Repair Parts Home Lawn Equipment Parts Weed Eater Parts Weed Eater Attachment Parts
Weed Eater 2560 Gutter Attachment Kit Parts
How to Test a Small Engine for Spark
If your small engine isn't starting, you'll need to diagnose many issues including the spark plug. This video walks you through the steps of how to test for a spark using a spark tester.
Quick Fix: How to Clean a Spark Arrestor Screen on a Small 2-Cycle Engine
This repair article will instruct you how to repair a dirty or damaged spark arrestor on your small engine.
Quick Fix: How to Replace the Spark Plug in a Small Engine
This article will help you replace the spark plug on a small engine which will help get your gas powered equipment up and running again.
How to Replace the Fuel Filters in Your Outdoor Power Equipment
This article will help you troubleshoot your fuel-line replacement repairs.
Discussion for the Weed Eater 2560 Gutter Attachment Kit
Post a Comment
Ask a question, answer a question, or post a comment!
I have a 2560 but don't know if it is a Type "1 2 3 or 4" how do I know which switch to order? It is a two speed blower.
I have a model 2560 electric leaf blower. It has two speeds. Sometimes the high speed will not work. Don't know if it is a 1, 2,or 3 series. Will need to order the right switch for my model.
Question: Impeller Replacement
I'd like to order a new impeller, as mine has two broken blades. I took the unit apart but can not figure out how to disassemble the impeller from the motor assembly. Any suggestions?
Reply: Impeller Replacement
The impeller is simply screwed onto the motor shaft. Secure the motor shaft, underneath the impeller, with a pair of pliers. Adjustable pliers work well. Now the impeller can be screwed off of the motor shaft. The new impeller is part # 530037183 and is available from http://www.ereplacementparts.com .
Good luck with your repair!
Question: How Does Bag Work
I have been given a 2560 model but I do not know how to attach
the bag to make it suck up the leaves, can you explain please?
Reply: How Does Bag Work
Open the intake cover using a screwdriver to release the latch. Then connect the vacuum tube in that opening. Remove the blower tube and attach the bag in that opening using the Velcro to make it fit snug.