Genuine Dewalt replacement part, this item is sold individually.
It is used on all the tools shown below.

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking

Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

This is a genuine Black and Decker replacement part,it is sold individually.
This is the part of the String Trimmer that contains the cutting line.
This part includes the spool and cutting line for the models shown below.
The cutting line is .065 gauge.

It is replaced by removing the spool cover and placing it inside the spool housing, then feed some line through the spool housing and replace the spool cap.

Genuine Black and Decker replacement part, this item is sold individually.
This is the part that cuts the trimmer line on the Black and Decker models listed below.
It is mounted to the trimmer guard.
It is mounted to the guard by the screw part number 681914-00.

This is a genuine OEM replacement part, it is sold individually.
This Charger is used on the tools listed below.
When a battery is inserted into the Charger, the red indicator light will come on indicating that there is contact between the battery and the Charger.
The light will stay on as long as the battery is in the Charger and the Charger is plugged into a working outlet. It WILL NOT flash, go out or change to a different color, when the charging cycle is complete.

This is a genuine Black and Decker replacement part,it is sold individually.
This is the part of the String Trimmer that contains the cutting line.
This part includes the spool and cutting line for the models shown below.
The cutting line is .065 gauge.

It is replaced by removing the spool cover and placing it inside the spool housing, then feed some line through the spool housing and replace the spool cap.

This is a genuine Black and Decker replacement part. Sold individually. This part secures the spool into the spool housing. It is released by pressing the two tabs on either side, and is reattached by lining up the tabs and pressing in. Part is made of plastic. It is commonly used in trimmers, see list below for compatibility.