eReplacementParts is proud to be the Preferred Partner of dozens of leading equipment brands that build the gear you love. That means our inventory and availability are unmatched, and in some cases, we are the exclusive parts providers for these brands for their OEM parts programs.
Hitachi Parts
We sell only genuine Hitachi ® parts.
Trusted Partner
?
OR
Popular Hitachi Product Types
See AllPopular Hitachi Parts
- Manufacturer Part Number:
- 890385
This is a genuine OEM approved replacement part designed for use with Hitachi nailers. It is the part of the nail gun that drives the nail into the material that is being used. These assemblies do have a tendency to bend or break if not used correctly or if you are driving nails into extra hard material. Includes a metal piston, driver and the o-ring. To help extend the life of a pneumatic tool u...
- Manufacturer Part Number:
- 878888
This Hitachi replacement piece is authentic OEM. An O-ring is a bendable part that is used to create a pressure seal between rigid pieces. It is often an essential component of machines and replacement could greatly improve performance. Sold individually.
- Manufacturer Part Number:
- 886107
This is a Genuine OEM Hitachi replacement part which is sold individually. When the guide lock is locked into place, the guide will be set in its current position and no longer adjustable. To adjust, the pin must be pulled. If the part is cracked or damaged otherwise it must be replaced immediately.
- Manufacturer Part Number:
- 877325
This is a genuine Hitachi replacement part, it is sold individually. The purpose of the 877325 Gasket is to create a seal between the Exhaust Cover and the Main Body of the nail gun models shown below. Because of the pressure this Gasket is subject to it will wear and will need to be replaced Indications are an air leak, sluggish or not sinking the nail, or the driver not retracting.
- Manufacturer Part Number:
- 375131
This is an authentic replacement part manufactured for use with Hitachi circular saws. The special return spring is used to provide tension on the blade guard to keep the guard covering the blade and allows it to pivot when the saw is cutting through stock. This return spring is available as an individual replacement part, please see model diagram for associative parts.
- Manufacturer Part Number:
- 999044
Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Hitachi replacement parts, and comes packaged in a Hitachi retail box. rnThis brush set will fit the Hitachi tools listed at the bottom of the page. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New bru...
- Manufacturer Part Number:
- 999043
This is a genuine Hitachi replacement part, they are sold as a pair (2). Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and ...
- Manufacturer Part Number:
- 12318139130
This is a genuine OEM replacement part, it is sold individually. By pressing the bulb, It will purge all of the air out of the carburetor. Then fuel will come up from the fuel tank through the fuel line then into the carburetor. Then the excess fuel will be forced back into the fuel tank through the fuel return line. At some time the primer will lose its elasticity or crack and need to be replace...
- Manufacturer Part Number:
- 877368
Genuine Hitachi replacement part, this item is sold individually. The 877368 O-Ring is placed in the groove on top of the Piston of the model numbers shown below. This part aids in the operation of the piston driving the fastener and recoiling the piston. If the piston is not working properly check this part along with all of the other O-rings and Seals in the tool.
- Manufacturer Part Number:
- 883511
This is a genuine Hitachi replacement part, this item is sold individually. The purpose of this Piston Bumper is to keep the piston from hitting the bottom of the cylinder and damaging it. Because this part get so much abuse it has a tendency to crack and fall apart. If you see and parts of this bumper falling from your nail gun, it is definitely time to replace it.
- Manufacturer Part Number:
- 878422
Genuine Hitachi power tool replacement part used on Framing and Strip Nailers. It is a Metal Spring with a Plastic Center Insert. This Ribbon Spring is part of the Magazine Assembly and it assists in the loading mechanism by providing tension on the Nail Feeder. Over time this part might become damaged due to extensive usage and it would need to be replaced.
- Manufacturer Part Number:
- 877334
This is a genuine Hitachi replacement part, it is sold individually. Its purpose is to create a seal and prevent air leaks. Over time this gasket will deteriorate and will have to be replaced. This specific gasket is commonly used in nailers, and is compatible with the models listed below.
Popular Hitachi Models
-
Hitachi C10FSH
-
Hitachi NV65AH2
-
Hitachi C12FDH
-
Hitachi C15FB
-
Hitachi C10FSB
-
Hitachi NR83A3
-
Hitachi VB16Y
-
Hitachi EC2510E
-
Hitachi C8FB2
-
Hitachi P12RA
-
Hitachi C12RSH
-
Hitachi EC12
-
Hitachi NR83A5
-
Hitachi NR38AK
-
Hitachi C12LSH
-
Hitachi NR90AE(S1)
All Hitachi Product Types
✖