Easy
15-30 minutes
This cord protector is a genuine Metabo replacement part and is sold individually.
Cord Protectors are designed to slide onto your cord and fit securely at the end, where it’s firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.
Cable Sleeve 344100970
OEM part for: Metabo
Part Number: 344100970
$4.99
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Cable Sleeve will fit the following 79 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 79 matching models.
Metabo
Show More Compatible Models79 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Metabo
This item works with the following types of products:
- Circular Saw
- Drill
- Electric Drill
- Grinder
- Hedge Trimmer
- Polisher
- Rotary Hammer
- Sander
- Saw
- Trimmer
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy to find and easy to purchase and fast delivery
Great
Guest -
March 30, 2023
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Cable Sleeve
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Toll was droped аrom a height.
Dmitriy - April 4, 2020
Tool Type
Grinder
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
It was easy.
I followed drawing for angle grander.
Step by step I fixed all problems with tool.
I followed drawing for angle grander.
Step by step I fixed all problems with tool.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bad cord and faulty switch.
Marc - March 19, 2020
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed screws from housing
disconnected cord from switch
disconnected witch from internal wiring
reconnected cord to switch
reconnected switch to internal wiring
screwed the switch and cord back into place
screwed housing back together
disconnected cord from switch
disconnected witch from internal wiring
reconnected cord to switch
reconnected switch to internal wiring
screwed the switch and cord back into place
screwed housing back together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
old cord cracked and peeling
Daryl - April 8, 2019
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, soldering iron
Parts Used
1. remove the switch cover 2.loosen the screws on the switch and remove the old cord 3.cut wires to length 4. strip and solder the tip of each wire 5.insert the wires into the switch and tighten the screws 6.put the cover back on ...done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Power cord jacket starting to crack open.
Tommaney - September 25, 2018
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Torx wrench, plier and wire stripper cripper.
Took the covers off just the half on my grinder, blew out all the fine dust accumulation in the housing with air compressor and replace the power cord and brushes, now its is as good as new almost.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Damaged power cord
Lee - September 13, 2016
Tool Type
Grinder
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Torx
1. Disassemble case
2. Replace brushes
3. Solder wire ends on new power cord
4. Test run
5. Check for voltage "leakage" from tool body with multi-meter
2. Replace brushes
3. Solder wire ends on new power cord
4. Test run
5. Check for voltage "leakage" from tool body with multi-meter
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
