Easy
30-60 minutes
This Genuine OEM rebuild kit is designed for Bostitch Pneumatic Nailers. It fixes common problems associated with worn out seals including misfires, air leaks and sluggish performance. This performance kit contains all the necessary parts to return your Bostitch tool to like-new performance. Includes Head Valve Components, Gaskets and O-Rings.
Replacing these items you would need a set of Screwdrivers and Pliers.
Rebuild Kit RBK8
OEM part for: Bostitch
Part Number: RBK8
$55.52
In Stock
Order within the next 11 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.16 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 29 machines
Bostitch
N80SBM Pneumatic Stick Nailer View Diagrams & Manuals
N80SB Pneumatic Stick Nailer View Diagrams & Manuals
N80CBMLPAL Coil-Fed Pneumatic Nailer View Diagrams & Manuals
N80CB-1ML Coil-Fed Pneumatic Nailer View Diagrams & Manuals
N80CB Coil-Fed Pneumatic Nailer View Diagrams & Manuals
N79WW Pneumatic Stick Nailer View Diagrams & Manuals
N79RH Pneumatic Stick Nailer View Diagrams & Manuals
N79PT Pneumatic Stick Nailer View Diagrams & Manuals
N95RHN Pneumatic Stick Nailer View Diagrams & Manuals
N95162 Pneumatic Stick Nailer View Diagrams & Manuals
N90PT Pneumatic Stick Nailer View Diagrams & Manuals
N80S Type 0 Stick Nailer View Diagrams & Manuals
N80C Type 0 Coil-Fed Nailer View Diagrams & Manuals
N80CB-1 (Type 0) Angle Coil Nailer View Diagrams & Manuals
N80CB-HQ (Type 0) Coil-Fed Nailer View Diagrams & Manuals
N70CBM (Type 0) Coil-Fed Nailer Power Tool View Diagrams & Manuals
N79PT (Type 0) Stick Nailer Power Tool View Diagrams & Manuals
N79RH (Type 0) Stick Nailer Power Tool View Diagrams & Manuals
N79WW (Type 0) Stick Nailer Power Tool View Diagrams & Manuals
N80CB-1ML (Type 0) Coil-Fed Nailer Power Tool View Diagrams & Manuals
N80CB (Type 0) Coil-Fed Nailer Power Tool View Diagrams & Manuals
N80CBMLPAL (Type 0) Pallet Nailer Power Tool View Diagrams & Manuals
N80SB (Type 0) Stick Nailer Power Tool View Diagrams & Manuals
N80SBM (Type 0) Stick Nailer Power Tool View Diagrams & Manuals
N90PT (Type 0) Stick Nailer Power Tool View Diagrams & Manuals
N95162 (Type 0) Stick Nailer Power Tool View Diagrams & Manuals
N95RHN (Type 0) Stick Nailer Power Tool View Diagrams & Manuals
SDN11PTB (Type 0) Stick Nailer Power Tool View Diagrams & Manuals
SDN11RH (Type 0) Stick Nailer Power Tool View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Nailer Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
8
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
This kit was as advertised with the correct parts.
eReplacements sent the kit immediatley after the purchase. Would order from them again, Happy Camper!
Guest -
October 23, 2023
Verified Purchase
Easy to find my part, great service!
The parts were in great condition, arrived quickly, and fit perfectly. My Bostic nail gun is working like new.
Guest -
September 26, 2023
Verified Purchase
Everything I needed to get job done.
Right parts to rebuild my Bostich nail gun.
Bruce -
November 22, 2021
Verified Purchase
Worked as expected
It was everything I needed to repair the tool.
David -
August 2, 2021
Verified Purchase
Easy repair. New part worked as expected.
Right part excellent condition. Perfect fit.
Chuck -
July 27, 2020
Verified Purchase
Easy to install
All the parts I needed and works great.
Guest -
May 7, 2020
Verified Purchase
parts were correct and shipping timely
parts were correct and shipping timely
Guest -
February 4, 2020
Verified Purchase
Bostich framing hammer repair
My hammer quit, went to Bostich for parts- no joy! Found eReplacement parts, found the right parts, which was easy, got them in decent time, installed them and back in business! I'll definitely use this as a first stop for parts in the future.
Guest -
July 6, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Rebuild Kit
This rebuild kit states that it fits my Bostitch framing nailer N79RH.the nailer is over 20 years old, just want to make sure it will fit.
Ariel
for model number n79rh
asked on 2022-09-01
Hello Ariel, thank you for your question. Yes, the Kit RBK8 you had chosen is compatible with your model. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
eReplacementParts Team September 01, 2022
will the rebuilt kit for a model N80S work for my older model N80
David
for model number N80
asked on 2022-04-11
Hello David, Thank you for your inquiry. We have researched the model number you have provided and show that this part is compatible for your model, we also show the repair kit as part# ORK11. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team April 11, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Replaced the the o-rings and other worn and broken parts.
Tim - June 9, 2016
👍 7 of 7 people found this instruction helpful
Tool Type
Nailer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Power Drill, Wrench Set, Nutdriver, Adjustable Wrench
Disassemble the gun and take pictures when you do this. Lay out all of the parts you remove and match them with the parts in the rebuild kit and install the new parts. Grease and oil the inside. Unscrew the broken end cap , then screw in the new one. Soak the handle grip in hot water and stretch it on to the handle. It will still be a tight fit. Insert the screw into the exhaust cover and screw it in. Place the new labels on the gun where they belong.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Air was blowing uncontrollably from the trigger air valve.
roger - October 25, 2017
👍 3 of 3 people found this instruction helpful
Tool Type
Nailer
Difficulty
Easy
Time
More than 2 hours
Tools Used
, Allen wrench set, hammer, O-ring lubricant, small pick
Parts Used
1. Went online to find directions on disassembly.
2. Disassembled the nailer and laid out parts in order on a paper towel.
3. Cleaned all parts with an aerosol brake cleaner and compressed air.
4. Replaced all seals and O-rings using silicone lubricant.
5. Replaced the trigger air valve.
5. Reassembled the nailer.
Works better than before the trigger valve died.
2. Disassembled the nailer and laid out parts in order on a paper towel.
3. Cleaned all parts with an aerosol brake cleaner and compressed air.
4. Replaced all seals and O-rings using silicone lubricant.
5. Replaced the trigger air valve.
5. Reassembled the nailer.
Works better than before the trigger valve died.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Air kept escaping nailer
Joe - July 17, 2017
👍 3 of 3 people found this instruction helpful
Tool Type
Nailer
Difficulty
Easy
Time
30-60 minutes
Tools Used
, Allen wrench
Parts Used
Remove the four screws from the cylinder cap and remove the cap, remove the cylinder.
Match up the new parts with the old parts and install the new ones. Oil the inside. Replace the cylinder and the cap.
Match up the new parts with the old parts and install the new ones. Oil the inside. Replace the cylinder and the cap.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cylinder seal & cylinder stop broken
Ron - December 10, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Nailer
Difficulty
Easy
Time
1-2 hours
Tools Used
Wrench Set
Parts Used
Replaced all seals and o rings. About 1 hour repair time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Seals were dry rotted
Robert - October 5, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrenches
Parts Used
Took top cover off of gun and cleaned gasket. Used screwdriver to push piston out of cylinder and cleaned. Replaced rubber seals,o-rings and gaskets oiled as I reassembled. Crossed my fingers as I connected the air Rebuild kit worked perfect. Gun is as good as new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Would not fire nail - air leak at trigger
Donald - April 15, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Nailer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, allen wrenchs
Parts Used
Remove pin holding trigger in. Remove top head you'll see what to change, next take bottom off look and match the o-rings, put it all back together check everything, if ok tighten bolts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leaking air from the top
raul - May 9, 2020
Tool Type
Nailer
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Remove the four top screws and pulled the head off.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Air bypassing seals in gun and bad trigger valve
Robert - November 18, 2019
Tool Type
Nailer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Socket set, Wrench Set, Allen keys and a pick
Parts Used
Took the gun apart cleaned all the parts as it came apart and replaced o rings and trigger valve. Reassembled and voila.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Nailer seals leaking air, would not fire
bruce - April 11, 2019
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, alan wrench
Parts Used
Removed cylinder head and piston to replace O rings and seals.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Nailer stopped working.
Thomas - March 29, 2019
Tool Type
Nailer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers
Parts Used
Just used the parts to rebuild the portion of the nailer that when hitting the trigger would release the nail. Everything worked out fine.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
