Sander Parts
We sell only genuine OEM parts.
OR
Popular Sander Brands
See All
Popular Sander Parts
- Manufacturer Part Number:
- 681656-4
it is an authentic high quality Makita replacement part that is specially manufactured for use with sanders and grinders. This is the insulation washer for the armature, please make sure to check appropriate diagrams for correct location and use of this item. One durable plastic washer is included per order.
- Manufacturer Part Number:
- 158324-9
This is a genuine Makita replacement part, it is sold individually.
It has a soft foam pad with a metal backing.
It has six vacuum holes for use with the 166078-4 Dust bag.
It is remove by unscrewing four 266020-6 Screws.
The sandpaper is held by two clamps on the base assembly.
- Manufacturer Part Number:
- N031653
Genuine Porter Cable replacement part includes 1 Carbon Brush with wire lead and brush spring attached.rn • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carbon brushes are wea...
- Manufacturer Part Number:
- 590936005
Genuine OEM replacement part, this item is sold individually. The purpose of the 590936005 Brake Skirt is to keep the sanding pad of the Random Orbit Sander at a slower speed so that the sander can sand the stock properly. A good time to replace the Brake Skirt is when you replace the sanding pad. Or replace it when the pad is spinning out of control at high RPM.
- Manufacturer Part Number:
- 743081-8
This hook-and-loop sander pad is a direct replacement for many Makita orbital sanders. It is a genuine Makita part, not off-brand. It features a foam body attached to a hard plastic backing plate. It also has a sturdy Velcro style bottom for use with hook-and-loop sandpaper. This pad has eight vacuum holes and is 5" in diameter. This pad is compatible with the Makita sanders listed below.
- Manufacturer Part Number:
- CM9-50-3105
- Manufacturer Part Number:
- 682502-4
This cord guard is a genuine Makita replacement part, and it is a direct replacement for a damaged or missing cord guard. Power tool cords undergo a lot of stress, and these cord guards help to alleviate some of that stress at the weakest point--right where the cord enters the tool. Over time cord guards will deteriorate and eventually require replacement. Keeping a strong cord guard on your tool ...
- Manufacturer Part Number:
- CB75
- Manufacturer Part Number:
- 56027
Genuine Dynabrade replacement part, this item is sold individually. The purpose of the 56027 Muffler is to lessen the noise of the air coming from the exhaust of the tools listed below. It will also filter out the excess oil that is in the tool. Once these Inserts get dirty and clogged they should be replaced.
- Manufacturer Part Number:
- 424131-5
This brake ring is an authentic component. It is sourced directly from the original equipment manufacturer for use with Makita sanders. The brake ring fits on top of the sander pad. Over time it may wear out or get damaged eventually requiring a replacement. It is made of high-quality plastic and is sold as an individual component. Check the diagrams of your model for the exact location and the co...
- Manufacturer Part Number:
- CB204
Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. This brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New br...
- Manufacturer Part Number:
- CB340
Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. rnThis brush set will fit the Makita tools listed at the bottom of the page.
• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can ...
Popular Sander Models
-
Dynabrade 300
-
Ingersoll Rand 313A
-
Ingersoll Rand 311A
-
Ingersoll Rand 4151
-
Makita BO5041
-
Dynabrade 600
-
Dynabrade 58603
-
Fein 72207813110
-
Dynabrade 58602
-
Makita XOB01
-
Porter Cable Type 1
-
Porter Cable Type 2
-
Dynabrade 58601
-
Flex GE5
-
Ingersoll Rand 317A
-
Dynabrade DAQ6
All Sander Brands
Shop by Popular Sander Part Types
- Sander Bearings
- Sander Brackets and Flanges
- Sander Brushes
- Sander Caps and Lids
- Sander Fans and Blowers
- Sander Gears
- Sander Handles
- Sander Hoses and Tubes
- Sander Pulleys
- Sander Seals and Gaskets
- Sander Springs and Shock Absorbers
- Sander Switches
- Sander Tune Up Kits
- Sander Valves
- Sander Wheels and Rollers
- Sander Wire Plugs and Connectors