Repair Forum     Repair Center    Blog
Check Order Status > Sign In Support Shopping Cart
Authentic Parts
866-802-6383      Call us toll free
8:00AM-10:00PM Mon-Fri, EST
9:00AM-8:00PM Sat, EST
Repair Parts Home    Power Tool Parts    Milwaukee Parts    Milwaukee Hammer Drill Parts    Milwaukee 5370-1 (SER 672D) Magnum Two_Speed Hammer Drill Parts
Milwaukee 5370-1 (SER 672D) Magnum Two_Speed Hammer Drill milwaukee logo

 Milwaukee 5370-1 (SER 672D) Magnum Two_Speed Hammer Drill Parts

Page A

 Fig # Part # Img Part Name Availability Price Qty
106-82-7266
7-18 X 11/16" Plastite Screw T-20
In stock
7 available
 $0.68
231-15-0402
Handle Cover Obsolete - Limited Quantity
In stock
1 available
 $28.77
323-66-1666
Switch (Variable Speed With Reverse)
In stock
12 available
 $19.57
423-94-6247
2-1/4" Lead Assembly
In stock
2 available
 $0.81
514-20-0795
Remote Electronic Assembly
In stock
9 available
 $15.06
612-99-0225
Nameplate Blank
Ships in 7 - 9 business days
 $1.03
706-72-1720
Nameplate Rivet
In stock
7 available
 $0.68
822-16-0300
Carbon Brush (2 Required)
In stock
20 available
 $2.99
922-22-0356
Brush Holder Assembly
In stock
2 available
 $14.31
1031-75-0040
Brush Holder Screw
In stock
9 available
 $0.68
1122-20-0355
Brush Spring Assembly Obsolete - Not Available
Discontinued
$0.00N/A
1222-16-0300
Carbon Brush (2 Required)
In stock
20 available
 $2.99
1348-76-4008
Quik-Lok Cord Set
In stock
25+ available
 $31.93
1422-72-0100
Bearing Cup
In stock
2 available
 $0.68
1522-56-0807
Pin Housing Assembly
In stock
25+ available
 $4.75
Fig #Part #ImgPart NameAvailabilityPrice
1645-72-0081
Trigger
In stock
2 available
 $1.03
1714-38-0540
Motor Housing Assembly
In stock
3 available
 $16.43
1823-94-9960
Ground Wire Assembly Obsolete - Not Available
Discontinued
$0.00N/A
1944-60-1290
Grounding Pin
Ships in 7 - 9 business days
 $0.68
2040-50-0085
Lock Button Spring
In stock
4 available
 $0.68
2142-42-0460
Lock Button
In stock
2 available
 $0.68
2402-04-0645
Ball Bearing
In stock
8 available
 $3.20
2518-11-0075
120 Volt Field
In stock
2 available
 $23.52
2642-14-0390
Baffle
In stock
2 available
 $0.68
2706-82-7398
7 -18 X 2-1/16" Pan HD. Screw T-20
In stock
6 available
 $0.68
2816-10-0800
120 Volt Armature
In stock
2 available
 $64.09
2922-84-0880
Fan Assembly
In stock
3 available
 $1.20
3014-13-0497
Diaphragm Assembly Obsolete - Not Available
Discontinued
$0.00N/A
3202-04-0847
Ball Bearing
In stock
16 available
 $3.66
3306-65-0880
Ground Pin
Ships in 7 - 9 business days
 $0.92
Fig #Part #ImgPart NameAvailabilityPrice
3402-50-2435
.31X.50X.43 CD CSD
In stock
4 available
 $3.04
3502-50-1620
Needle Bearing
In stock
2 available
 $2.12
3645-88-7721
Thrust Washer - Heat Treated
In stock
3 available
 $0.68
3714-46-0234
Service Instruction Notice Obsolete - Not Available
Discontinued
$0.00N/A
3832-44-1390
2ND Intermediate Pinion
In stock
1 available
 $10.82
3936-66-1330
1ST Intermediate Pinion Obsolete - Not Available
Discontinued
$0.00N/A
4014-30-0382
Gearcase Assy.
Ships in 7 - 9 business days
 $16.36
4102-04-0640
Ball Bearing
In stock
5 available
 $3.89
4432-75-3410
2ND Spindle Gear Obsolete - Not Available
Discontinued
$0.00N/A
4532-75-3050
1 ST Spindle Gear
Ships in 7 - 9 business days
 $16.14
4734-40-4020
O-Ring
Ships in 7 - 9 business days
 $0.68
4845-88-0250
Washer
Ships in 7 - 9 business days
 $0.68
4945-88-7780
Spring Washer
In stock
2 available
 $0.68
5043-98-0220
Shift Knob
In stock
2 available
 $1.44
5106-81-2502
6-32X3/8" Flat HD. Phil. Screw Obsolete - Not Available
Discontinued
$0.00N/A
Fig #Part #ImgPart NameAvailabilityPrice
5206-82-7393
7 -18X 2" Pan HD. Screw T-20
In stock
6 available
 $0.68
5306-82-7524
7-18 X 3-1/2" Pan HD. Screw T-20
In stock
2 available
 $0.68
5642-52-1012
Bearing Housing
Ships in 7 - 9 business days
 $16.48
5706-82-7212
4-20X1/4" Pan HD. Plastite Torx
Ships in 7 - 9 business days
 $0.68
5944-84-0295
Ratchet
In stock
2 available
 $2.36
6002-04-1536
Ball Bearing
In stock
2 available
 $6.24
6145-88-7350
Bearing Retainer Washer Obsolete - Not Available
Discontinued
$0.00N/A
6245-88-7365
Spring Support Washer Obsolete - Not Available
Discontinued
$0.00N/A
6338-50-5297
Spindle
Ships in 7 - 9 business days
 $22.95
6445-22-0405
Sleeve
Ships in 7 - 9 business days
 $7.50
6545-88-7375
Felt Washer Obsolete - Not Available
Discontinued
$0.00N/A
6640-50-4950
Spring
Ships in 7 - 9 business days
 $0.68
6742-76-0200
Locking Collar Obsolete - Not Available
Discontinued
$0.00N/A
6814-46-5501
Side Handle Kit
In stock
2 available
 $32.33
6943-62-0842
Side Handle
In stock
2 available
 $3.09
Fig #Part #ImgPart NameAvailabilityPrice
7044-94-0161
Depth Rod
In stock
3 available
 $1.95
7106-54-0300
5/16-18 Square Nut
In stock
2 available
 $0.68
7214-46-5501
Side Handle Kit
In stock
2 available
 $32.33
7306-75-5835
5/16-18 X 4-1/2" Hex HD. Bolt
Ships in 7 - 9 business days
 $0.98
7448-66-1355
1/2 Chuck
In stock
9 available
 $74.68
7548-66-3280
Chuck Key
In stock
25+ available
 $8.13
7606-75-3155
1/4-20 X 1" Socket HD. Screw L.H. Thread
In stock
8 available
 $0.68
7748-66-4040
Chuck Key Holder
In stock
25+ available
 $3.81
7942-50-0106
Shift Cam Assy. Obsolete - Not Available
Discontinued
$0.00N/A
8040-50-7761
Compression Spring
Ships in 7 - 9 business days
 $0.68
8106-65-3680
Dowel Pin
Ships in 7 - 9 business days
 $0.68
8243-44-0913
Gasket
In stock
3 available
 $0.68

Enter your engine's type number in this search field to show the parts that match your engine.

Your engine's type number is the second part of the model number stamped on your Briggs & Stratton engine (see picture).

Drill Parts  Hammer Drill Parts

Repair Articles

How to Replace the Gear Case Assembly on a Milwaukee Cordless Hammer Drill Model 2602-20
How to Replace the Gear Case Assembly on a Milwaukee Cordless Hammer Drill Model 2602-20

Learn how to replace gear case assembly (transmission and clutch) on your Milwaukee Cordless Hammer Drill model 2602-20...
How to Remove a Stuck Drill Chuck
How to Remove a Stuck Drill Chuck

Broken gearboxes and sticky chuck screws can make removing a drill chuck difficult. This article explains the tricks you need to overcome these common repair setbacks.
Drilling, Fastening, and Hammering Power Tools
Drilling, Fastening, and Hammering Power Tools

This article lists the major categories of drilling, fastening, and hammering tools, and explains the basic applications, types, and features of each.
How to Remove a Drill Chuck
How to Remove a Drill Chuck

This article explains steps for how to remove threaded-on chucks and taper-fit drill chucks, as well as steps for removing a spindle from an open-center chuck.
Discussion
Discussion for the Milwaukee 5370-1 (SER 672D) Magnum Two_Speed Hammer Drill

Post a Comment
Login or signup to comment.
Login or signup to comment.
Ask a question, answer a question, or post a comment!
  • Subject:
  •  
  • Comment:
  •  
rditz
Question: Milwaukee 5370 Hammer Drill

rditz

Hi all, new here. I just bought a used Milwaukee 5370 hammer drill. I tested with the seller to make sure it worked, but when I got home and tried it, I discovered that it doesn't spin the chuck. I tried the chuck settings both hammer and drill, but no go.

