866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Outdoor Recreation Parts  Shimano Parts  RD9427 Bail Spring Guide

Bail Spring Guide

Part Number: RD9427
Shimano
Availability: 14 in stock
Price: $3.99
Quantity:
Order within the next 13 hours
and your part ships today!
Product Information
Manufacturer: Shimano
Product Number: RD9427
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Products Compatibility

This item works with the following types of products:

  • • Reel
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Reel
Parts Used:
Bail Spring Guide - RD9427
Bail Spring - RD10753
Bail Arm - RD10218
Quick-Fire Ii Trigger - RD10219
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Bail trigger worn down and rough operation
Removed the screws holding the bail arm on, watch for a small washer on the trigger side. Removed bail and cross bar the bail attached to. Removed the whole spinning housing by sliding off the central post. Cleaned and greased operating parts. Keep in mind there are two very small detent springs. One is placed in the white spacer which has a designated placement between two body posts. The other spring is tensioned by a separate body post. Replace spinning housing, removed side cover on trigger side to access auto bail close arm and spring. Pull this out and replace new parts the same configuration as was found. The small pinched side of the spring is the side the black auto bail trip bar goes in. Put back on side plate with two screws. Replace quick fire parts by two screws. Bail goes back on with one machined metal thread screw and one plastic thread screw. Grease all your parts after cleaning, including the mating faces of the new quick fire trigger parts, allows for easy break in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Reel
Parts Used:
Bail Spring Guide - RD9427
Bail Spring - RD10753
Bail Arm - RD10989
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Bail wouldn't trip
Removed bail
Removed bail arm
Replaced bail arm,spring,guide
Better than new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Reel
Parts Used:
Bail Spring Guide - RD9427
Bail Arm - RD10204
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Bail spring guide and bail arm broken
I'm not super mechanically inclined but once I figured out where the bail spring guide was supposed to go (right under the bail flipping mechanism)it was a super easy fix. Used a screw driver to remove old parts and replaced with new ones.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Bail Spring Guide - ( RD9427 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy