Medium
30-60 minutes
This is a genuine Ryobi replacement part manufactured for use with 18v drill/drivers. The motor assembly is complete, and has a geared shaft to drive the gear box of the drill/driver. The motor has two terminals that connect to the two wire switch, the motor assembly is sold individually.
Assembly Motor 230079021
OEM part for: Ryobi
Part Number: 230079021
$13.47
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 4 machines
Ryobi
P204 18 Volt Drill Driver View Diagrams & Manuals
P271 18V, 1/2" 2-Speed Drill-Driver View Diagrams & Manuals
P270 1/2-In. 2-SPEED 18 Volt Drill-Driver View Diagrams & Manuals
P270G 1/2-In. 2-SPEED 18 Volt Drill-Driver View Diagrams & Manuals
This item works with the following types of products:
- Drill Parts
This part replaces obsolete part #: 230079017, 230079009
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
fit perfect works good.
Thanks for sending it so quickly. My drill driver is working perfect again.
Guest -
May 11, 2021
Verified Purchase
Roby motor replacement
The motor fit perfectly it works perfectly how about three motors two different to drills models two of the same and the parts work perfect
Guest -
August 28, 2020
Verified Purchase
Some what of an easy repair
It would have been nice if I had instructions and then I would have not had a part left over although it seems to function OK. It probably would have went faster also.
Guest -
June 3, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Assembly Motor
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Motor burned out
Ernest - December 28, 2020
Tool Type
Cordless Drill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Solder gun
Open up drill, unsolder old motor, solder in new motor, put back together with screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor burnt out
Stanley - December 9, 2020
Tool Type
Cordless Drill
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Opened up case an took out old motor and replaced it with new one. put case back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor burn out
clifford - December 9, 2020
Tool Type
Drill
Difficulty
Medium
Time
15-30 minutes
Tools Used
, Torque bits
Parts Used
Replacement motor was ordered for the dewalt power driver .removed old motor soldered connectors reassembled new motor was a updated cross reference direct replacement with the correct drive gear already installed on the shaft.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor burned
Jorge - October 19, 2020
Tool Type
Cordless Drill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Soldering iron
Parts Used
Opened drill
Carefully remove gear assembly
Remove burnt motor, cut wires
Solder new motor to old wires.
Install motor back, align gear assembly
Instal housing and screws back
Good as new
Carefully remove gear assembly
Remove burnt motor, cut wires
Solder new motor to old wires.
Install motor back, align gear assembly
Instal housing and screws back
Good as new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor shorted out fromheavy use
Lawrence - July 9, 2020
Tool Type
Cordless Drill
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, soldering gun
Parts Used
1. Disassembled drill
2. Removed and tested trigger and motor
3. Ordered replacement motor online
4. Soldered new motor to existing wires in drill
5. Greased, checked, tested gear assembly.
6. Reassembled drill.
7. Tested drill, worked perfectly.
8. Mailed drill back to my son as a Father's Day gift!
2. Removed and tested trigger and motor
3. Ordered replacement motor online
4. Soldered new motor to existing wires in drill
5. Greased, checked, tested gear assembly.
6. Reassembled drill.
7. Tested drill, worked perfectly.
8. Mailed drill back to my son as a Father's Day gift!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor burned out
jacob - April 14, 2020
Tool Type
Cordless Drill
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Soldering iron
Parts Used
Remove the cover by undoing the screws
De-solder the leads from the old motor.
Remove the motor from the gear case by pulling it out when making sure you are not pulling out the gears
Remove the plastic locking tab piece from the old motor
Attach it to me motor
Solder the wires back. Solder the red wire to positive lead marked with a red dot
Locked the motor back in to gearbox
Close the cover
De-solder the leads from the old motor.
Remove the motor from the gear case by pulling it out when making sure you are not pulling out the gears
Remove the plastic locking tab piece from the old motor
Attach it to me motor
Solder the wires back. Solder the red wire to positive lead marked with a red dot
Locked the motor back in to gearbox
Close the cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor burned out
jerome - July 19, 2018
Tool Type
Cordless Drill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Soldering iron
Parts Used
Disassemble cordless drill remove motor Solder wire leads to new motor reassemble drill (remove defective motor carefully from gear set)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor squealing
Timothy - May 22, 2018
Tool Type
Cordless Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, soldering iron
Parts Used
Remove case screws, un-solder old motor. You do not have to dismantle the gearbox, the motor will separate from it with a partial turn. Then remove the plastic piece from the old motor and attach to the new motor. Solder the wires onto the new motor, be sure red wire matches tab with red dot. Insert the motor into the gearbox and turn to lock. Reassemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
