Bearing.flange 21546832

1. Removed wheel axle retainer with screwdriver
2. Slid wheel off axle
3. Hammered new wheel bearing flange onto outer wheel housing until flush
4. Greased inside of wheel
5. Slid wheel back onto axle
6. Replaced wheel axle retainer by hand

1. jacked up tractor
2. removed wheel by using pliers and a screwdriver to remove spring clip
3. removed cracked bearing using a socket and hammer to tap it out
4. used screwdriver to cleanout old built up grease
5. using socket an hammer tapped in the new bearing
6. put wheel back on, using pliers and screwd ... Read more river to install spring clip
7. placed hub on wheel
8. greased the new bearing

Removed the wheel drove out the old flanges,cleaned out the wheel hub ,packed the hub with grease,,drove it the two flanges,replaced the washers,Then mounted the wheel on the mower, a all the parts I ordered were the ones I needed, Was very easy to order as long as you have model of your machine,They were very helpful, Thank You.