How to Test a Small Engine for Spark
If your small engine isn't starting, you'll need to diagnose many issues including the spark plug. This video walks you through the steps of how to test for a spark using a spark tester.
How to Replace the Oiler Assembly on a Chainsaw
Follow this easy guide to make a stressful problem into an easy repair. In less than an hour you can repair the oiler assembly on your chainsaw by following this guide.
Quick Fix: How to Clean a Spark Arrestor Screen on a Small 2-Cycle Engine
This repair article will instruct you how to repair a dirty or damaged spark arrestor on your small engine.
Quick Fix: How to Replace the Spark Plug in a Small Engine
This article will help you replace the spark plug on a small engine which will help get your gas powered equipment up and running again.
Discussion for the Poulan 2900 Type 2 Gas Chainsaw
Post a Comment
Ask a question, answer a question, or post a comment!
Question: Chain 16" (952051301)
any suggestion for obtaining a replacement for this discontinued part?
Reply: Chain 16" (952051301)
According to the specs of the chain you need. If you order part number 20BPX066G It should fit your saw perfectly.
Hope this helps,
Question: Automatic Oiler
The bar oiler to oil the chain is not working. Where does it oil the chain at? How does it work?
Reply: Automatic Oiler
Oil comes out of the top slot and goes into the top hole in the bar. The bottom hole is for the adjustment screw. If you look into the top slot toward the sprocket, you can see the hole that the oil comes out of. The bar holes need to be clean along with the opening to the outside of the bar.
Question: How To Tell
How do you tell the difference between a type1,2or3 for the Poulan 2900 farmhand 2.8ci 18" gas chainsaw?
Reply: How To Tell
I had the same question, I noticed several differences, the metal claw to hold on the wood your cutting and the way the safety handle mounts. Other wise similar, mine ended up being the type 1