eReplacementParts.com
866-322-9842
Bosch Parts
Repair Parts Home  Power Tool Parts  Bosch Parts  2610997210 Ball Bearing

Ball Bearing

Part Number: 2610997210
Bosch
Availability: 13 in stock
Price: $12.68
Quantity:
Ships within 1 business day
Product Information
Manufacturer: Bosch
Product Number: 2610997210
Classification: Part
Weight: 0.06 lbs.
Shipping: Ships Worldwide
Description:
This replacement ball bearing is an authentic OEM item that is specially designed for Bosch table saws. It is used to support and the shaft and allows it to spin freely. Because bearings experience constant pressure and heat, over time they may begin to fail compromising tools functionality and will eventually require replacement. Please note this durable metal ball bearing is sold individually.
Products Compatibility

This item works with the following types of products:

  • • Miter Saw
  • • Saw
  • • Table Saw
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Motor Housing - 1619PA8038
Ball Bearing - 2610911928
Rubber Ring - 2610996948
Washer - 2610911924
Ball Bearing - 2610997210
Carbon Brush Set - 2610997207
Spring Retaining Ring - 2610997282
Repair Difficulty:
Easy
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, allen key, snap ring pliers, gear puller/installer
The rear bearing on the armature seized and the resultant heat melted a section of the motor housing causing the table saw to lock up.
Bosch 4000 table saw repair. Remove the rear motor housing (3 Phillips screws) then uncrimp the 3 wires attached to the field winding/carbon brushes. The next step is to remove the four phillips screws that hold the motor housing to the inner gear box. Pull housing towards you to remove. I used a gear puller to remove the bad armature bearing, then proceeded to degrease and clean the armature with electromotive cleaner. Reassembly is the reverse of disassembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Ball Bearing - ( 2610997210 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Squealing Noise

Jon

I have a 4000-n -rt table saw. I bought this saw as a reconditioned saw. Lately I've been hearing this squealing noise when the saw is running and when I shut it off. I think its a bearing but I'm not sure which one . Can you give some guidance on what to do. I'm mechanically inclined and I didn't want to tear it apart without knowing which way to go.
Hi Jon,

I would agree that it is likely a bearing. It could be any one of the bearings in the saw. The only way to find it will be to disassemble the saw and inspect the bearings. There will be quite a bit of tear down to replace the bearings. I think if it were my saw I would replace all of the bearings. If one went bad the others probably are not too far behind it. There are two armature bearings. They are part numbers #2610911928 and #2610911927. There are two more bearings on the blade shaft. They are part numbers #2610996949 and #2610997210. All of these parts are available from http://www.ereplacementparts.com.

I hope this helps with your repair!

-Mark

Product Information
Manufacturer: Bosch
Product Number: 2610997210
Classification: Part
Weight: 0.06 lbs.
Shipping: Ships Worldwide
Related Products
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy