicing discs,pushers, blades and other types of accessories. You may want to contact the manufacture @ 800-726-0190.

-WJA
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy