Install
Videos!

V-belt Traction - 7013936YP:Murray 360 View

Watch The
Repair Video

V-belt Traction 7013936YP

Part Number: 7013936YP

Ships within 1 business day

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 7013936.

Product Information

Description:

This is an authentic manufacturer-sourced replacement belt. It is specially designed for use with Ariens snowblowers. This is the traction belt that helps to drive the unit. Over time rubber belts tend to wear out and stretch eventually requiring replacements. When replacing this belt, make sure to clean off the drive pulleys to prolong the life of the new belt. This part is made of high-quality rubber material and is sold as an individual component. Check the owner's manual for your equipment to ensure the correct repair procedure. A wrench set and a screwdriver might be needed to perform this repair.

Warning: California's Proposition 65

Frequently Purchased With

Belt, Blower
$28.63

Compatibility

This part is compatible with the following machines:

Murray

Snapper

Expand the 81 compatible machines

Products Compatibility

This item works with the following types of products:

• Snowblower

Questions & Answers for V-belt Traction

Sort by

Looking for belt size for the traction belt and the blower belt. ThanksSteve I've never done this in the 25 years I've owned the Snapper

Steve for model number 9265 asked on 2023-11-08

Hi Steve, Thank you for the question. This Traction Belt is 3/8" x 37" and the Blower Belt Part Number: 7013937YP is 1/2" X 38". We hope this helps!

Related Parts: Belt, Blower

Repair Instructions: Submitted by Customers Like You

1 of 1 people found this instruction helpful

Tool Type:

Snowblower

Parts Used:

V-belt Traction - 7013936YP

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

The belt was wore out.

You have to take the auger belt off to get to the drive belt off

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

V-belt Traction - 7013936YP

Belt, Blower - 7013937YP

Repair Difficulty:

Easy

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Socket set, Wrench Set, Nutdriver

belt broke on snapper snow blower--30+year old 2 stage

1-take pan off bottom and belt cover 2-undo nuts holding motor down,put large screwdrivers under back of motor and tilt it up in back this will loosen belts 3- tilt entire machine up in back putting 2 large jack stands to hold it up to get belts off and on pullies.----reverse instruction and it's ready to go---it was very cold out so it took a while longer

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Rhssnb - 703185

Skid Shoe - 7037982YP

V-belt Traction - 7013936YP

Bearing and Fitting - 7051350YP

Belt, Blower (all Models With - 7013939YP

Assembly, Chain Case - 7051269YP

Cable, Left Side Clutch - 7016311YP

Repair Difficulty:

Expert

Time Spent Repairing:

More than 2 hours

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set, Professional repair recommended

Chain case (essentially the transmission) wore out due to operation hours

Professional repair recommended.
Additional parts were replaced as preventive maintenance since unit was in state of partial disassembly.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

V-belt Traction - 7013936YP

Belt, Blower - 7013937YP

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set

Auger and drive belt had worn out

1. Removed the bottom and top guard covers from the belt drive area.
2. Removed the old drive belts.
3. Installed the new drive belts.
4. Installed the top and bottom guard covers
5. Greased and checked for proper operation

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Product Information