Product Information
Description:
It is an authentic OEM sourced item which is specifically produced for use with drills made by Delta and Black & Decker. The pin is made of metal and attaches to the table. During the installation process, a socket set might be needed to replace this part. It may become broken or bent and will need to be replaced. This is available as an individual replacement part. |
Compatibility
the 46 compatible machines
This part is compatible with the following machines:
Delta
11-900 Type 1 Drill Press
11-900 Type 1 Drill Press
11-900 Type 2 Drill Press
11-900 Type 2 Drill Press
11-950 Type 1 Drill Press
11-950 Type 1 Drill Press
11-950 Type 2 Drill Press
11-950 Type 2 Drill Press
11-950 Type 3 Drill Press
11-950 Type 3 Drill Press
11-980 Type 1 Drill Press
11-980 Type 1 Drill Press
11-985 Type 1 Drill Press
11-985 Type 1 Drill Press
11-990 Type 1 Drill Press
11-990 Type 1 Drill Press
11-990 Type 2 Drill Press
11-990 Type 2 Drill Press
11-990 Type 3 Drill Press
11-990 Type 3 Drill Press
14-040 Type 1 Drill Press
14-040 Type 1 Drill Press
11-900 Type 1 Drill Press
11-900 Type 2 Drill Press
11-900 Type 2 Drill Press
11-950 Type 1 Drill Press
11-950 Type 1 Drill Press
11-950 Type 2 Drill Press
11-950 Type 2 Drill Press
11-950 Type 3 Drill Press
11-950 Type 3 Drill Press
11-980 Type 1 Drill Press
11-980 Type 1 Drill Press
11-985 Type 1 Drill Press
11-985 Type 1 Drill Press
11-990 Type 1 Drill Press
11-990 Type 1 Drill Press
11-990 Type 2 Drill Press
11-990 Type 2 Drill Press
11-990 Type 3 Drill Press
11-990 Type 3 Drill Press
14-040 Type 1 Drill Press
14-040 Type 1 Drill Press
DP350 12" Variable-Speed Bench Drill Press
DP350 12" Variable-Speed Bench Drill Press
DP300L 12" Crosshair Laser Drill Press
DP300L 12" Crosshair Laser Drill Press
17-900 Type 1 16-1/2" Drill Press
17-900 Type 1 16-1/2" Drill Press
17-900 Type 2 16-1/2" Drill Press
17-900 Type 2 16-1/2" Drill Press
14-070 Type 1 14" Floor Drill Press
14-070 Type 1 14" Floor Drill Press
DP115 Type 1 Drill Press
DP115 Type 1 Drill Press
DP200 Type 1 10" Drill Press
DP200 Type 1 10" Drill Press
DP250 Type 1 Drill Press
DP250 Type 1 Drill Press
DP300 Type 1 12" Drill Press
DP300 Type 1 12" Drill Press
DP400 Type 1 Drill Press
DP400 Type 1 Drill Press
DP350 Type 1 12" Variable-Speed Bench Drill Press
DP350 Type 1 12" Variable-Speed Bench Drill Press
DP350 12" Variable-Speed Bench Drill Press
DP300L 12" Crosshair Laser Drill Press
DP300L 12" Crosshair Laser Drill Press
17-900 Type 1 16-1/2" Drill Press
17-900 Type 1 16-1/2" Drill Press
17-900 Type 2 16-1/2" Drill Press
17-900 Type 2 16-1/2" Drill Press
14-070 Type 1 14" Floor Drill Press
14-070 Type 1 14" Floor Drill Press
DP115 Type 1 Drill Press
DP115 Type 1 Drill Press
DP200 Type 1 10" Drill Press
DP200 Type 1 10" Drill Press
DP250 Type 1 Drill Press
DP250 Type 1 Drill Press
DP300 Type 1 12" Drill Press
DP300 Type 1 12" Drill Press
DP400 Type 1 Drill Press
DP400 Type 1 Drill Press
DP350 Type 1 12" Variable-Speed Bench Drill Press
DP350 Type 1 12" Variable-Speed Bench Drill Press
Black and Decker
Products Compatibility
This item works with the following types of products:
- • Drill
- • Drill Press
Questions & Answers for Thd. Pin
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Drill Press
Parts Used:
Repair Difficulty:
Hard
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set, Drift pin, oil tube, dentil pick, machinist vise, flashlight
The table alignment pin was bent and wouldn’t hold the table flat horizontally secure.
1. Took off the large boat that holds the table.
2. Removed the table and raised the table Platten to see the pin clearly.
3. Sat in a chair with a flashlight and removed the pin with pliers and wrench.
4. That pen can only be removed from the inside of the Armature so the platten must be removed
5. The pin broke off so I drilled into the center of the broken pin and used a drift pin to punch it out while holding it in a vice.
6. I cleaned the pin holes with oil and clean rag and inserted the new pin and put the table and Armature together.
7. I tightened the bolt and pin and tightened the table bolts and noticed everything is working perfectly now.
2. Removed the table and raised the table Platten to see the pin clearly.
3. Sat in a chair with a flashlight and removed the pin with pliers and wrench.
4. That pen can only be removed from the inside of the Armature so the platten must be removed
5. The pin broke off so I drilled into the center of the broken pin and used a drift pin to punch it out while holding it in a vice.
6. I cleaned the pin holes with oil and clean rag and inserted the new pin and put the table and Armature together.
7. I tightened the bolt and pin and tightened the table bolts and noticed everything is working perfectly now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Drill Press
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
Missing pin to drill table
Just simply replace it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information