Any thoughts on this would be greatly appreciated.

Thanks

rod
Tinkerdave
Reply: Milwaukee 5370 Hammer Drill

Tinkerdave

Hi Rod,
90% of the time this is the result of a broken dowel on the shift cam.I'm not sure of your ser: number but I think the made a kit to fix this.Hope that helps.Good luck.
Tinker
rditz
Reply: Milwaukee 5370 Hammer Drill

rditz

Thanks Tinker.. there is a tool place around the corner from my work that services Milwalkee, I will check with them.. i did notice that where the screw is that goes down the centre of the chuck, appears to have had the head drilled out.. i began to think this could also be a contributor...
thefixer
Reply: Milwaukee 5370 Hammer Drill

thefixer

watch what you buy if it is to good to be true it is. parts no longer avialable check the model online for parts the more yellow and red more junk you just bought
1031726
Question: Drill Smoking

1031726

What would make a 2 speed Milwaukee hammer drill smoke and get very hot? Could it be the armature or the 120volt field?
Tinkerdave
Reply: Drill Smoking

Tinkerdave

Hi Reno,
Yes this sounds like the armature or field.Have you looked closely at the commutator to see if they are burned?If they look ok you might need to have them both tested.Hope that helps.Good luck.
Tinker
Reno
Reply: Drill Smoking

Reno

Thank you Tinker. I will have them tested.
geskill
Question: Drill Problem

geskill

the drill only operates in reverse
Tinkerdave
Reply: Drill Problem

Tinkerdave

Hi geskill,
Milwaukee had some issues with the switches on that drill and came out with a switch kit.You will need the first four digits of the serial number from the tool to make sure you get the right updated switch kit. Hope that helps.Good luck.
Tinker
Henry F.
Question: No Power And Overheating

Henry F.

I have an older 2-speed Mag. and drilling power is getting weak. When last used, drill over heated and began to smoke slightly. Cord was adequate, and didn't apply much pressure. I hope it's only the carbon brushes, because I really like my Mag. (Replaced trigger assembly about 6 months ago.) Help?
Fred G.
Question: Dead Drill

Fred G.

The brush holder assembly fell off while using the drill. I set it back in place but the drill is dead. The brushes and springs are still there but I don't know if they need replacing. This a Magnum 2 speed hammer drill #5370-1
Mike
Question: Dead Drill

Mike

My drill just stopped working, thought it might be the switch so I replaced it. Still not working, I get voltage beyond the switch, what would be the next thing to check? I see no fuse or fuse link listed in the parts breakdown.
Thank You
joe
Reply: Dead Drill

joe

You have a problem with the remote electronic assembly.
rich98
Question: Collett Stuck

rich98

i have a drill/hammer drill.Milwalki 5370-1. ythe ring that switches from hammer drill to drill is stuck in drill mode. any ideas on a quick fix?
I have a Milwaukee Hammerdrill 5370-1 that needs the switch replaced. The old switch is obsolete. The new switch has different terminal layout. Is there a wiring diagram for the new switch?
emo325
Reply: Miwaukee 5370-1 Hammerdrill Swit...

emo325

hello! on the milwaukee magum series when purchasing a new switch it is sold as a retrofit kit for newer and older models also comes with instructions on how to connect and how to modify the handle assembly to fit the new switch. you can also go to the milwaukee power tool website they have the wiring diagrams and instructions. those are fun good luck!
Accessories
Accessories for the 5370-1

Hole Saws:
See more hole saws 
49-56-0117
2" Hole Saw - 5/8"-18 Thread
$13.44

49-56-0062
1-1/4" Hole Saw - 5/8"-18 Thread
$12.42

49-56-0193
3-1/2" Hole Saw - 5/8"-18 Thread
$18.07

fancyboxy