Repair Parts Home Lawn Equipment Parts Yard Man Parts Yard Man Blower Parts
Yard Man YMESV1300 (41ABESPG701) Blower Parts
How to Change the Oil in a Troy-Bilt Backpack Blower
Learn the steps of changing the oil in a Troy-Bilt backpack blower by reading this guide.
How to Replace the Short Block on a Troy-Bilt Backpack Blower
This article will walk you through the process of replacing a broken or damaged short block in a Troy-Bilt backpack blower.
How to Replace the Valve Cover on a Troy-Bilt Backpack Blower
Learn how to remove and replace a valve cover in a Troy-Bilt backpack blower in less than an hour.
How to Fix a Blower Carburetor
Reading through this article will teach you the steps of fixing a broken, damaged, or faulty blower carburetor.
Discussion for the Yard Man YMESV1300 (41ABESPG701) Blower
Post a Comment
Ask a question, answer a question, or post a comment!
Reply: Replace The Impeller
The impeller is threaded to the motor shaft. There should be a better way, but I removed the motor assy after disconnecting the two electrical plugs. While the impeller is attached you must hold the exposed shaft from the bearing end. I first tried pliers, but resorted to small vise grips (had to use sandpaper to smooth back). Tip: Use an 8MM bottom tap to clean the inside threads on the new impeller before installing. The mfg should have put square spot on the end of the motor shaft to be able to hold with a 3/16" wrench.
Question: Motor Pads
During disassembly to replace a burned out electric connector the motor pads fell out and I can't figure out exactly where they go. The parts diagram lists them as obsolete. Do I just ignore them and leave them out or is there a newer version?
thanks for your help;