*This part replaces obsolete part #: 5140017-28.
Product Information
Description:
| It is a genuine item that is supplied directly from the original equipment manufacturer for use with DeWALT equipment. The purpose of this switch is to control the on/off function of the tool, unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item. Keep in mind this high-quality plastic body switch is sold individually. |
Frequently Purchased With
Compatibility
Products Compatibility
This item works with the following types of products:
- • Lighting
- • Vacuum
Questions & Answers for Switch
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
3 of 3 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Switch had stopped working. Just made a vibration sound when turned on.
Removed the cover from the vacuum. Removed the black plate from the bottom of the cover to access the switch, probably 8 screws. Took a picture of the switch fully connected with my phone. Unhooked and removed the switch and installed the new one. Put everything back together. Took about 20 minutes and works like a new machine for $17.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The switch case was broken
Moved wires to the new switch and snapped it into the case. If the switch is still snapped into the vac case a small screwdriver will be needed to UN snap the switch housing
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
Switch on vacuum was intermittent
Pried switch up from vacuum.
Disconnected 4 wires from old switch and attached them to new switch
Tapped new switch in to place and that's it.
Vacuum runs like new
Disconnected 4 wires from old switch and attached them to new switch
Tapped new switch in to place and that's it.
Vacuum runs like new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Switch wore out
Took out screws to get to switch marked wires took out switch and replaced it with new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Vacuum stopped working
Replaced the curcuit board and found a burnt spot and replaced the on/off switch just because I ordered it also
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
I thought it was the switch
remove the top.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
Switch went bad in vacuum
I removed screws from the underside. Carefully took terminal wires off of the old switch. Installed the new switch and reattached the terminal wires. Reinstalled screws on the bottom of the unit and flipped the switch!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
7 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
7
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Good product, fast service
Great condition ,arrived on time
Guest -
April 3, 2023
Verified Purchase
Dewalt vacuum switch
Old switch made popping sound. Open vac, remove 8 screws, swap switch, perfect. 10 minute fix. 30 bucks. Well worth it. Shipped immediately. Thanx
Guest -
January 12, 2023
Verified Purchase
Works perfectly
The part arrived fast, was easy to install, and worked perfectly. Thanks for great service!
Guest -
February 5, 2022
Verified Purchase
Easy!
Arrived pretty quickly and worked as expected.
Guest -
August 15, 2020
Verified Purchase
Replacement switch
Reasonably priced and received it for n a timely manner. Very pleased
Guest -
June 23, 2020
Verified Purchase
So far so good
I installed this on my vacuum, it has worked.
Guest -
May 28, 2020
Verified Purchase
Dewalt Switch
Installed, still no power to the wet-vac?
Michael -
April 27, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
