Repair Forum     Repair Center    Blog
Check Order Status > Sign In Support Shopping Cart
Authentic Parts
866-802-6383      Call us toll free
8:00AM-10:00PM Mon-Fri, EST
9:00AM-8:00PM Sat, EST
Repair Parts Home    Power Tool Parts    Milwaukee Parts    Milwaukee Sawzall Parts    Milwaukee 6527-21 (SER 963A) Sawzall Parts
Milwaukee 6527-21 (SER 963A) Sawzall milwaukee logo

 Milwaukee 6527-21 (SER 963A) Sawzall Parts

Page A

 Fig # Part # Img Part Name Availability Price Qty
102-04-0845
Ball Bearing
In stock
14 available
 $5.26
202-04-0911
Ball Bearing
In stock
8 available
 $5.78
302-04-1510
Ball Bearing
In stock
20 available
 $6.47
402-50-2150
Needle Bearing
In stock
3 available
 $3.99
506-55-3790
5/16-24 Spinlock Hex Nut
In stock
2 available
 $3.99
606-55-0835
8-32 Hex Nut
In stock
12 available
 $1.99
706-65-0606
3/16" X 1/2" Drivelok Pin
In stock
1 available
 $3.99
806-72-1720
Nameplate Rivet
In stock
7 available
 $1.99
906-82-7410
8-16X1-7/8" Pan Hd.Plastite Torx Screw
In stock
2 available
 $2.99
1006-82-2390
8-32 X 1-1/2" Taptite T-20
In stock
8 available
 $2.99
1105-88-8307
K50 X 22mm Pan HD. PT T-20
In stock
2 available
 $0.68
1206-82-5390
8-32 X 1-1/4" Pan HD. Sit. Tapt. T-20
In stock
5 available
 $2.99
1305-88-0302
K50 X 60mm Pan HD. PT T-20
In stock
11 available
 $1.99
1406-82-7252
8-32 X 3/8" Pan Slot Taptite Screw
In stock
24 available
 $2.99
1506-82-7270
8-16X5/8" Pan Sit. Plast Torx
In stock
25+ available
 $1.99
Fig #Part #ImgPart NameAvailabilityPrice
1706-82-7240
6-19 X .50 Pan HD. Slotted Plastite T-15
Ships in 7 - 10 business days
 $0.68
1844-60-0530
Ground Pin
In stock
2 available
 $0.68
1912-99-1730
Service Nameplate Obsolete - Not Available
Discontinued
$0.00N/A
2014-20-3020
Remote Dial Assembly
In stock
5 available
 $22.15
2114-46-1001
Foam Slug Kit
Ships in 7 - 10 business days
 $2.93
2214-74-0270
Shoe Assembly
In stock
19 available
 $22.84
2316-30-0565
120 V. Armature Obsolete - Not Available
Discontinued
$0.00N/A
2422-84-0531
Fan
In stock
2 available
 $3.99
2518-31-0500
120 V. Field
In stock
2 available
 $27.12
2622-18-0910
Carbon Brush & Spring (2 required for a set)
In stock
25+ available
 $1.99
2722-22-1380
Brush Holder Assembly
In stock
16 available
 $4.47
2822-56-0840
Pin Housing Assy. Obsolete - Not Available
Discontinued
$0.00N/A
2948-76-4008
Quik-Lok Cord Set
In stock
25+ available
 $31.93
3123-44-0190
Brush Retaining Screw
In stock
25+ available
 $2.99
3323-66-1970
Switch
In stock
25+ available
 $15.68
Fig #Part #ImgPart NameAvailabilityPrice
3428-14-2176
Gear Case
In stock
2 available
 $26.20
3528-28-1876
Diaphragm
In stock
2 available
 $16.36
3631-50-0020
Motor Housing
In stock
3 available
 $6.86
3714-67-0135
Primary Wobble Plate Assy
In stock
10 available
 $28.50
3814-67-0125
Secondary Wobble Plate Assy
In stock
3 available
 $26.66
3931-05-0055
Baffle
In stock
2 available
 $0.68
4131-44-1661
Right Handle Half
In stock
5 available
 $4.29
4231-44-1666
Left Handle Half
In stock
5 available
 $4.53
4331-52-0010
Shoe Release Lever
In stock
5 available
 $3.99
4414-46-1011
Steel Quik-Lok Blade Clamp Kit
In stock
24 available
 $17.74
4514-46-4285
Service Instruction Notice Obsolete - Not Available
Discontinued
$0.00N/A
4634-40-1280
O-Ring
In stock
1 available
 $0.68
4734-40-4200
O-Ring
In stock
8 available
 $2.99
4834-60-1315
External Retaining Ring
In stock
3 available
 $3.99
4934-80-2600
Internal Retaining Ring
In stock
2 available
 $2.99
Fig #Part #ImgPart NameAvailabilityPrice
5036-92-0701
Wobble Shaft
In stock
2 available
 $25.47
5138-50-5835
Reciprocating Spindle
In stock
2 available
 $33.08
5242-12-0150
Axle - Wobble Shaft
In stock
2 available
 $5.44
5342-24-0430
Spindle Bearing
In stock
2 available
 $5.21
5542-52-0380
Bearing Cap
In stock
3 available
 $2.99
5614-46-1011
Steel Quik-Lok Blade Clamp Kit
In stock
24 available
 $17.74
5742-87-0090
Counter Balance
In stock
2 available
 $10.30
5844-60-1200
Lock Pin
In stock
4 available
 $7.16
5944-86-0375
Seal Retainer
In stock
1 available
 $1.25
6045-06-0475
Poly-Pak Seal
In stock
2 available
 $3.99
6145-06-0501
Felt Seal
In stock
4 available
 $3.99
6245-12-0462
Gearcase Insulator Kit
In stock
2 available
 $10.76
6345-12-0470
Dust Shield
In stock
3 available
 $3.99
6445-36-1450
Spacer
In stock
2 available
 $1.38
6545-76-0320
Tube Chassis
In stock
3 available
 $7.89
Fig #Part #ImgPart NameAvailabilityPrice
6645-88-8577
Washer
In stock
3 available
 $3.99
6714-46-1011
Steel Quik-Lok Blade Clamp Kit
In stock
24 available
 $17.74
6840-50-0165
Compression Spring
In stock
5 available
 $3.99
6943-72-0176
Heat Sink Holder
In stock
2 available
 $3.99
7028-28-2000
Diaphragm Assembly Obsolete - Not Available
Discontinued
$0.00N/A
7106-95-0075
6-32X3/8" Truss HD. Taptite
In stock
4 available
 $2.99
7314-46-1011
Steel Quik-Lok Blade Clamp Kit
In stock
24 available
 $17.74
7414-46-1011
Steel Quik-Lok Blade Clamp Kit
In stock
24 available
 $17.74
7514-46-1011
Steel Quik-Lok Blade Clamp Kit
In stock
24 available
 $17.74

