eReplacementParts.com
877-346-4814
Makita Parts
Repair Parts Home
  
Power Tool Parts
  
Makita Parts
  CB76 Carbon Brush Set

Carbon Brush Set CB76

OEM part for: Makita

Part Number: CB76


Install
Videos!
Carbon Brush Set - CB76:Makita 360 View
Carbon Brush Set - CB76:MakitaCarbon Brush Set - CB76:MakitaCarbon Brush Set - CB76:Makita 360 View
In Stock
Order within the next 2 hours and your part ships today!
Easy Less than 15 minutes (16 rated repairs)?
OEM: Original Equipment Manufacturer ?
Makita
Does this d-block d-md-none fit my product?

Product Description ?

Genuine Makita replacement part
Set of 2 Carbon Brushes with wire leads and brush springs attached.

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components.  Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement.  Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.  A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned.  When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

  • 5x8mm
  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 28 machines

Makita

N1900B Planer View Diagrams & Manuals
3700B Trimmer View Diagrams & Manuals
4301BV Jig Saw View Diagrams & Manuals
6905B Impact Wrench View Diagrams & Manuals
9030 Belt Sander View Diagrams & Manuals
9501B Grinder View Diagrams & Manuals
9505BH Grinder View Diagrams & Manuals
DA3000R Drill View Diagrams & Manuals
JN1600 Nibbler View Diagrams & Manuals
JS1600 Metal Shear View Diagrams & Manuals
JS1670 Metal Shear View Diagrams & Manuals
3702B Laminate Trimmer View Diagrams & Manuals
906H Die Grinder View Diagrams & Manuals
6301LR Electric Drill View Diagrams & Manuals
N1923B 3-1/4" Power Planer View Diagrams & Manuals
6013BRK (Type 2) Drill View Diagrams & Manuals
BO6010 Sander View Diagrams & Manuals
DA3000R (Type 2) Drill View Diagrams & Manuals
DA3000 (Type 2) Drill View Diagrams & Manuals
N1900BK (Type 1) Planer View Diagrams & Manuals
N1900BKX (Type 1) Planer View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Planer Parts
  • Trimmer Parts
  • Jig saw Parts
  • Saw Parts
  • Drill Parts
  • Impact Wrench Parts
  • Sander Parts
  • Grinder Parts
  • Nibbler Parts
  • Shear Parts
  • Laminate Trimmer Parts
  • Electric Drill Parts

This part replaces obsolete part #: 643050-8, 643053-2, 643072-8, 191912-9, 643052-4, 191947-0

Repair Videos ?

Watch the Repair Video for Carbon Brush Set
Articles:
Step-by-step instructions for removing and installing the motor brushes on your Makita planer....
August 06, 2018

Customer Part Reviews ?

5
Average Rating (out of 5):
6 Reviews
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Great communication, easy ordering, fast shipping.
    They even follow up with you. Outstanding service. The carbon brush set received was a genuine Makita part and got me going again in no time at all.
    Stephen - March 2, 2023 Verified Purchase
    Great part
    New. Ease to replace. Tools working again!
    Guest - July 13, 2022 Verified Purchase
    Works as advertised
    Dropped right in, grinder works as it should.
    Guest - June 19, 2021 Verified Purchase
    worked
    no problem, worked perfect
    Dennis - April 2, 2021 Verified Purchase
    Another good purchase
    Prompt shipment, considering the Covid epidemic. Correct part received at a reasonable price. Thanks!
    Guest - October 30, 2020 Verified Purchase
    working like new
    arrived very fast thank you bill
    iGlobal - September 21, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush Set


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy Less than 15 minutes (16 rated repairs)?

    Would not run

    Gary - May 5, 2016
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Impact Wrench

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, None

    Removed the brush caps with a screwdriver, then removed the old brushes, and installed the new brushes and replaced the brush caps. Works great. THANKS.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bad brushes

    Benjy - July 18, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Impact Wrench

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Air hose to blow it out

    Remove old brush caps used air hose to blow the dirt out of it
    Popped in the new brushes and put on the new caps
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes wore out

    Ignacio - April 19, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Jig saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove the brush caps
    Remove the old brushes
    Installed the new brushes
    Screwed the brush caps back on
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Planer would not start or run.

    Dwayne - November 3, 2021
    Tool Type

    Planer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    1 Removed brush cap
    2 Removed old brushes
    3 Installed new brushes
    4 Put brush caps back on
    5 Plug into hot outlet, pull trigger. Runs like a champ.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bad bearing and gear

    Martin - October 3, 2021
    Tool Type

    Grinder

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, None

    Replaced defective parts installed new brushes and grease
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Planer just stopped working

    Wayne - October 21, 2020
    Tool Type

    Planer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    I suspected the switch had gone bad,so I installed the new switch first.Nope,still didn't run.Installed the brushes and she runs like a new one.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Planer would not run, my brother who owned the tool told me brushes were bad before he passed and I inherited it

    David - August 20, 2020
    Tool Type

    Planer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Replaced brushes
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bought a used Makita planer at estate sale. It worked but was in bad shape.

    Mark - October 12, 2019
    Tool Type

    Planer

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    I simply removed the worn parts and used the new ones as replacements. only tools used were a phillips screwdriver. Just be sure to note how the wires are routed in the case. I did install new ring terminals on the new cord, to insure a secure connection to the switch.

    Overall very easy repair.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    motor would not run. Switch tested OK electrically

    Lloyd - April 6, 2019
    Tool Type

    Planer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Pliers

    removed brush holding plugs with screwdriver
    Pulled out brushes with needle nose pliers. They were a bit stuck.
    put in new brushes
    replaced plugs.
    Motor ran
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Grinder would not work

    James - March 20, 2019
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed old brushes and installed new ones
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal