Repair Forum     Repair Center    Blog
Sign In Support Shopping Cart
Authentic Parts
      Call us toll free 866-802-6383
9:00AM-8:00PM Mon-Fri, ET
9:00AM-6:00PM Sat, ET
Repair Parts Home    Power Tool Parts    Milwaukee Parts    Milwaukee Drill Press Parts    Milwaukee 1675-1 (SER 413-336097) Two Speed Hole Hawg Drill Parts
Milwaukee 1675-1 (SER 413-336097) Two Speed Hole Hawg Drill milwaukee logo

 Milwaukee 1675-1 (SER 413-336097) Two Speed Hole Hawg Drill Parts

Page A

 Fig # Part # Img Part Name Availability Price Qty
106-81-8400
4-40X1/4" Pan HD. SEMS Obsolete - Not Available
Discontinued
$0.00N/A
212-98-7300
Nameplate Service
Ships in 8 - 10 business days
$4.21
306-81-6350
8-32 X 1 Fil.Hd. SEMS
Ships in 8 - 10 business days
$0.67
428-20-1126
Gear Case Cover Assembly
In stock
2 available
$32.94
502-50-3170
.50X.68X.43 FC CSD
In stock
2 available
$3.99
631-11-0100
Cam
In stock
2 available
$2.08
743-62-0122
Pipe Handle
In stock
3 available
$8.25
834-60-0827
Retaining Ring
Ships in 8 - 10 business days
$0.67
902-50-2750
Needle Bearing
Ships in 8 - 10 business days
$3.93
1002-04-0910
Ball Bearing
In stock
7 available
$3.43
1145-98-0100
Shifting Yoke
In stock
7 available
$1.86
1206-82-7252
8-32 X 3/8" Pan Slot Taptite Screw
In stock
24 available
$0.67
1345-88-7150
Thrust Washer
In stock
11 available
$0.67
1402-80-6020
Thrust Bearing
In stock
2 available
$1.18
1506-42-2000
Woodruff Key
Ships in 8 - 10 business days
$0.67
Fig #Part #ImgPart NameAvailabilityPrice
1632-10-0132
Gear Assembly
Ships in 8 - 10 business days
$39.38
1745-88-0520
Thrust Bearing Washer
In stock
2 available
$0.96
1802-80-1800
Thrust Bearing
In stock
7 available
$1.23
1932-10-0122
Clutch Gear Assy.
Ships in 8 - 10 business days
$35.57
2038-50-5001
Spindle Assembly Svce Kit
Note: Incl: Spindle, Chuck Key, Chuck Screw, and 1/2
In stock
11 available
$99.58
2106-42-1200
Woodruff Key
In stock
12 available
$0.67
2232-42-1301
1st. Intermediate Gear Obsolete - Not Available
Discontinued
$0.00N/A
2336-66-1675
Int Gear and Pinion Assy
In stock
12 available
$42.81
2436-66-4530
Gear-Finished
In stock
16 available
$51.34
2545-88-7100
Washer
Ships in 8 - 10 business days
$0.67
2638-66-4081
2nd Intermediate Pinion Obsolete - Not Available
Discontinued
$0.00N/A
2745-88-7095
Washer
In stock
3 available
$0.67
2802-50-3180
.50X.68X.50 FC CSD
Ships in 8 - 10 business days
$3.93
2902-50-2435
.31X.50X.43 CD CSD
In stock
3 available
$2.98
3031-44-1100
Spade Handle Obsolete - Limited Quantity
In stock
11 available
$9.71
Fig #Part #ImgPart NameAvailabilityPrice
3145-88-0520
Thrust Bearing Washer
In stock
2 available
$0.96
3206-75-0500
3/8-16X1" Hex HD. Screw
In stock
20 available
$0.67
3322-22-1350
Right Brush Holder Assembly
In stock
2 available
$4.04
3422-18-0670
Carbon Brush and Spring (2 Required)
In stock
25+ available
$5.90
3523-44-0220
Brush Cap (2 Required)
In stock
25+ available
$1.01
3628-50-6129
Motor Housing Assy
Ships in 8 - 10 business days
$51.22
3744-70-0160
Shifting Plunger
In stock
2 available
$1.52
3840-50-7670
Spring
Ships in 8 - 10 business days
$0.67
3902-04-1700
Ball Bearing
Ships in 8 - 10 business days
$7.92
4044-66-5241
Bearing Retainer Plate
Ships in 8 - 10 business days
$0.67
4131-55-0065
Coil Shield
Ships in 8 - 10 business days
$3.25
4206-82-7252
8-32 X 3/8" Pan Slot Taptite Screw
In stock
24 available
$0.67
4302-04-1050
Ball Bearing
In stock
25+ available
$6.01
4445-88-0330
Chuck Spacer Washer
In stock
2 available
$0.73
4548-66-1381
1/2'" Reversing Chuck
In stock
6 available
$59.24
Fig #Part #ImgPart NameAvailabilityPrice
4648-66-3280
Chuck Key
In stock
25+ available
$7.97
4748-66-4040
Chuck Key Holder
In stock
25+ available
$3.74
4806-75-3150
1/4-20 X 1" Socket HD. Screw - L.H. Thread
In stock
25+ available
$0.67
4902-04-0911
Ball Bearing
In stock
8 available
$5.67
5028-50-6235
Bearing Support Housing
Ships in 8 - 10 business days
$15.99
5106-81-6202
8-32X5/8 Fil. HD. Sem Obsolete - Not Available
Discontinued
$0.00N/A
5245-88-7110
Wavy Spring Washer
In stock
2 available
$0.67
5316-50-1076
Armature Assembly
In stock
1 available
$97.95
5442-14-0150
Baffle
Ships in 8 - 10 business days
$1.35
5506-95-3298
8-16 x 1-7/8" Plastite Pan Hd. Screw Obsolete - Not Available
Discontinued
$0.00N/A
5618-50-0076
Field
In stock
3 available
$44.88
5723-16-0425
Field Insulator
Ships in 8 - 10 business days
$2.31
5823-66-1020
On-Off Fwd/Rev Switch
In stock
19 available
$50.66
58A22-44-0090
Clip
Note: Required
In stock
25+ available
$0.67
6031-44-1497
Handle Set Service
In stock
16 available
$5.83
Fig #Part #ImgPart NameAvailabilityPrice
6144-76-0150
Cord Protector
In stock
25+ available
$1.46
6206-82-5358
12-24X3/4 PN SL Tap Torx
Ships in 8 - 10 business days
$0.67
6306-82-7326
8-16 X 1" Pan HD. Plastite Torx Screw
In stock
8 available
$0.67
6445-88-0605
Flat Washer
In stock
21 available
$0.67
6506-81-8625
6-32X1/4 Ground Screw
Ships in 8 - 10 business days
$0.67
6622-64-0121
Cord 16-3 8'
In stock
25+ available
$14.54
6743-62-0246
Handle Grip
In stock
13 available
$2.31
6831-17-0156
Cord Clamp Obsolete - Not Available
Discontinued
$0.00N/A
6906-82-7270
8-16X5/8" Pan Sit. Plast Torx
In stock
24 available
$0.67
7022-84-0660
Fan Assembly
In stock
2 available
$7.24
7122-22-1355
Left Brush Holder Assy
Ships in 8 - 10 business days
$4.38
40010-98-5986
Warning Label Obsolete - Not Available
Discontinued
$0.00N/A

Enter your engine's type number in this search field to show the parts that match your engine.

Your engine's type number is the second part of the model number stamped on your Briggs & Stratton engine (see picture).

Drill Parts  Drill Press Parts

Repair Articles

How to Remove and Replace a Drill Press Spindle
How to Remove and Replace a Drill Press Spindle

This article will teach you to remove and replace the sindle in your drill press. You can also use these instructions for other drill press repairs including installing a new quill or new bearings.
How to Replace the Adjusting Rack on a Drill Press
How to Replace the Adjusting Rack on a Drill Press

When teeth on a drill press adjusting rack break you can lose performance because the table won't adjust along its full range. This article outlines the steps necessary to replace the adjusting rack s...
How to Remove and Reinstall a Drill Press Chuck
How to Remove and Reinstall a Drill Press Chuck

Follow this article's steps and instructions to correctly remove and reinstall your drill press's chuck. View this article's video for a demonstration.
Drilling, Fastening, and Hammering Power Tools
Drilling, Fastening, and Hammering Power Tools

This article lists the major categories of drilling, fastening, and hammering tools, and explains the basic applications, types, and features of each.
Discussion
Discussion for the Milwaukee 1675-1 (SER 413-336097) Two Speed Hole Hawg Drill

Post a Comment
Login or signup to comment.
Login or signup to comment.
Ask a question, answer a question, or post a comment!
  • Subject:
  •  
  • Comment:
  •  
jrsweet
Question: Chuck Removal

jrsweet

How do I remove a defective chuck?
345881
Question: Brush Holders

345881

I need brush holders (got hot) the parts break down list's the right side assembly as 1 needed part number 22-22-1350, and the left side as needing two part number 22-22-1355, it looks to me the both right and left side are the same holder.
Thanks Rick
WJA
Reply: Brush Holders

WJA

Hello 345881,

Evan the brush holder assemblies 22-22-1350 and 22-22-1355 appear to be the same. There are differences between them. So the the left and right have to be ordered individually.

-WJA
WJA
Reply: Brush Holders

WJA

Hello 345881,

Evan the brush holder assemblies 22-22-1350 and 22-22-1355 appear to be the same. There are differences between them. So the the left and right have to be ordered individually.

-WJA
I heard that a bad spring washer is the cause. Can anyone confirm and what part number needs replaced
nathan
Question: Hole Hawg Field Short

nathan

I have a 1675-1 Milwaukee Hole Hawg, it shorted out internally and the field windings were ruined also I notice a grind mark across three of the commutator bars, probably from the short. I think I can repair it by just replacing the field and not the armature?
Any advice out there?

Thanks,
Nathan
Victor
Question: Hole Hang

Victor

I need to remove the chuck from my hole hawg to service my drill. Is there any technique to remove it easily?
TGivens
Question: Milwaukee 1675-1 Serial 413

TGivens

I broke the Spindle and will need to order a Spindle Assembly SVCE Kit 38-50-5001. How to I go about taking the tool apart to replace the Spindle?
badvette
Question: Milwaukee 1675-1

badvette

Having some trouble getting chuck off hole hawg drill. Part blow up shows one threaded and one model looks to be a tapper. Anybody have any experiance. I would like some advice before I get to aggressive with this. to be more accurate one is a 2 speed and one is a single speed..............
Thanks,
Karl
DoctorD
Reply: Milwaukee 1675-1

DoctorD

If you have the old style that has a threaded chuck ,it takes a special tool to remove it.most likely thats the 1 u have. if you have the new tapper 1 just remove screw ,add even pressure to the underside of the chuck .
badvette
Reply: Milwaukee 1675-1

badvette

[QUOTE=DoctorD;7173]If you have the old style that has a threaded chuck ,it takes a special tool to remove it.most likely thats the 1 u have. if you have the new tapper 1 just remove screw ,add even pressure to the underside of the chuck ."

Thanks Doctor D, And would this be left hand thread?
I'd be curious to see what the tool looks like. I was going to make a tool that slips over top of chuck with 3 pin that go into key holes, with a 1/2" drive for impact.
:cool:
DoctorD
Reply: Milwaukee 1675-1

DoctorD

yup left handed,and that would be half the battle.but you will need to hold the spindle inplace.if you take the gear cover off pop out the gears u will see more what to do.there is a flat in there witch is wear the tool gos
badvette
Reply: Milwaukee 1675-1

badvette

[QUOTE=DoctorD;7179]yup left handed,and that would be half the battle.but you will need to hold the spindle inplace.if you take the gear cover off pop out the gears u will see more what to do.there is a flat in there witch is wear the tool gos"

Thanks Doc, that is the tool that I need to make and make better since.
Karl
Mr. Goodtool
Question: Milwakee Hole Hawg Broken Handle...

Mr. Goodtool

Hello to all!
I'm a plumbing contractor, with two hole hawgs out of commission. Both have broken right side handles. Yes, when I have the room, I use the brace, to prevent backlash! Sometimes there is just no room... tight corners etc. FYI, this is after 11 years in business.
Milwakee in their infinite wisdom, decided to make replacement handles OBSOLETE!!!
Even on their latest version of hole hawgs.Is there a permanent repair out there you can share? or a source for replacement?:(
Thanks!
cmoorejack
Reply: Milwakee Hole Hawg Broken Handle...

cmoorejack

Hey Mr Goodtool,
Milwaukee use to have a conversion kit avail which just consisted of a new handle set with the new switch style ..match up your specific ser # with Milwaukee and they should be able to help..[the new style handle and switch should bolt right up to the housing..you may have to use different terminals and a different wiring hook up but it is possible..
also check the ser # with the parts list on eReplacementParts.com : Power Tool Parts and Tool Repair to see if they can supply..
hope this helps..?
sorry for the late response..:)
cmoorejack
plumbritela
Reply: Milwakee Hole Hawg Broken Handle...

plumbritela

[QUOTE=Mr. Goodtool;4135]Hello to all!
I'm a plumbing contractor, with two hole hawgs out of commission. Both have broken right side handles. Yes, when I have the room, I use the brace, to prevent backlash! Sometimes there is just no room... tight corners etc. FYI, this is after 11 years in business.
Milwakee in their infinite wisdom, decided to make replacement handles OBSOLETE!!!
Even on their latest version of hole hawgs.Is there a permanent repair out there you can share? or a source for replacement?:(
Thanks!"

Hey, I am a master plumber in Louisiana, I have found that Harbor Freight has a orange " hole hog"" knockoff that has full parts availiable at a way cheaper cost than milwalkee and are actually the same stuff. look online.......Jack;
I have a Milwaukee 1675-1 Hole Hawg that runs but gets very hot quickly with no load. I suspect either the armature or field is bad.

Is there a procedure for testing them?

They are fairly expensive so I don't know if it is worth replacing both of them.

Ed
Dale
Reply: Testing Field Winding And Armatu...

Dale

You can test the field with an ohmmeter. The ohms should be the same on each coil. Or very close. As for the armature. You need a growler. Look the armature over very closely for burns on any of the coil. Check for a high commutator bar or burns between the bars.
sreeb
Reply: Testing Field Winding And Armatu...

sreeb

[QUOTE=Dale;2834]You can test the field with an ohmmeter. The ohms should be the same on each coil. Or very close. As for the armature. You need a growler. Look the armature over very closely for burns on any of the coil. Check for a high commutator bar or burns between the bars."

I only have access to the field coil as a whole. I don't see any way to measure each half individually.

R = 1 ohm
L = 6 mH

Is this reasonable?

Ed
tripletdaduk
Reply: Testing Field Winding And Armatu...

tripletdaduk

hi,if youve measured correctly then no as they should both read the same,but you do need to check armature as well as both could be faulty,as one can take out the other
toolmech
Reply: Testing Field Winding And Armatu...

toolmech

You may want to check all your bearings. This could be the reason the motor is overheating. One bad bearing could cause this. There is also a small needle bearing under the first intermediate gear and pinion. Sometimes the housing cracks and can throw the first gear-pinion set out of whack.
fancyboxy