Brushbar Service Assy DY-96470501
Part Number: DY-96470501
Order within the next 5 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 964705-01.
Product Information
Description:
| This is an authentic Dyson replacement part that has been sourced from the original manufacturer to be used with upright vacuums. The brushbar fits into the cleaner head and is used to pick-up dirt to be collected by the vacuum. This item is available as an individual replacement part, please note a screwdriver may be needed to install this part. |
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Vacuum
Questions & Answers for Brushbar Service Assy
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
6 of 6 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The brush bar black soft bristles that get the fine dust had worn off unevenly
Followed the graphic instructions:
1. took the brush head off the machine
2. took the floor face plate off the head
3. took out the screw that holds the support for the side of the brush
4. pulled the brush out sideways
5. cleaned the interior of the empty floor head
6. pushed in the new brush head from the open side
7. inserted the side support for the brush head and inserted the screw
8. reassembled the face plate and then
9. reattached the head to the machine.
10. tested it and it worked.
it was pretty easy. and a good chance to get cat hair out of crevices.
1. took the brush head off the machine
2. took the floor face plate off the head
3. took out the screw that holds the support for the side of the brush
4. pulled the brush out sideways
5. cleaned the interior of the empty floor head
6. pushed in the new brush head from the open side
7. inserted the side support for the brush head and inserted the screw
8. reassembled the face plate and then
9. reattached the head to the machine.
10. tested it and it worked.
it was pretty easy. and a good chance to get cat hair out of crevices.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brush was old and worn out
Easy to follow instructions
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
brushbar was worn
Replaced brushbar.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The bristles on the roller were worn away
Removed the bottom assembly
I screwed the one screw
Pulled out the roller
Replace the roller
Reassemble
I screwed the one screw
Pulled out the roller
Replace the roller
Reassemble
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
2 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
easy and convenient placing an order
Fit and worked as needed.
Guest -
July 4, 2020
Verified Purchase
To much MONEY
Worked good
Guest -
October 23, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
