Rear Cover Assembly 753-06194
Part Number: 753-06194
Order within the next 10 hours
and your part ships today!
and your part ships today!
Product Information
Description:
This rear cover assembly is a high quality item that helps to protect the motor from dust and debris. It is sourced from original equipment manufacturer for use with MTD and Bolens handheld trimmers. This assembly includes one durable black plastic cover and the three screws used to secure it. You will need a screwdriver to complete this repair. |
Frequently Purchased With
Compatibility
the 37 compatible machines
This part is compatible with the following machines:
Bolens
BL110 (41AD110G965) Trimmer
41BD110G965 (BL 110) Handheld String Trimmer
41BD160G965 (BL 160) Handheld String Trimmer
41BD110G965 (BL 110) Handheld String Trimmer
41BD160G965 (BL 160) Handheld String Trimmer
MTD
41AD160G965 Handheld Trimmer
41AD251G900 Handheld Trimmer
41AD260G900 Handheld Trimmer
MS2550 (41ADZ20C768) Trimmer
MS2550 (41BDZ20C768) Trimmer
M2510 (41ADZ03C758) 2-Cycle Gas Trimmer
M2500 (41ADZ01C758,) Gas Trimmer
MS2560 (41BDZ22C768) Gas String Trimmer
41ADZ11G799 Trimmer
41ADZ12G799 Trimmer
41BDZ12G799 Trimmer
M2560 41BDZ22C758 Gas String Trimmer
41AD251G900 Handheld Trimmer
41AD260G900 Handheld Trimmer
MS2550 (41ADZ20C768) Trimmer
MS2550 (41BDZ20C768) Trimmer
M2510 (41ADZ03C758) 2-Cycle Gas Trimmer
M2500 (41ADZ01C758,) Gas Trimmer
MS2560 (41BDZ22C768) Gas String Trimmer
41ADZ11G799 Trimmer
41ADZ12G799 Trimmer
41BDZ12G799 Trimmer
M2560 41BDZ22C758 Gas String Trimmer
RM2599 (41ADPS1C983) Misc Tool
RM2599 (41BDPS1C983) Misc Tool
RM2510 (41AD110G983) Trimmer
RM2520 (41ADZ20C983) Trimmer
RM2520 (41BDZ20C983) Trimmer
RM2520 (41CDZ20C983) Trimmer
RM2560 (41AD160G883) Trimmer
RM2560 (41AD160G983) Trimmer
RM2560 (41BD160G983) Trimmer
RM2570 (41ADZ22C983) Trimmer
RM2570 (41BDZ22C983) Trimmer
RM2570 (41CDZ22C983) Trimmer
RM2599 (41BDPS1C983) Misc Tool
RM2510 (41AD110G983) Trimmer
RM2520 (41ADZ20C983) Trimmer
RM2520 (41BDZ20C983) Trimmer
RM2520 (41CDZ20C983) Trimmer
RM2560 (41AD160G883) Trimmer
RM2560 (41AD160G983) Trimmer
RM2560 (41BD160G983) Trimmer
RM2570 (41ADZ22C983) Trimmer
RM2570 (41BDZ22C983) Trimmer
RM2570 (41CDZ22C983) Trimmer
Murray
Yard Machines
Products Compatibility
This item works with the following types of products:
- • Trimmer
Questions & Answers for Rear Cover Assembly
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
5 of 5 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Rear cover broke so lost compression
Took old cover off and put on new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 5 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The plastic cover had separated
Repair was simple. I removed the old cover only three screws hold it in place. Put the o-ring over the plastic stud type structure in the plastic cover. Installed new cover with the three new screws included in the packaging with the cover. Really simple. I found this weed eater at the dump and for less than $10 I have a weed eater... Now for sale.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Rear cover broken
Unscrewed the three screwed and put the new one on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Rear cover cracked.
Replaced the old with the new. Easy!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Rear cover broke
Remove the 3 screws install o-ring put cover on and put the screws back on and tighten them
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Could not adjust carb
Removed the screws that hold the carburetor to the engine, removed the throttle and the fuel lines. Installed the new carburetor on, connected the fuel lines and the throttle. Replaced the cracked rear cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Rear cover was burnt
Rem9ved old cover and replaced. Started right up.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Pin came loose on crankshaft and bored through rear cover.
1-remove fuel tank and cover
2-remove carb mounting and intake
3-Remove rear cover
4-replace in reverse order.
2-remove carb mounting and intake
3-Remove rear cover
4-replace in reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Cover was broken.
Removed the screws from the broken cover and replaced it with the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Nutdriver
Trimmer rear cover had hole melted in it.
Removed rear cover. Ordered new part. Part came as expected and once I placed new rear cover on trimmer it started right up no problem!
Definitely use caution removing trimmer fuel tank as not to spill.
Definitely use caution removing trimmer fuel tank as not to spill.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
2 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
0
4 stars
0
3 stars
0
2 stars
0
1 stars
2
< PREV
- 1
Worked but burned hole
Rear cover assembly helps seal up cylinder for compression, OE part burned hole thru where cylinder is located. Replaced with this one and only used it for not even an hour and it burned through again.
Guest -
August 8, 2022
Verified Purchase
eReplacementParts Team
Thank you for your review. We're sorry to hear that happened, we will be in touch soon to help fix this issue.
Not good
This part only lasted 10 minutes before it broke and the plastic melted. I'm a disabled mechanic and my weed trimmer broke, a hole burned in the plastic that went inside the combustion chamber. I took the part off checked everything out and all that was wrong was a hole letting the motor from building compression and not starting. So I ordered a new part, it did the same thing. It should not be made of plastic it can't withstand heat. If they made it out of metal it would work. I spent money for nothing what a RIP off.
Idajean -
August 3, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information