Chainsaw Replacement Parts

• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.

Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Over time a Spark Plug will become fouled because the air/fuel ratio may be set wrong,worn piston rings, carbon build up and other factors.
It is better to replace a fouled spark plug, rather then trying to clean it.

The other way a fuel tank is vented in other engines is by use of a fuel cap with a air vent built into it.

It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced.

We do have an article and video on How to Replace the Fuel Filters in Your Outdoor Power Equipment..

You can see this by going to the front page of our site and clicking on Repair Center.