Easy
Less than 15 minutes
This replacement part is specially designed for use with DeWALT and Black and Decker bench grinders. The capacitor is a two-terminal electrical device used to store electrical energy in the form of an electric field. It provides leading current in AC circuits. In a DC circuit, the capacitor once charged with the applied voltage acts as an open switch. This is an identical replacement for a missing or a faulty component that was installed on a new unit. Please make sure to refer to the appropriate diagram of your model for the correct location and application of this capacitor. Keep in mind this high-quality item is sold individually.
Capacitor 284450-00
OEM part for: DeWALT, Black and Decker
Part Number: 284450-00
$12.44
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 3 machines
Black and Decker
9407 Type 1 Bench Grinder View Diagrams & Manuals
9407 Type 3 Bench Grinder View Diagrams & Manuals
9407 Type 2 Bench Grinder View Diagrams & Manuals
This item works with the following types of products:
- Bench Grinder Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
part works ok
part works like it’s suppose to
Guest -
May 11, 2021
Verified Purchase
A life saver
My part arrived sooner than I expected.
Almost identical to my old burned out capacitor, I installed it in about 5 mins. , and then there was life in my bench grinder again. Also the part I thought was reasonably priced. This is a good company to order parts from, the'll deliver.
Guest -
May 29, 2019
Verified Purchase
capacitor saved the day
it brought to life a 25 year old bench grinder tks.
Guest -
October 25, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Capacitor
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Capacitor
Phillip - February 11, 2020
Tool Type
Bench Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Unplug grinder
Remove base plate with phillips screw driver
Remove Capacitor mounting strap with Phillips screwdriver
Remove electrical tape from wire nuts
Disconnect wire nuts from capacitor wires and grinder
Reverse to install
Remove base plate with phillips screw driver
Remove Capacitor mounting strap with Phillips screwdriver
Remove electrical tape from wire nuts
Disconnect wire nuts from capacitor wires and grinder
Reverse to install
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Grinder would barely run
Les - June 9, 2018
Tool Type
Bench Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Remove the cover from the bottom of the base.
2. Unscrew the capacitor clamp.
3. Remove the wire nuts from the capacitor wires.
4. Reverse directions to install the new capacitor.
2. Unscrew the capacitor clamp.
3. Remove the wire nuts from the capacitor wires.
4. Reverse directions to install the new capacitor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Capacitor over heated
samuel - December 3, 2016
Tool Type
Bench Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Phillip screwdriver
Parts Used
Unscrewed the wires to capacitor going to motor on grinder then put new capacitor in it place and reconnected the the wires to motor. The 6 inch grinder worked like as expected.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Capacitor was burned out
Michele - June 19, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Bench Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
I removed faulty electrical component and installed the new one. Either have a background in electronics or label the wires properly when removing component so that you can rewire correctly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
