Genuine OEM replacement part, this item is sold individually.
This part is used in various places in the compressors listed below.
By its part name, it is used to clamp hoses onto certain parts on the compressors.

This is a genuine Black and Decker replacement part, it is sold individually.
This part acts as a secondary air filter for the models shown below.
Its purpose is to filter out dust and debris from contaminating and damaging the motor assembly.

To remove the filter take off the front of the unit and remove the filter from the cover that it is located in.
Its a good idea to also blow out the cover to clean it out.

This is a genuine OEM replacement part, it is sold individually.
This Charger is used on the tools listed below.
When a battery is inserted into the Charger, the red indicator light will come on indicating that there is contact between the battery and the Charger.
The light will stay on as long as the battery is in the Charger and the Charger is plugged into a working outlet. It WILL NOT flash, go out or change to a different color, when the charging cycle is complete.

This is a genuine Black and Decker replacement part, it is sold individually.
The 5147239-00 works in conjunction with the 5147238-00 Prefiter.
It will collect the dust and debris that the Prefilter was not able to gather.
It will catch the dust and small debris from entering the motor and damaging it.
Once this filter becomes dirty and clogged it should be discarded, and replaced with a new one.

This is a genuine Black and Decker replacement part, it is sold individually.
The 90510938 Filter is placed inside of the 90512388 Prefilter.
Its purpose is to stop dirt and debris from entering the motor and damaging it and other internal parts.

The filter may be cleaned with an air hose a number of times, but it will soon become worn and have to be replaced.

This is a genuine Black and Decker replacement part, it is sold individually.
The 90558113 filter bag is situated behind the 90558115 pre-filter to make sure dirt and debris do not get into the motor and damage it.

It can be cleaned by blowing air through it.
It is advisable to replace it when this is done a couple of times.