866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  Bosch Parts  3600703011 Cord Protector

Cord Protector

Part Number: 3600703011
Bosch
Availability: 7 in stock
Price: $1.99
Quantity:
Ships within 1 business day

*This part replaces obsolete part #: and 1600703010.

Specifications
  • Ø7,9-Ø12x120 MM
Description:
This is a Genuine OEM Bosch replacement Protector Grommet which is used on a variety of Power Tools. This part is made out of Rubber and is Sold Individually. It is important to have a cord protector on your tool to improve friction, seal cable and protect it from a potential damage.
Product Information
Manufacturer: Bosch
Product Number: 3600703011
Classification: Part
Weight: 0.05 lbs.
Shipping: Ships Worldwide
Related Products
Brush Set
Brush Set
$14.09
Compatibility

This part is compatible with the following machines:

Bosch

Products Compatibility

This item works with the following types of products:

  • • Chop Saw
  • • Demolition Hammer
  • • Drill
  • • Electric Drill
  • • Grinder
  • • Hammer Drill
  • • Impact Wrench
  • • Polisher
  • • Rotary Hammer
  • • Saw
  • • Shear
Expand List
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Demolition Hammer
Parts Used:
Cord Protector - 3600703011
O-Ring - 1900210130
O-Ring - 1610210042
O-Ring - 1610210041
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Allen wrenches
Oil leaking.
Removed the lower section of the tool. Replaced O-rings, seal, cord and cord protector. I used the exploded view of my tool on your website, which proved to be super helpful.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Power Cord - 1604460092
Cord Protector - 3600703011
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Power cord was old and had insulation cracking.
1.Removed handle from grinder
2.Removed screws to separate the two halves of the handle
3.Removed cord retaining clamp and loosened electrical connections to remove old cord
4.Made electrical connections with new cord and secured with retaining clamp
5.Make sure the switch was properly in place and wire with cord protector
6.Secured the two halves of the handle with screws
7.Reattached handle to grinder body
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Parts Used:
Power Cord - 1604460092
Cord Protector - 3600703011
Cheese Head Screw - 2914551114
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Power cord was damaged.
1. Remove ON/Off switch with flat head screwdriver.
2. Remove the six screws holding the handle assembly to the main body.
3. Remove old power cord, keeping in mind its orientation and where the wires connected.
4. Install new cord protector and connect wire ends into their correct locations.
5. Reattach handle assembly with the six screws.
6. Place On/Off switch half-way in its location and snap the other end in.
7. Verify that the machine functions properly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Cord Protector - ( 3600703011 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy