Medium
15-30 minutes
This is a genuine Hoover vacuum belt. It attaches from the motor drive shaft to the brushroll agitator, spinning it when the lower nozzle is in use. This spinning allows the bristles to disturb the fibers of carpet or upholstery, loosening dirt and debris for a thorough cleaning. This flat style belt attaches to the agitator at the end with a gap in the bristles. It is sold individually. Note that the old belt will appear to be a different size due to stretching from normal use.
Belt-agitator H-38528008
OEM part for: Hoover
Part Number: H-38528008
$5.78
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Belt-agitator will fit the following 61 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Hoover
Show More Compatible ModelsThis item works with the following types of products:
- Vacuum Parts
This part replaces obsolete part #: 38528008
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Belt-agitator
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Belt was difficult to stretch and put in place.
Russell - October 22, 2021
👍 1 of 1 people found this instruction helpful
Tool Type
Vacuum
Difficulty
Hard
Time
15-30 minutes
Tools Used
, Hands
Parts Used
Used all my strength to stretch the belt onto the axle and roller beater bar, agitator.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken belt
thomas - September 29, 2021
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Replaced belt
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken Drive Belt
William - June 29, 2021
Tool Type
Vacuum
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Torx Bit Screwdriver
Parts Used
1. Unplug Vacuum and remove Lower Vacuum Brush Cover
2. Remove Sweeper Brush by prying outside edges up past clips holding brush in place.
3. Clean all dirt and debris from brush and motor areas.
4. Install belt over brush and install other end over motor.
5. Re-seat brush into plastic clips.
6. Reinstall Lower Vacuum Brush Cover.
7. Plug Vacuum into outlet and have at it!
2. Remove Sweeper Brush by prying outside edges up past clips holding brush in place.
3. Clean all dirt and debris from brush and motor areas.
4. Install belt over brush and install other end over motor.
5. Re-seat brush into plastic clips.
6. Reinstall Lower Vacuum Brush Cover.
7. Plug Vacuum into outlet and have at it!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Agitator belt broke
David - September 25, 2019
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Fingers
Parts Used
Unclipped the bottom and replaced the belt.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The power assist belt and agitator belt broke
Scott - August 10, 2018
Tool Type
Vacuum
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
I need to remove the cover in order to be able to get the belt on.
Remove four screws and then removed the cover. I was then able to pull hard enough to get the drive belt on first and then the agitator.
All is good now...
Remove four screws and then removed the cover. I was then able to pull hard enough to get the drive belt on first and then the agitator.
All is good now...
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Belts broke on Hoover Vacuum
Larry - March 2, 2018
Tool Type
Vacuum
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Removed the old belts and replaced them with new belts. New belts are a little tough to put on as they have to be stretched over the wheels. Vacuum runs like new. Well worth it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
