This is a genuine replacement anvil assembly, not an aftermarket imitation. It is sourced directly from original equipment manufacturer for use with Dewalt and Porter Cable impact drivers. This is the part that the chuck is attached to. An impact driver's anvil can wear down at both the tip where bits attach and inside the housing where the hammer strikes it. If this happens to either part of the anvil, you will need to replace it. Please note, this metal part is sold individually.
To complete this repair job you will need a screwdriver set, vice and a crescent wrench or channel pliers.
• Remove the housing
• Disconnect the light wire
• Remove the anvil
• Rebuild the anvil assembly
• Mate the hammer to the motor
• Reinstall the housing
Anvil Assy. N268388
OEM part for: DeWALT, Porter Cable
Part Number: N268388
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.12 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 25 machines
DeWALT
Porter Cable
This item works with the following types of products:
- Impact Driver Parts
This part replaces obsolete part #: N114621
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Anvil Assy.
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Was no longer holding bits in.
Tool Type
Impact Driver
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pick
Driver would not hold bit
Tool Type
Impact Driver
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Precision star bit driver
I recommend trying to replace the spring first before you do anything else.
http://www.ereplacementparts.com/spring-p-956454.html
This is the spring located just under the sleeve that holds the ball bearing in place. On my driver the small section that secures the bearing had broken off from the spring.
Just follow this video and replace that spring.
https://www.youtube.com/watch?v=PQ8lSB_mP1c
Wouldn't hold and secure bits, damaged anvil and broken spring
Tool Type
Impact Driver
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, awl, pick
Parts Used
Bits falling out, new spring and ball did not fix it this time, replaced anvil
Tool Type
Impact Driver
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
Broken anvil.
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Torx
Parts Used
2. Relocate the light.
3. Pull the sleeve via the snap ring.
4. Pull the gear.
5. Remove the anvil, remove the spring and the bearing.
6. Replace the anvil, reinstall the spring and the bearing.
7. Reverse 4-1.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.