eReplacementParts.com
877-346-4814
DeWALT Parts
Repair Parts Home  Power Tool Parts  DeWALT Parts  153755-01 Clamshell Handle

Clamshell Handle 153755-01

OEM part for: DeWALT

Part Number: 153755-01


Install
Videos!
Clamshell Handle - 153755-01:DeWALT 360 View
Clamshell Handle - 153755-01:DeWALTClamshell Handle - 153755-01:DeWALTClamshell Handle - 153755-01:DeWALT 360 View
Usually ships in 7 - 12 business days
Leaves our warehouse within
7 - 12 business days
Easy 15-30 minutes (27 rated repairs)?
OEM: Original Equipment Manufacturer ?
DeWALT
Does this d-block d-md-none fit my product?

Product Description ?

Genuine Dewalt replacement part, this item is sold as a kit. The 153755-01 includes both the upper and lower handle. The part is where the trigger switch fir the Miter Saws shown below is placed. This is also the handle that you raise and lower the blade with, and also pull to make a cut in the material you are cutting.

  • Classification: Part
  • Weight: 0.61 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 5 machines

DeWALT

DW708 Type 1 Crosscut Miter Saw View Diagrams & Manuals
DW708 Type 3 Crosscut Miter Saw View Diagrams & Manuals
DW708 Type 4 Crosscut Miter Saw View Diagrams & Manuals
DW708-B2 (Type 2) Mitre Saw Power Tool View Diagrams & Manuals
DW708-BR (Type 2) Mitre Saw Power Tool View Diagrams & Manuals
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Miter Saw Parts
  • Saw Parts

Customer Part Reviews ?

4.9
Average Rating (out of 5):
32 Reviews
Click to filter by ratings:
5 stars
30
4 stars
2
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
  • 3
NEXT >
  • Fast delivery and part fit perfect
    Part fit perfectly and fast delivery
    Guest - December 30, 2023 Verified Purchase
    easy repair
    arrived very fast
    Guest - October 5, 2023 Verified Purchase
    Back in service.
    Your site helped me to acquire the correct part and it fit perfectly.
    Guest - August 17, 2023 Verified Purchase
    10 minute repair.
    Part shipped and arrived quickly, fit was perfect.
    Guest - May 23, 2023 Verified Purchase
    Worked as expected
    Perfect fit
    Guest - April 7, 2023 Verified Purchase
    easy repair, worked as expected
    part arrived in great condition. saw works fine now. thanks for the part
    Guest - February 21, 2023 Verified Purchase
    It was a perfect match.
    The handle was exactly what I ordered. It fit perfectly with little effort.
    Guest - December 10, 2022 Verified Purchase
    Nice!
    Part as expected. Fits perfect.
    Guest - October 11, 2022 Verified Purchase
    Works Great 👍
    The part arrived quickly and was very easy to install. Exactly what I expected. Great service.
    Guest - July 4, 2022 Verified Purchase
    Miter saw handle
    The part fit perfect and was easy to install!
    Guest - December 21, 2021 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Clamshell Handle


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (27 rated repairs)?

    Handle broke in two and kerf damaged.

    Kenneth - January 8, 2016
    👍 12 of 12 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Socket set, Star drive

    Remove screws and pay attention to the wiring layout within the handle. Clean parts with an old toothbrush and begin the process of placing the parts in the clean mountings. Remove the screws from the old kerf plates and install new ones. Easy work. Patience.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Dropped saw on ground busting handle

    MARK - May 27, 2016
    👍 7 of 8 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Cordless screw driver

    Take pictures to remember where wires go. Unscrew and remove old handle, Place new handle bottom in place. Put wires and switch where they go, refer to pictures . Screw on top piece of handle.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Handle was broken.

    Bernice - May 22, 2017
    👍 4 of 4 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    1. Removed the old handle.
    2. Moved the wires out of my way.
    3. Put the bottom half on and secured it to the saw.
    4. Placed the wires back in proper places, including the trigger switch.
    5. Installed the top half of handle with screws.
    6. Tested the saw, clicked heels and walked away.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Broken handel and kerf

    Sharon - November 28, 2015
    👍 4 of 4 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    Remove the screws from the old handle set. Remove switch. reinstall switch into handle half. Reinstall handle to saw. Remove the screws from the broken kerf boards. place new kerf boards in table and screw down.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The top part of the two piece hand-gripped handle was broken

    Elton - February 11, 2018
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    I removed the top part of the handle with a screwdriver, installed the new part, and replaced the screws. It was ready to be used..
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Handle broke on my old 12" miter saw

    Steven - March 6, 2019
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed screws ,took out wire loom. Installed new handle. Reinstall wire loom.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    handle on saw broke

    jerald - February 23, 2019
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    removed old handle and replaced with new handle. EASY AS PIE
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Handle

    Kurt - February 6, 2019
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    broken handle

    James - January 31, 2019
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , star driver

    took the broken handle off. took a cell phone picture of the wiring runs through the handle. removed trigger hold down screw. replaced the bottom half of handle, positioned the switch wires in the wire slots, then positioned the top handle. Note that 3 different sizes of star driver screws are present.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Trigger handle was broken

    Roy - January 16, 2019
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Wrench Set

    All went well, it was an easy repair.
    Thanks to you guys for having the part I needed.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal