Repair Parts Home    Appliance Parts    Sunbeam Parts    Sunbeam Mixer Parts    Sunbeam 2366 Stand Mixer Parts
Sunbeam 2366 Stand Mixer

 Sunbeam 2366 Stand Mixer Parts

Page A
Page B
   Page A   

 Fig # Img Part Name Availability Price
1
Front Cover Obsolete - Not Available
Part #: 084145-100-805
Discontinued
N/A
3
Handle Cover Obsolete - Not Available
Part #: 084149-001-857
Discontinued
N/A
4
Boost Switch Assembly Obsolete - Not Available
Part #: 084150-000-000
Discontinued
N/A
7
Motor Type E Obsolete - Not Available
Part #: 106356-000-000
Discontinued
N/A
7A
Mounts Gear Cover Obsolete - Not Available
Part #: 019415-000-000
Discontinued
N/A
10Whipper Retainer Obsolete - Not Available
Part #: 084163-000-805
Discontinued
N/A
11
Screw Obsolete - Not Available
Part #: 018350-005-000
Discontinued
N/A
12
Lower Housing Obsolete - Not Available
Part #: 084158-005-805
Discontinued
N/A
13
Control Knob Obsolete - Not Available
Part #: 084164-100-857
Discontinued
N/A
24
Torsion Spring Obsolete - Not Available
Part #: 084131-000-000
Discontinued
N/A
26
Lock Pin Obsolete - Not Available
Part #: 084136-000-000
Discontinued
N/A
27
Spring Obsolete - Not Available
Part #: 084137-000-000
Discontinued
N/A
33
Rubber Foot Obsolete - Not Available
Part #: 084134-000-000
Discontinued
N/A
34
Turntable Knob Obsolete - Not Available
Part #: 084140-001-857
Discontinued
N/A
35
Turntable Assembly Obsolete - Not Available
Part #: 084141-000-805
Discontinued
N/A
Fig #ImgPart NameAvailabilityPrice
36Drive Whipper Assembly
Part #: 084121-009-000
In stock
20 available
 $8.08
Add To Cart
37Center Whipper
Part #: 084124-000-000
In stock
11 available
 $6.84
Add To Cart
40
Bowl - Small - Gl. Obsolete - Not Available
Part #: 027481-000-000
Discontinued
N/A
42
Bowl, Large Glass Obsolete - Not Available
Part #: 027482-000-000
Discontinued
N/A
800Dough Hook - Outer
Part #: 084126-000-000
In stock
5 available
 $10.57
Add To Cart

Enter your engine's type number in this search field to show the parts that match your engine.

Your engine's type number is the second part of the model number stamped on your Briggs & Stratton engine (see picture).

Mixer Parts

Repair Articles

How to Replace a Broken Lift Arm on a KitchenAid Pro 6 Mixer
How to Replace a Broken Lift Arm on a KitchenAid Pro 6 Mixer

When you have a broken lift arm on your KitchenAid mixer, getting your bowl close to you mixing attachment becomes impossible. This article will help you fix the problem.
How to Replace the Speed Sensor and Control Board on a KitchenAid Pro 6 Mixer
How to Replace the Speed Sensor and Control Board on a KitchenAid Pro 6 Mixer

This article will help you diagnose and repair a bad speed sensor or control switch on your KitchenAid Pro 6 mixer.
Discussion
Discussion for the Sunbeam 2366 Stand Mixer

Post a Comment
Login or signup to comment.
Login or signup to comment.
Ask a question, answer a question, or post a comment!
  • Subject:
  •  
  • Comment:
  •  
does anyone have any new or used parts for a sunbeam 2366 mixer specifically the circuit board
1132350
Question: Parts

1132350

I need part number 22 from this diagram. It has broken where part 23 fits into it. Where can I find one? Thank you.
WJA
Reply: Parts

WJA

Hello 1132350,

Unfortunately the stand for the Sunbeam model 2366 is no longer being supplied by the manufacture. If you would like to search on line for one the part number was 084128-100-805.

Good luck,
-WJA
williesenior
Question: Sunbeam Mixmaster

williesenior

I am looking for a speed control for service number 2366.
gordyd
Reply: Sunbeam Mixmaster

gordyd

Hi williesenior,

Unfortunately there are no internal parts for this mixer. Sunbeam imports this model and they do not bring any internal parts into the country.

gordyd
what holds the front cover on the machine? I want to see why the beater on the outside does not lock in. Beater keeps falling out.
andystef
Reply: Removing Front Cover On Machine

andystef

Did you ever get an answer to your question? I have the same problem.
Andystef (3/26/11)
Moosy1
Reply: Removing Front Cover On Machine

Moosy1

1. Pull the button on the top of the beater handle slightly to the back and upward and it will slip out of the handle. It is only lightly pressed onto the switch level that it sits upon.
2. Remove one screw you will find in the recess where the button was extracted from.
3. Remove front cover. It will pivot forward from the top, and the bottom will unlatch from a stud on the bottom.
4. Look inside and note how the beater release mechanism is assembled.
4. Remove 2 screws that are now exposed.
5. Lift top part of mixer housing upward and forward, and it will come off. (This will cause the beater release mechanism to come apart.)

If the beaters do not stay in, it is most likely because the plastic spring at the end of the locking plate has become weak and/or deformed. There should not be ANY space between the locking plate and the end of track that it slides in. If there is, the spring is weak. The easiest way to fix that is to increase the size of the post that it pushes on by either wrapping it with masking tape, or perhaps some insulation off of electrical wire (if you can find some thick enough).

Posted 2/10/12
fancyboxy