Enter your engine's type number in this search field to show the parts that match your engine.

Your engine's type number is the second part of the model number stamped on your Briggs & Stratton engine (see picture).

Saw Parts  Reciprocating Saw Parts

Repair Articles

How to Diagnose a Bad Power Cord or Switch
How to Diagnose a Bad Power Cord or Switch

This article outlines the basics of power tool and appliance electrical diagnosis. You can use a multimeter to test tool and appliance cords and switches, the two parts usually responsible for electri...
Power Tool Care and Maintenance 101
Power Tool Care and Maintenance 101

This article suggests guidelines for power tool care and maintenance. It also describes information tools available at eReplacementParts.com.
Repair Stories
Symptom:
Blade Holder Worn
Parts Used:
Part Number:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Entry Date:2014-08-08 11:16:32
0 of 0 customers found these instructions helpful
The clamp that holds the blade in the saw was waorn
Ereplacement has a great video on how to replace the blade clamp assembly. Made the job very easy. --- http://www.ereplacementparts.com/article/1572/How_to_Change_the_Milwaukee_Sawzall_QUIKLOK_Blade_Clamp_Assembly_.html ---
Did these repair instructions help you?
Discussion
Discussion for the Milwaukee 6527-21 (SER 963A) Sawzall

Post a Comment
Login or signup to comment.
Login or signup to comment.
Ask a question, answer a question, or post a comment!
  • Subject:
  •  
  • Comment:
  •  
Where can I get a copy of the Milwaukee 6527-21 (SER 963D) Super Sawzall Manual
WJA
Reply: Milwaukee 6527-21 (SER 963D) Sup...

WJA

Hello auto3976,

Here is a link to link removed Parts and Service Manuals. Just input your model number and select the right serial number and you can download your service manual.

Hope this helps,
-WJA
dselander
Question: Order Plastic Collar

dselander

I want to order Figure number #44

Plastic Collar: P/n 31-15-0075

It is not shown on your parts list.
How do I do this?

Doug
WJA
Reply: Order Plastic Collar

WJA

Hello Doug,

Milwaukee has made some improvements on the blade lock assembly for their Sawzall . Therefore to obtain the part you are wanting. You will need to order the upgraded kit for your saw. It is part number 14-46-1011. And it does come instructions on how to install it in your saw.

Hope this helps,
-WJA
charlie
Question: Blade Moving

charlie

blade on my sawzall moves till you put pressure on it, then it stops but the motor still runs?
rdsdbar@yahoo.com
Question: Collar Replacement For Quick Bla...

rdsdbar@yahoo.com

I cannot locate a simple replacement blade set collar locally even though I have purchased them before. The quick couple device doesn't last with my crew of tool abusers. Does anyone have a part number for this and the set screw?
Mark
Reply: Collar Replacement For Quick Bla...

Mark

Hello,

There are other models of Milwaukee Recip saws that use the non-quick release style blade clamps but the #6527-21 was only offered with the quick release clamp. The older style blade clamps will not adapt to the shaft on the #6527-21. The blade clamp kit is part #14-46-1011. We also have an article and video available showing the installation of the kit. You can find it at the following link...

http://www.ereplacementparts.com/article/1572/How_to_Change_the_Milwaukee_Sawzall_QUIKLOK_Blade_Clamp_Assembly_.html

I hope this helps!

-Mark
bobby ford
Question: Blade Broken In Saw

bobby ford

I have a Milwaukee Sawzall, Model #6527. The blade broke
off and I can't see how to get it out.
Mark
Reply: Blade Broken In Saw

Mark

Hi Bobby,

You will need to disassemble the clamp, remove the broken blade and then put the clamp back on. We have an article and video that will walk you right through the process. You can find the article and video at the following link...

http://www.ereplacementparts.com/article/1572/How_to_Change_the_Milwaukee_Sawzall_QUIKLOK_Blade_Clamp_Assembly_.html

I hope this helps with your repair!

-Mark
Robert Mccormick
Question: Power Supplu

Robert Mccormick

When I plug in my sawzall it blows a breaker. Do I start with a new cord or is it deeper.
Mark
Reply: Power Supplu

Mark

Hi Robert,

You are going to need to do a bit of testing with a multimeter. Set the multimeter to test impedance (Ohms). Start by removing the cord from the tool. Hold one of the multimeter probes to one of the prongs on the cord. Now touch the other probe to the other two prongs, one at a time. You should get no reading. If you do there is a short in the cord. Next you will need to open up the tool. One of the weak links with the quick connect cords is the connection on the tool. Inspect it for signs of overheating and melting. Use the multimeter again to test the connector for a short. It the connector tests OK then the problem will be with the switch itself.

The cord is part #48-76-4008, the connector is part #22-56-0840 and the switch is part #23-66-1970. All of these parts are available from http://ereplacementparts.com.

I hope this helps with your repair!

-Mark
I have a Milwaukee 6527-21 (SER 963C) Super Sawzall w/Quik-Lok and the quick lock fell apart. How do I get it back together?
cmoorejack
Reply: Sawzall 6527-21 Model 963C

cmoorejack

Hey Jim
How to Change the Milwaukee Sawzall QUIK-LOK Blade Clamp Assembly : eReplacementParts.com
hope this helps...
cmoorejack
fancyboxy