How to Test a Small Engine for Spark
If your small engine isn't starting, you'll need to diagnose many issues including the spark plug. This video walks you through the steps of how to test for a spark using a spark tester.
Quick Fix: How to Clean a Spark Arrestor Screen on a Small 2-Cycle Engine
This repair article will instruct you how to repair a dirty or damaged spark arrestor on your small engine.
How to Replace the Drive Shaft on a String Trimmer
Learn how to properly replace the drive shaft on your string trimmer in less than 30 minutes.
Quick Fix: How to Replace the Spark Plug in a Small Engine
This article will help you replace the spark plug on a small engine which will help get your gas powered equipment up and running again.
Worn Trimmer Head
Time Spent Repairing:
Less than 15 minutes
Entry Date:2014-08-28 12:54:46
0 of 2 customers found these instructions helpful
Plastic trimmer head wore out after several years of reliable service.
Align hole in dust cup with hole in the center front of the gear box by turning dust cup. Insert the 5/16\" hex key into the hole in the aligned holes, through the notch in the front of the grass shield, to keep shaft from turning. (A small pin punch might also work, or possibly even a nail.) Unthread the trimmer head. Reverse the process to install the new trimmer head.
Discussion for the Weed Eater GTI19T Gas Trimmer
Post a Comment
Ask a question, answer a question, or post a comment!
Question: Fuel Lines
I would like to Know how the fuel lines go from the tank to the primer assembly to the carb,and also how many turns of the screws with springs on the carb before being to much or not enough for it to be just right on my gtI19t model weedeater, Thanks.
Reply: Fuel Lines
The small line from the tank is the supply line attach filter to it, it goes to bottom tube on carb.
The large line from tank is return line, it goes to large fitting on primer.
Small line primer goes to top tube on carb; be sure not to have too small of a gas line from primer to carb. it will crimp shut.
Question: Fuel Hose Layout
I need a description or diagram of where to connect all the fuel lines. I have replaced all the lines and can't remember where they go. DUH.
Reply: Fuel Hose Layout
I am trying to change the gas lines and primer and gas line filter on my weedeater. I am totally confused. When replacing the hoses back on the primer. I need to be sure that I am replacing the hoses properly. Is one of the hoses suppose to extend to the bottom of the gas tank? Is that the hose the filter is on? If I could get a diagram that would assure me how to hook this hose properly I would thank you so much.
Sincerely, Covie Boggs