eReplacementParts.com
Mon-Fri 7am - 1am EST
Sat-Sun 7am - 11pm EST
Checkout
Repair Parts Home    Power Tool Parts    Delta Parts    1343782 V-Belt

1343782 V-Belt

Part Number: 1343782
Delta
Availability: Discontinued

This part is no longer available from the manufacturer.
Repair Stories
0 of 0 people found this instruction helpful
Tool Type:
Drill Press
Parts Used:
Nut - 1310047
V-Belt - 1343782
Pulley - 1310048
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Wrench Set
Pulley worn
Released the tension on the belt by turning the thumb screw and pulling back on the motor. Removed the old belt. Remove the old nut from the top of the pulley, Tapped the old pulley off. Checked to make sure the spindle was still okay. Tapped the new pulley on, then tightened the new nut. Installed the new belt and set it to the correct tension.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for V-Belt - ( 1343782 )
You need to be signed in to participate in the discussion.
You need to be signed in to particupate in the discussion.
Ask a question, answer a question, or post a comment!
  • Subject:
  •  
  • Comment:
  •  
aragon
Question: V Belt For Delta 11-990

aragon

Does anybody know of a substitute for this v belt?
1352151
Question: Delta V-belt 1343782

1352151

Where can I purchase a v-belt 1343782 for my Delta 12" drill press?
Tinkerdave
Reply: Delta V-belt 1343782

Tinkerdave

Hi,
This should work. link removed Replacement V Belt 1343782 Delta Drill Press 11 990 | eBay
Hope that helps.Good luck.
Tinker
Product Information
Manufacturer: Delta
Category Number: 1343782
Classification: Part
Weight: 0.10 lbs.
Shipping: Ships Worldwide world wide shipping icon
Repair Guides
Articles:
How to Remove and Replace a Drill Press Spindle
This article will teach you to remove and replace the sindle in your drill press. You can also use these instructions fo...
August 16, 2011
How to Diagnose a Bad Power Cord or Switch
This article outlines the basics of power tool and appliance electrical diagnosis. You can use a multimeter to test tool...
October 19, 2011
fancyboxy