Repair Forum     Repair Center    Blog
Sign In Support Shopping Cart
Authentic Parts
      Call us toll free 866-802-6383
9:00AM-8:00PM Mon-Fri, ET
9:00AM-6:00PM Sat, ET
Repair Parts Home    Power Tool Parts    Ryobi Parts    Ryobi Planer Parts    Ryobi AP-10 Planer Parts
Ryobi AP-10 Planer

 Ryobi AP-10 Planer Parts

Page A
Page B
   Page A   

 Fig # Part # Img Part Name Availability Price Qty
16831097
Aux. Handle Obsolete - Not Available
Discontinued
$0.00N/A
26120156
Spring Pin Obsolete - Not Available
Discontinued
$0.00N/A
36151418
Cover Obsolete - Not Available
Discontinued
$0.00N/A
49220620
Hex Sock Bolt M6X20 Obsolete - Not Available
Discontinued
$0.00N/A
59550600
Spring Washer M6 Obsolete - Not Available
Discontinued
$0.00N/A
66080198
Crank Handle
In stock
5 available
$13.52
89040510
Tapping Screw (S) M5X40 Obsolete - Not Available
Discontinued
$0.00N/A
96151430
Cover (L) Obsolete - Not Available
Discontinued
$0.00N/A
109404025
Spring Pin 4X25 Obsolete - Limited Quantity
In stock
1 available
$0.84
126330038
Holder Obsolete - Not Available
Discontinued
$0.00N/A
139220610
Hex Socket Head Bolt M6X10 Obsolete - Not Available
Discontinued
$0.00N/A
146100231
Key-Parallel 4X4X14 In. Obsolete - Not Available
Discontinued
$0.00N/A
156200321
Bevel Gear Obsolete - Not Available
Discontinued
$0.00N/A
169501200
Retaining Ring E-12 Obsolete - Not Available
Discontinued
$0.00N/A
176100289
Handle Shaft Obsolete - Not Available
Discontinued
$0.00N/A
Fig #Part #ImgPart NameAvailabilityPrice
189501200
Retaining Ring E-12 Obsolete - Not Available
Discontinued
$0.00N/A
196200321
Bevel Gear Obsolete - Not Available
Discontinued
$0.00N/A
206330038
Holder Obsolete - Not Available
Discontinued
$0.00N/A
229404025
Spring Pin 4X25 Obsolete - Limited Quantity
In stock
1 available
$0.84
236860053
Drive Belt
In stock
9 available
$19.05
246880604
Belt Cover Obsolete - Not Available
Discontinued
$0.00N/A
266151444
Dust Filter Obsolete - Not Available
Discontinued
$0.00N/A
299240512
Wing Bolt M5X12
In stock
2 available
$0.56
306920575
Indicator Label Obsolete - Not Available
Discontinued
$0.00N/A
316920564
Scale Obsolete - Not Available
Discontinued
$0.00N/A
326151460
Spacer
In stock
3 available
$2.01
336860119
Chain
In stock
1 available
$6.14
346860119
Chain
In stock
1 available
$6.14
356180245
Plate Spring Obsolete - Not Available
Discontinued
$0.00N/A
366080191
Roller Assembly Obsolete - Not Available
Discontinued
$0.00N/A
Fig #Part #ImgPart NameAvailabilityPrice
386151461
Silde Plate Obsolete - Not Available
Discontinued
$0.00N/A
406180238
Compression Spring Obsolete - Not Available
Discontinued
$0.00N/A
426120160
Parallel Pin-A Obsolete - Not Available
Discontinued
$0.00N/A
436120161
Parallel Pin-B Obsolete - Not Available
Discontinued
$0.00N/A
446151460
Spacer
In stock
3 available
$2.01
456950101
Scale Arrow Obsolete - Not Available
Discontinued
$0.00N/A
486130504
Feed Screw
Ships in 5 - 10 business days
$11.22
509280620
Clamp Screw M6X20 Obsolete - Not Available
Discontinued
$0.00N/A
519300600
Hex Nut (M6)
Ships in 5 - 10 business days
$0.84
529550600
Spring Washer M6 Obsolete - Not Available
Discontinued
$0.00N/A
546850269
Base
Ships in 5 - 10 business days
$95.13
556080191
Roller Assembly Obsolete - Not Available
Discontinued
$0.00N/A
566180245
Plate Spring Obsolete - Not Available
Discontinued
$0.00N/A
586390113
Stock Obsolete - Not Available
Discontinued
$0.00N/A
599406020
Spring Pin Obsolete - Not Available
Discontinued
$0.00N/A
Fig #Part #ImgPart NameAvailabilityPrice
606913581
Name Plate
Ships in 5 - 10 business days
$1.76
502-069
Carbon Brush .25" x .52" x .67"
Note: This is an aftermarket part [Learn more]
In stock
25+ available
$3.01
2006530209
Fasten Connector Obsolete - Not Available
Discontinued
$0.00N/A
2016560026
Terminal Obsolete - Not Available
Discontinued
$0.00N/A
2026560019
Terminal Obsolete - Not Available
Discontinued
$0.00N/A
2039020408
Phillips Pan Screw M4X8 Obsolete - Not Available
Discontinued
$0.00N/A
5006241153
Hex Key Wrench 3 Obsolete - Not Available
Discontinued
$0.00N/A

Enter your engine's type number in this search field to show the parts that match your engine.

Your engine's type number is the second part of the model number stamped on your Briggs & Stratton engine (see picture).

