This item has been sourced from the original manufacturer to be used with pneumatic nailers from Porter Cable. The plastic pusher bearing is part of the magazine assembly. The pusher bearing is used to keep the nail pusher in line so that it guides the nails evenly. This item is sold as an individual replacement part.
Pusher Bearing A01319
OEM part for: Porter Cable
Part Number: A01319
Compatibility
This part will fit the following 3 machines
Porter Cable
This item works with the following types of products:
- Nailer Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Pusher Bearing
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Magazine pusher was not advancing nails properly
Tool Type
Nailer
Difficulty
Medium
Time
1-2 hours
Tools Used
Pliers, Wrench Set, Allen wrench set - several sizes are required
Parts Used
2. Removed the broken plastic pieces of the pusher bearings from the magazine
3. Attempted to figure out how to extract the pusher from the magazine
4. Reviewed the schematic of the gun which clearly shows 2 bearings but one article I read says only 1 is required - ordered 2
5. Determined that the pusher had to come out of the magazine from the hammer end of the magazine.
5. Determined that the spring must be detached before the pusher can be removed. was concerned that the spring had a set tension that would be difficult to re-set but that fear was not a concern as there was no tension on the spring at the position of removal.
6. Upon removal of the pusher, discovered that there are 2 additional pusher bearings on the rear of the pusher as well as the 2 on the front. It would be helpful if the schematic accurately reflected the front and back bearings and/or the parts list indicated that 4 are required for a rebuild.
7. Reassembled
Nailer will not feed properly
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Power Drill, Socket set, Allen wrenches
Parts Used
2. Line up bolt with access hole on magazine.
3. Remove bolt.
4. Install one slider on each side of pusher assembly.
5. Place and tighten bolt securing sliders in place.
6.
Nail tension spring broke
Tool Type
Nailer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Wrench Set, Nutdriver
Parts Used
2) replaced pusher bearing
3) replaced tension spring
Pusher bearings broke
Tool Type
Nailer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Wrench Set, Hex wrenches
Parts Used
Not shooting nails all the time, pusher bearing cracked.
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, Alen wrech
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.