eReplacementParts.com
877-346-4814
Makita Parts
Repair Parts Home
  
Power Tool Parts
  
Makita Parts
  233376-2 Compression Spring

Compression Spring 233376-2

OEM part for: Makita

Part Number: 233376-2


Install
Videos!
Compression Spring - 233376-2:Makita 360 View
Compression Spring - 233376-2:MakitaCompression Spring - 233376-2:MakitaCompression Spring - 233376-2:Makita 360 View
In Stock
Order within the next 3 hours and your part ships today!
Easy Less than 15 minutes (4 rated repairs)?
OEM: Original Equipment Manufacturer ?
Makita
Does this d-block d-md-none fit my product?

Product Description ?

This is a genuine Makita replacement part, it is sold individually.
The 233376-2 Spring is part of the spindle lock system on the Grinders shown below.
The reason for locking the spindle is so that you can remove and replace grinding wheels.
The other parts need for the spindle lock system are part numbers.

  • 417771-6 Pin cap
  • 256486-8 Shoulder Pin
  • And 256486-8 O Ring.

    • Classification: Part
    • Weight: 0.01 lbs.
    • Shipping: Ships Worldwide

    Frequently Purchased Together ?

    Compatibility

    This part will fit the following 19 machines

    Makita

    9558NB Angle Grinder View Diagrams & Manuals
    9558PB Angle Grinder View Diagrams & Manuals
    9557NB Angle Grinder View Diagrams & Manuals
    9557PB Angle Grinder View Diagrams & Manuals
    9554NB Angle Grinder View Diagrams & Manuals
    9553NB Angle Grinder View Diagrams & Manuals
    9550H Grinder View Diagrams & Manuals
    9553B Grinder View Diagrams & Manuals
    9553NBK Grinder View Diagrams & Manuals
    9554NBK Grinder View Diagrams & Manuals
    9555NB Grinder View Diagrams & Manuals
    9555NBK Grinder View Diagrams & Manuals
    9557NB2 Grinder View Diagrams & Manuals
    9557PBX1 Grinder View Diagrams & Manuals
    9558HN Grinder View Diagrams & Manuals
    Show More Compatible Models
    Don't see yours? Try searching our site for :

    This item works with the following types of products:

    • Grinder Parts

    Repair Videos ?

    Watch the Repair Video for Compression Spring
    Articles:
    Lock button spring sprung? Fix the compression spring on your Makita grinder with these step-by-step instructions....
    December 01, 2015

    Customer Part Reviews ?

    5
    Average Rating (out of 5):
    1 Review
    Click to filter by ratings:
    5 stars
    1
    4 stars
    0
    3 stars
    0
    2 stars
    0
    1 stars
    0
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
  • All parts ordered were great
    All the parts I ordered were the exact fit for my makita angle grinder made the repair easy. My order arrived quickly so down time was short. I will definitely order from eReplacemet parts again
    Guest - July 21, 2022 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Compression Spring


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy Less than 15 minutes (4 rated repairs)?

    Locking pin broke

    steven - March 24, 2022
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    Followed video on your website. Very helpful
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    the pushpin that locked the wheel chuck broke

    Richard - April 8, 2019
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Pliers, vise

    took out the old parts and replaced with new
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Cover cap fell off

    John - March 5, 2019
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Brass punch & hammer

    Put spring over pin, cap on top of spring, lightly tapped with punch & hammer.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    DRIVEN GEAR TEETH CHIPPED

    JOSH - January 7, 2019
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Wrench Set, SNAP RING PLIERS AND VICE GRIPS

    REMOVED 4 SCREWS HOLDING ON THE DRIVEN GEAR HOUSING AND REMOVED FROM TOOL.

    CLEANED GREASE FROM GEAR.

    REMOVED SNAP RING.

    REMOVED DAMAGED DRIVEN GEAR AND INSTALLED NEW DRIVEN GEAR.

    REINSTALLED SNAP RING.

    REMOVED NOSE HOUSING.

    CLEANED GREASE FROM INSIDE HOUSING AND DRIVE GEAR

    USED VICE GRIPS TO HOLD GEAR AND 10 MM WRENCH TO REMOVE NUT.

    REMOVED OLD DRIVE GEAR AND INSTALLED NEW DRIVE GEAR.

    REINSTALLED NUT.

    USED SEMI-FLUID GREASE TO LUBE GEARS.

    REINSTALLED HOUSINGS.

    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal