Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
18987431-1-M-DeWALT-883095-BEARING
Part Location Diagram of 883095 DeWALT BEARING
See part A-121 in the diagram
( Grid squares measure 1x1 inch )
18987431-1-S-DeWALT-883095-BEARING Part Location Diagram of 883095 DeWALT BEARING

BEARING 883095

Manufactured by:
DeWALT
ERP Number:
ERP18987431
Part Number:
883095
Original Equipment Manufacturer ?
$10.56
Special Order

A Bit Difficult 

1- 2 hours 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Troubleshooting

This part works with the following brands:
  • Porter Cable
  • Delta
  • DeVilbiss
  • Craftsman
This part works with the following products:
  • Reciprocating Saw
  • Sander Grinder
  • Hammer Drill
Part# 883095 replaces these:
883095, P883095,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Saw blade wobble

Russell from AURORA, Colorado

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
883095
Removed the belt cover
Removed the drive belt
Removed the pulley on the arbor side (caution left hand threaded and it is a metric nut)
Removed drive gear assembly
To remove the arbor shaft, there are two 8-32 machine screws (covered by grease) which are very tight and will most likely need to be removed using a dri ll and easy out. Replaced these philips screws with 8-32 allen head machine screws
drive gear and bearing will need to be removed using a bearing puller
Install new bearing and the drive gear using a press or long socket and hammer
install into the saw assembly in reverse order of removal

Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18987431
Manufacturer Part Number: 883095
Brand Model Number Description
Craftsman 35328640 Reciprocating Saw - Reciprocating Saw
Delta 36-085 Miter Saw - Compound Miter Saw
Delta 36-585 Miter Saw - Miter Saw
Porter Cable 735 Sander Grinder - Porter Cable 735-Type-1 Parts
Porter Cable 737 Reciprocating Saw - Tiger Saw
Porter Cable 738 Reciprocating Saw - Reciprocating Saw
Porter Cable 739 Sander Grinder - Porter Cable 739-Type-1 Parts
Porter Cable 740 Reciprocating Saw - Variable Angle Recipricating Saw
Porter Cable 741 Sander Grinder - Porter Cable 741 Parts
Porter Cable 745 Sander Grinder - Porter Cable 745 Parts
Porter Cable 747 Reciprocating Saw - 11.5 Amp VS Corded Reciprocating Saw
Porter Cable 750 Sander Grinder - Porter Cable 750 Parts
Porter Cable 753 Reciprocating Saw - Tiger Reciprocating Saw
Porter Cable 7739 Hammer Drill - 1/2&#34 Hammer Drill
Porter Cable 7750 Hammer Drill - 1/2" Hammer Drill
Porter Cable 7751 Electric Drill - Hammer Drill
Porter Cable 9375 Sander Grinder - Porter Cable 9375-Type-1 Parts
Porter Cable 9735 Sander Grinder - Porter Cable 9735-Type-1 Parts
Porter Cable 9737 Reciprocating Saw - Keyless Reciprocating Saw
Porter Cable 9739 Sander Grinder - Porter Cable 9739-Type-1 Parts
Porter Cable 9740 Reciprocating Saw - Variable Angle Recipricating Saw
Porter Cable 9741 Reciprocating Saw - Variable-Speed Quik-Change Tiger Saw
Porter Cable 9745 Reciprocating Saw - 10 Amp Tiger Saw Kit
Porter Cable 9746 Reciprocating Saw - Variable Speed Quik-Change Tiger Saw
Porter Cable 9747 Reciprocating Saw - Tiger Saw Kit
Porter Cable 9750 Reciprocating Saw - Tiger Claw Variable-Speed Quik-Change Angle Tiger Saw
Porter Cable J-7739 Hammer Drill - 1/2 In Hammer Drill
Porter Cable J-7750 Hammer Drill - 1/2 Hammer Drill
Porter Cable PC9735 Reciprocating Saw - Tiger Saw Wquikclamp
Porter Cable PC9737 Reciprocating Saw - Tiger Saw Kit Keyles
BEARING
$ 10.56
Special Order
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