Planer Parts

Repair Articles

How to Replace the Blades on a Hand-Held Planer
How to Replace the Blades on a Hand-Held Planer

For a planer to do its job, you need to make sure the blades are as sharp as can be. This article will walk you through the steps needed to change your Planer blades so you always get the best perform...
How to Remove an Armature Bearing with a Vise
How to Remove an Armature Bearing with a Vise

This article explains one backup method for removing armature bearings when a bearing puller isn't available.
Electric Power Tool Parts 101
Electric Power Tool Parts 101

This article defines the basic parts of most power tools, explains how they work, and what to look for when they stop working.
Diagnosing Electric Power Tools 101
Diagnosing Electric Power Tools 101

This article is a troubleshooting guide for problems and malfunctions common to most electric power tools.
Repair Stories
Symptom:
Broken Bolt
Parts Used:
Part Number:
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Entry Date:2013-10-11 15:59:28
2 of 2 customers found these instructions helpful
sprocket on drive for planer
Disassemble frame and remove two sprockets that drive drive rollers, remove chain and oil, install sprocket that broke and then install chain and keeper, then reassemble chain and keeper on drive rollers. reassemble frame alligning sprockets for debth drive to original depth using marks that were make to locate sprockets when removed.
Did these repair instructions help you?
Discussion
Discussion for the Ryobi AP-10 Planer

Post a Comment
Login or signup to comment.
Login or signup to comment.
Ask a question, answer a question, or post a comment!
  • Subject:
  •  
  • Comment:
  •  
MarkSr
Question: Planer Knife Set

MarkSr

Greetings, does this knife set fit my Ryobi AP10, 10" Surface Planer?

Thank you,
Mark P. Stanish Sr.
WJA
Reply: Planer Knife Set

WJA

Hello MarkSr,

The part number AC8630 planer knife set is made for a 13 inch planer. The Ryobi AP10 is a 10 inch planer. The part number for the knife set you will need is 6660425.

Hope this helps,
-WJA
53jmk
Question: Chain Sprockets

53jmk

I can't get the sprocket to go all of the way onto the upper right hand shaft. The measurement from the bearing to the groove for the retainer spring/washer is slightly more than 3/8" but the sprockets are 1/2". I suspect that the shaft has shifted. Do I have to take the unit apart to change the spacing ? If so, how do I do that? Would it be okay to cut the sprocket dow to fit the space remaining?
Kitty
Question: Belt For Planer

Kitty

we have a planer and not sure if this is the right belt. the serial number is 011702 8943 will the replacement belt fit the one we have
WJA
Reply: Belt For Planer

WJA

Hello Kitty,

The serial number does not help to much in this situation. The belt 6860053 as far as I know has only been used on the Ryobi AP-10 Planer. Look on your machine for a tag or label with the model number on it.

-WJA
dkelly02
Question: Ryobi Planer AP-10

dkelly02

How do I change the drive belt in this planer. Thanks Don
dkelly02
Question: Ryobi Planer Drive Belt

dkelly02

What is involved in changing the V Belt in a AP-10 Ryobi Planer
I need instructions on using the Ryobi blade adjusting guide tool.
I HAVEN'T LOOKED INTO THE GEARS YET, BUT THE BOARD CHATTERS AS IT IS BEING PLANED. JUST WONDERING IF IT IS THE FRONT FEED ROLLER THAT IS WORN. THE MACHINE IS 17 YEARS OLD, AND HAS WORKED WELL UNTIL THIS PAST WEEK. FIGURES, WHEN YOU NEED IT THE MOST. ANY IDEAS [SIMPLE ONES]?
Rodney Miller
Question: Getting Pulley Off Motor

Rodney Miller

I am attempting to replace a bearing and cannot get the pulley off the armature. Do you know if it is threaded or compressed on and the easiest way to get it off?
bob
Question: Belt Replacement

bob

How do I replace the belt on my planer?
joe mcconnell
Reply: Belt Replacement

joe mcconnell

I need a belt for a AP10 planner
I have a 20 year old Ryobi AP-10 thickness planer that needs the bearings replaced. I have pulled it most of the way apart, but I can't get the drive pulley off of the motor. It looks like it is pressed on, however the manual shows a clamp screw M5 X 8 at that end of the machine.

I have cleaned the end of the pulley and looking at it under magnification I don't see an internal hex, it's just a round hole. I also tried a bearing puller, but it didn't budge, and I don't want to bugger it up by pulling too hard.

So, does anyone know how to remove this pulley. It has to come off to get the armature out of the windings, and to access the brush end bearing. Thanks.
10oops9thumbs
Reply: Ryobi Thickness Planer Repair

10oops9thumbs

It's an old post, don't know if you're still watching, but I have an AP12 with the same problem.

The pulley unscrews with left-hand threads (i.e., turn it clockwise to remove).
Slip the belt on the pulley to protect it, use a channelocks to turn while holding the shaft stationary.

The set screws you saw hold the brush holders in.
Nitwit
Reply: Ryobi Thickness Planer Repair

Nitwit

[QUOTE=10oops9thumbs;6569]It's an old post, don't know if you're still watching, but I have an AP12 with the same problem.

The pulley unscrews with left-hand threads (i.e., turn it clockwise to remove).
Slip the belt on the pulley to protect it, use a channelocks to turn while holding the shaft stationary.

The set screws you saw hold the brush holders in."
Thanks, I will give this a try.
fancyboxy