Repair Parts Home Lawn Equipment Parts Weed Eater Parts Weed Eater Blower Parts
Weed Eater 2560 (Type 1) Electric Blower Parts
How to Change the Oil in a Troy-Bilt Backpack Blower
Learn the steps of changing the oil in a Troy-Bilt backpack blower by reading this guide.
How to Replace the Short Block on a Troy-Bilt Backpack Blower
This article will walk you through the process of replacing a broken or damaged short block in a Troy-Bilt backpack blower.
How to Replace the Valve Cover on a Troy-Bilt Backpack Blower
Learn how to remove and replace a valve cover in a Troy-Bilt backpack blower in less than an hour.
How to Fix a Blower Carburetor
Reading through this article will teach you the steps of fixing a broken, damaged, or faulty blower carburetor.
Discussion for the Weed Eater 2560 (Type 1) Electric Blower
Post a Comment
Ask a question, answer a question, or post a comment!
I have a 2560 but don't know if it is a Type "1 2 3 or 4" how do I know which switch to order? It is a two speed blower.
I have a model 2560 electric leaf blower. It has two speeds. Sometimes the high speed will not work. Don't know if it is a 1, 2,or 3 series. Will need to order the right switch for my model.
Question: Impeller Replacement
I'd like to order a new impeller, as mine has two broken blades. I took the unit apart but can not figure out how to disassemble the impeller from the motor assembly. Any suggestions?
Reply: Impeller Replacement
The impeller is simply screwed onto the motor shaft. Secure the motor shaft, underneath the impeller, with a pair of pliers. Adjustable pliers work well. Now the impeller can be screwed off of the motor shaft. The new impeller is part # 530037183 and is available from http://www.ereplacementparts.com .
Good luck with your repair!
Question: How Does Bag Work
I have been given a 2560 model but I do not know how to attach
the bag to make it suck up the leaves, can you explain please?
Reply: How Does Bag Work
Open the intake cover using a screwdriver to release the latch. Then connect the vacuum tube in that opening. Remove the blower tube and attach the bag in that opening using the Velcro to make it fit snug.